used UNICRAFT sht

weight max. in kg: 1000 kg table width: 800 mm stroke height: 190-1010 mm table length: 1300 mm stroke of worktool slide: 40 mm/sek. weight: 220 kg Furnishing: - For ergonomic work at the optimal working height - With closed platform - Separate control unit with 3 meter cable, control buttons and emergency stop switch - Stepless lifting and lowering - Stable powder-coated steel construction - Guaranteed stability - Circumferential safety strips - Meets the safety criteria of EN 1570 - High pressure cylinder with double safety function The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2000 kg table length: 1300 mm stroke height: 190-1010 mm table width: 800 mm stroke of worktool slide: 22 mm/sek. weight: 280 kg Furnishing: - For ergonomic work at the optimal working height - With closed platform - Separate control unit with 3 meter cable, control buttons and emergency stop switch - Stepless lifting and lowering - Stable powder-coated steel construction - Guaranteed stability - Circumferential safety strips - Meets the safety criteria of EN 1570 - High pressure cylinder with double safety function The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1300 mm table width: 800 mm stroke height: 190 / 1010 mm weight max. in kg: 2000 kg total power requirement: 0,75 kW weight of the machine ca.: 280 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions:: innen 1160 x 580 x 580 mm Air consumption: 400 - 800 l/min. air pressure: 3,4 - 8,0 bar workpiece weight: max. 120 kg total power requirement: 1,2 kW weight: 115 kg range L-W-H: 1225 x 935 x 1640 mm Furnishing: - Very large front flap that opens upwards - Suitable for various blasting materials * e.g. quartz, glass ball, plastic ball, etc. - With gas pressure springs for quick and easy loading and unloading - Integrated suction system with exchangeable air filter - Jet gun without a finger trigger * The air flow is controlled by a foot pedal - Two fluorescent tubes (230 volts) * in a separate housing with protective screen and exchangeable protective film - Light switch with double function: suction and cabin lighting * are switched on and off at the same time * Regulation of the working pressure via pressure regulator with manometer - Jet head (grain size 0.125 - 0.42 mm ca ...

dimensions:: innen 1160 x 870 x 850 mm Air consumption: 400 - 800 l/min. air pressure: 3,4 - 8,0 bar workpiece weight: max. 150 kg total power requirement: 1,2 kW weight: 160 kg range L-W-H: 1320 x 1200 x 1760 mm Furnishing: - Very large front flap that opens upwards - Suitable for various blasting materials * e.g. quartz, glass ball, plastic ball, etc. - Integrated suction system with exchangeable air filter - Jet gun without a finger trigger * The air flow is controlled by a foot pedal - Four fluorescent tubes (230 volts) * in a separate housing with protective screen and exchangeable protective film - Switch for suction and cabin lighting * Regulation of the working pressure via pressure regulator with manometer - Jet head (grain size 0.125 - 0.42 mm can be used) - Cross struts on the feet * easy transport with the pallet truck - Container for blasting material - dust extraction - foo ...

unicraft Generator PG 800 TRA Product Name: Synchronous Generator Type: PG 800 TRA Manufacturer: unicraft Item number: 6701083 Year of construction: 2021 Condition: New technical details drive: - Drive motor: Honda GX390 - Starter: Hand start (wire rope hoist) - Fuel type: Petrol - Tank capacity: 11 liters - Consumption at 75% load: 2.2 l/h - Sound pressure level (Lp): 72 dB(A) - Sound power level (Lw): 97 dB(A) technical details power generators: - Type: nsm-ZR100-SC Synchronous - Rated voltage: 230 / 400 V - Apparent power at LTP: 5500 / 8300 VA - Active power at LTP: 4.9 / 6.6 kW - Apparent power at COP: 4100 / 7000 VA - Active power at COP: 3.7 / 5.6 kW - Protection class of the generator: IP 23 - Sockets: 1 x 230 V Schuko, 16 A / 1 x 400 V, 16 A - Protection class of the sockets: IP 44 - short-term power up to 3 times the rated power possible (LTP = ...

lifting force: 5,0 t height: 585 mm width: 230 mm weight of the machine ca.: 25 kg Furnishing: - high precision according to the OIML R 76 standard - calibratable - Tare over the full range - works via direct display operation as well as via the remote control - Including remote control up to 10 m range and calibration function - bright and easy to read LED display with 30 mm high digits - Value can be held and frozen - The net weight can easily be determined using the tare function - Totalizing function for series weighings0 - automatic shutdown function - Overload warning on the display - Power supply via internal battery 6V / 10Ah, included in delivery, easy to swap and charge ** Model with 10 to. Lifting capacity also available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

through-put width: 580 mm working heigth: 580 mm air consumption: 400 - 800 l/min working pressure: 3,4 - 8,0 bar suction capacity: 17,4 m³/h total power requirement: 1,2 kW weight of the machine ca.: 115 kg dimensions of the machine ca.: 1225 x 935 x 1640 mm - Suitable for various blasting materials, e.g. quartz, glass ball, Plastic ball, etc. - Ideal for cleaning, derusting or removing paint from all metal parts Type, e.g. engine parts, fittings, signs, housings, rims, hinges - High-quality latex work gloves are firmly attached to the housing - Optimal visibility and occupational safety when machining workpieces because of the Window with glued protective film - Dust-free work due to all-round seals on the cover and door frames - Stable storage grid enables workpieces to be placed in the cabin interior - With drain opening for changing the blasting material - Suction pipe for the b ...

Technical details drive: - Propulsion: Yanmar L100N - Starter: E-start (starter) - Number of cylinders: 1 - Fuel type: Diesel - Fuel tank capacity: 24 litres - Engine oil: 1.65 litres - Forced lubrication - Forced cooling - Fuel consumption at 75% load: 1.4 l/h - Sound pressure level (Lp): 67 dB(A) - Sound power level (Lw): 93 dB(A) Technical details Power generator: - Nominal voltage: 230 / 400 V - Apparent power at LTP: 3,200 / 6,900 VA - Active power at LTP: 2.5 / 5.5 kW - Apparent power at COP: 3,000 / 5,600 VA - Active power at COP: 2.4 / 4.5 kW - Generator protection class: IP 23 - Sockets: 1 x 230V Schuko / 2 x 230V, 16A / 1 x 400V, 16A - Protection class of sockets: IP 44 (LTP = time-limited generator power (max. power of the generator within 500 h/year with a continuous operation of the generator of 300 h), COP = aggregate continuous output with unlimit ...

through-put width: 870 mm working heigth: 850 mm air consumption: 400 - 800 l/min working pressure: 3,4 - 8,0 bar suction capacity: 17,4 m³/h total power requirement: 1,2 kW weight of the machine ca.: 160 kg dimensions of the machine ca.: 1320 x 1200 x 1760 mm - Suitable for various blasting materials, e.g. quartz, glass ball, Plastic ball, etc. - Ideal for cleaning, derusting or removing paint from all metal parts Type, e.g. engine parts, fittings, signs, housings, rims, hinges - High-quality latex work gloves are firmly attached to the housing - Optimal visibility and occupational safety when machining workpieces because of the Window with glued protective film - Dust-free work due to all-round seals on the cover and door frames - Stable storage grid enables workpieces to be placed in the cabin interior - With drain opening for changing the blasting material - Suction pipe for the  ...

technical details: - suitable for heavy starting machines - 18 l large tank = long running time - electronic voltage regulation (AVR) - Thermo-magnetic circuit breaker against overload and short circuit due to defective loads and cables - Insulation monitoring = safe personal protection - Oil deficiency shutdown - E-Start = high comfort Metrics: - Length: approx. 842 mm - Width/depth: approx. 523 mm - Height: approx. 557 mm - Weight: approx. 96 kg Drive: - Engine: Honda GX 390 - Power factor: 0.9 cos ɸ - Starter: E-Start / Hand Start - Type of fuel: Gasoline - Tank capacity: 18 l - Consumption at 75% load: 2.2 l/h - Sound pressure level Lp: 72dB(A) - Sound power level Lw: 97 dB(A) Generator: - Type: Synchronous - Rated voltage: 230 V - Apparent power at LTP: 7.2 kVA - Active power at LTP: 6.4 kW - Apparent power at COP: 6.0 kVA - Active power at COP: 5. ...

UNICRAFT-Hand Pallet Truck-PHW-2508 Product name: PHW professional pallet truck Manafacture: Unicraft Item number: 6152512 Year of construction: 05/2023 Technical details: • Load capacity: 2.5 t • Carrying width: 540 mm • Fork width: 160 mm • Fork length: 1,150 mm • min. fork height: 85 mm • max. fork height: 200 mm • Turning radius: 1,281 mm • Steering angle: 205° • Diameter swivel castors: 200 mm • Swivel castor width: 50 mm • Diameter fork rollers: 80 mm • Fork roller width: 70 mm • Dimensions (LxWxH): 1,550 x 540 x 1,235 mm • Weight: 67 kg • Stable, robust quality • Fully hydraulic lifting and lowering device • Hydraulic pump with hard chrome-plated piston and pressure relief valve • Lowering speed infinitely adjustable via drain valve • Frame and fork in very stable and torsionally stiff shell construction • Er ...

UNICRAFT-Hand Pallet Truck-PHW-2508 Product name: PHW professional pallet truck Manafacture: Unicraft Item number: 6152512 Year of construction: 05/2023 Serial Number: 121098013092 Technical details: • Load capacity: 2.5 t • Carrying width: 540 mm • Fork width: 160 mm • Fork length: 1,150 mm • min. fork height: 85 mm • max. fork height: 200 mm • Turning radius: 1,281 mm • Steering angle: 205° • Diameter swivel castors: 200 mm • Swivel castor width: 50 mm • Diameter fork rollers: 80 mm • Fork roller width: 70 mm • Dimensions (LxWxH): 1,550 x 540 x 1,235 mm • Weight: 67 kg • Stable, robust quality • Fully hydraulic lifting and lowering device • Hydraulic pump with hard chrome-plated piston and pressure relief valve • Lowering speed infinitely adjustable via drain valve • Frame and fork in very stable and torsionally sti ...

technical details generator: - Type: Synchronous - Rated voltage: 230 V - Apparent power at LTP: 4.18 kVA - Active power at LTP (emergency power): 3.8 kW - Apparent power at COP: 3.63 kVA - Active power at COP (continuous power): 3.3 kW - Protection class generator: IP 23 - Version sockets: 2 x 230 V, Schuko - Protection class sockets: IP 44 technical details drive: - Drive: SC170B - Power factor: 0.9 cosφ - Starter: Hand start - Engine oil quantity: 0.25 (min) - 0.6 (max) liters - Fuel: Gasoline - Tank volume: 15 liters - Runtime at 50% load: 14.0 hours - Runtime at 100% load: 9.5 hours - Sound pressure level Lp: 75 dB(A) - Sound power level Lw: 96 dB(A) Dimensions and weight: Length: approx. 595 mm Width/depth: approx. 460 mm Height: approx. 527 mm Weight: approx. 55 kg Scope of delivery: - 1 x wheelset with folding handle (Changes and errors regard ...

Technical details drive: - Drive motor: Yanmar L100 Electric - Starter: E-Start - Fuel type: Diesel - Fuel tank capacity: 24 litres - Runtime at 100% load: 12.37 h - Fuel consumption at 75% load: 1.45 l/h - Oil tank capacity: 1.6 litres - Sound power level (Lw): >97 dB(A) - Power factor: 0.9 Cos ɸ Technical details Power generator: - Type: Synchronous - Nominal voltage: 230 - Apparent power at LTP: 5.9 kVA - Active power at LTP: 5.3 kW - Apparent power at COP: 4.8 kVA - Active power at COP: 4.4 kW - Generator protection class: IP 23 - Sockets: 1 x Schuko 230V 16A IP54, 1 x 2P+T CEE 230V 16A IP44, 1 x 2P+T CEE 230V 32A IP44 - Protection class of sockets: IP 44 / IP 54 - Insulation monitoring - Thermal circuit breaker - Oil monitoring - Digital display for voltmeter and hour meter (LTP = time-limited generator power (max. power of the generator within 500 h/yea ...

Hydraulic scissor lift table HYWEMA type SHT / IN Fabr. No. 52-22330 Year of construction 1996 / 2022 Technically overhauled in 2022 load capacity 4 ton. Platform size 2300 x 1200 mm Stroke max. 1420 mm Construction height - table bottom 400 mm Construction height - table top max. 1820 mm Table height with safety support 1565 mm Lifting speed 1420 mm in 30 sec. Lowering speed 1420 mm in 45 sec. Motor power 4 kW Mains connection 400 Volt, 50 Hz - Hand switch for up and down on the cable - Circumferential safety edge for lowering shutdown - Hydraulics with tank mounted in the underframe- 1 piece lifting shears with two lifting cylinders - Steel plate mounted on the lifting frame 1200 x 1200 mm x thickness 20 mm Space requirement L x W x H 2300 x 1330 x 400 mm Net weight 1.4 ton. good condition; used

Scissor lift table trolley, scissor lift table, scissor lift table, scissor lift platform, scissor lift platform, single scissor lift table, Prül assembly table, assembly table -Manufacturer: Seco, scissor lift table, rollable, type SHT35 -Load capacity: 350 kg -Platform: approx. 900 x 600 mm -Dimension retracted: height 430 mm -Dimension extended: height 1070 mm -Number: 2x lifting table available -Price per piece -Transport dimensions: 950/600/H430 mm -Own weight: 75.5 kg/pc.

480 x 320mm; 30,000 c/h; 4 x MID-WS unwinding stations; 4 X ZHF (Siguture systems); SLT station (card glue device); SHT (Gatherer Stitcher Drum); UTR delivery station; UTR-SNT gripper track; UTR SHT Delivery Station; SNT (trimming drum); UTR SNT Transfer Station; UTR-SNT gripper track carry unit UTR-SNT delivery station; missing copy delivery station (UTR); EP station; VP station; HP station ETR insert drum. Opition 2: Mid AWS (relax station); ZF SHT Feeder; UTR gripper track on 4X RAB insert feeder; 4 x VSS stations; Gripper to follow TO VP station-to ETR insert drum Still in operation: No Verf Gbar: Immediately

CNC profiling and cut-to-length line make RAS type 29.17 line 2005serial no. 10/1, year of construction 2001consisting of:a)Sheet metal/strip straightening machine RAS type 26.45, built in 2001Sheet thickness (galvanized sheet steel up to 400N/mm2): 0.5 - 1.25 mmBelt width: 500 - 1500 mmStraightening speed: 0.9 - 15 m/min.Number of straightening rollers: 6 piecesNumber of take-off rollers: 4.8 kWWeight approx.: 2.1 twith movable control panelb)Roll feeder RASBelt width :500 - 1500 mmMax. feed length: 9999.99 mmFeed accuracy per 1000 mm: 0.2 mmDrive power: 1.8 kWWeight approx.: 1250 kgwith curved infeed roller conveyorc)Cut-to-length guillotine shears RAS type 82.16, built in 2001Max. cutting length: 1640 mmMax. sheet thickness: 2.0 mmCutting angle: 1.36°Strokes per minute: 63Stand projection: 100 mmsmallest remaining strip: 35 mmTable height: 750 mmDrive power: 3.0 kWWeight approx.: 950 ...

Enveloping line KERN K40-15 is designed for film packaging of magazines, books and other similar printed products. The K40-15 is an extremely flexible system that can be easily and quickly set up to work with products of the required format. The system is able to work with great efficiency. The maximum capacity of the line is 15,000 pieces per hour. Design. The line has a modular design, including: - continuous log loader (ASH module); - main feeder (SHTH); - main conveyor (modules FM2 and FMB); - FPO cover opening (lifting) module; - two additional attached feeders RS341; - film insertion module K40-15; - culling module; - product flip module; - label sticker module; - stacker; - output conveyor