TOS su used machines

TOS Galanta SUIL 40A – Lead and Pull Spindle Lathe For sale is a well-preserved and mechanically overhauled 2009 TOS Galanta SUIL 40A lead and pull spindle lathe, built in 1998. Specifications Manufacturer: TOS Model: Galanta SUIL 40A Machine number: 0219 Year of manufacture: 1998 (mechanically overhauled 2009) Dimensions: approx. 2.2 m × 1.1 m × 1.75 m Weight: 1620 kg Main drive: 5.5 kW Spindle speed (max.): 3150 rpm Spindle bore: 50.2 mm Center spacing: 1000 mm Center height: 200 mm Turning diameter over bed: 400 mm Condition: ready for use (used) Accessories Three-jaw chuck Tailstock Lunette Coolant Setup Interchangeable Wheel Set Operating instructions (German) The machine is fully functional. Viewing possible by appointment

Swing over bed 840 mm Swing over support 530 mm Center distance 2000 mm Spindle bore 82 mm Spindle diameter in front bearing 160 mm Spindle taper - metric 100 Morse Tailstock 6 Maximum workpiece weight at the lowest speed of 6000 kg Largest blade profile 40 x 40 mm Electric motor for headstock drive 18.5 kW Machine dimensions L x W 3420 x 1880 mm Machine weight (according to the spike distance) 5700 kg

turning diameter over bed: 800 mm turning diameter over slide rest: 860 mm turning length: 6000 mm turning diameter: 800 mm swing diameter over bed slide: 800 mm swing diameter over cross slide guide: 520 mm spindle bore: 71 mm speeds: 11,2 - 1800 U/min volt: 400 V chuck: 315 mm chuck: 630 mm total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lathe TOS SUI 40-50 Center width 1500 mm Circulation over machine bed 500 mm Circulation over support 320 mm Spindle speed 14 to 2240 rpm Quick Release - Steel Bracket § Jaw wedge bar chuck Machine is ready for operation and in good condition

Ref. -No.: 10320 Manufacturer: TOS Type of control: Digitalanzeige - Mitutoyo Control: Konventionell Storage location: Halberstadt Country of origin: Tschechien Tip length: 1500 Centre Height: 280 mm Centre Distance: 750,1000,15000,2000 mm Spindle Bore: 56 mm Swing diameter over bed: 500 mm Number of speed levels: 18 Circumferential diameter over the support: 320 mm Circumferential diameter over the bed recess: 560 mm Bed length relieved from headstock: 300 mm Universal chuck diameter: 250 mm Diameter of the clamping disc: 500 mm Further information: Universal center lathe

Circumferential diameter over bed ... 840mm Turning length ... 2750mm Max.workpiece weight ... 6000kg Circumferential diameter via support ... 530mm Spindle bore... 82mm Spindle speed ... 7-900 rpm The machine is in good condition, possible to test under power.

Ref. -No.: 10316 Manufacturer: TOS Year of construction: 1996 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Slovakia Machine length: 3450 mm Machine width: 2236 mm Machine Height: 2000 mm Weight Of The Machine Ca.: 4,4 t Grinding wheel: 260 mm Table Dimensions (Lengthxwidth): 1500 x 400 mm Height of grinding with new grinding wheel (without magnetic plate): 500 mm Grinding wheel fx width x bore: 350 x 40 - 80 x 127 mm Width of the composite grinding wheel: 200 mm Max. load on the work table: 5000 N Table surface: 400x1000 / 1500 mm Max. distance of the spindle axis: 675 mm Max. length of grinding: 1000/1500 mm

Key data: 400 mm, 800 mm

For sale TOS lahe SU80/8000 y.m. 1963/2008 Diameter above the bed: 800 mm Circulating diameter above the slide: 495 mm Distance between centers: 8000 mm Machine dimensions (wxd): 1845x11175 mm Machine cca weight: 10000 kg The lathe has a lot steady rest and DRO ESSA

Surface grinder BPH 320A/1000

Tip height: 250 mm Center width: 1500 mm Circumferential Ø: over bed 500 mm Spindle bore: 56 mm Spindle mount: size 8 Pick-up cone tailstock: 6 MK Spindle speeds: 11.2 - 1400 rpm Feeds: longitudinal/flat 0.027-3.8/0.013-1.9 mm/rev Thread pitches: 0.5 - 36 mm Electrical connection: 380 V, 2 x 5.5 kW Space requirement: 3600 x 1250 x 1300/1600 mm Weight: 3000 kg

Center distance 11,000 mm Turning diameter 730 mm Drill height 500 mm turnable on the bench 1050 mm Motor power 22 kW

This 5-axis TOS Varnsdorf WHN130 was manufactured in 2007. It features a horizontal boring and milling machine with a table size of 1600 × 1800 mm and a spindle diameter of 130 mm. The machine includes a rotary table and is controlled by an NCT-104 system. Consider the opportunity to buy this TOS Varnsdorf WHN130 boring machine. Contact us for more information.

This 5-axis TOS WHN 13.8 boring machine was manufactured in 1996. It features a working spindle diameter of 130 mm, X-axis travel of 3500 mm, Y-axis travel of 2000 mm, and a Z-axis travel of 1250 mm. The rotary table clamping surface measures 2200 x 1800 mm, supporting a maximum workpiece weight of 12,000 kg. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 machine we have for sale. Contact us for more information.

This 4-axis TOS WHN 13.8 CNC boring machine was manufactured in 1980 and retrofitted in 2001. It features a working spindle diameter of 130 mm, a clamping cone 50 ISO, and a spindle speed of 2500 rpm. The machine supports a table load capacity of 12000 kg and includes SIEMENS motors and drives. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 CNC machine we have for sale. Contact us for more information.

This 4-axis TOS WFQ 80 CNC boring machine was manufactured in 2008. It features a working spindle diameter of 128 mm, a clamping taper of 50 ISO, and a spindle speed of 3500 rpm. The table can handle loads up to 5000 kg with additional supports and includes a chip conveyor and SIEMENS motors and drives. A great opportunity to buy this TOS WFQ 80 CNC boring machine. Contact us for further details regarding this boring machine.

Universal milling head, milling chuck, milling extension, angle milling head, universal angle milling head, milling angle head -Manufacturer: TOS, Universal milling angle head from TOS FB25-V milling machine -Recording output: SK50 -Recording: Input gear -Milling head: fully swivelling -Stroke: 55 mm -Recess recording: mm -Bolt circle: mm -Transport dimensions: 780/490/H430 mm -Weight: 224 kg

This 5-axis TOS WHQ 13 CNC boring machine was manufactured in 2013. It features a working spindle diameter of 130 mm, a transverse table travel of 5000 mm, and a table load capacity of 16,000 kg. The machine is equipped with a HEIDENHAIN iTNC530 control system and includes an automatic tool change system. If you are looking to get high-quality boring capabilities, consider the TOS WHQ 13 CNC machine we have for sale. Contact us for further details.

This 3-axis TOS Olomouc FV30 CNC A was manufactured in 2015. It features a spindle speed range of 50-6000 rpm and a tool changer with 12 positions. The machine has a maximum workpiece weight capacity of 360 kg and working strokes of 760 mm in the X-axis, 380 mm in the Y-axis, and 152 mm in the Z-axis. If you are looking to get high-quality machining capabilities, consider the TOS Olomouc FV30 CNC A vertical machining centre we have for sale. Contact us for further details.

This 3-axis TOS KUŘIM FS 100 S/A3 vertical machining centre was manufactured in 2002. Consider the opportunity to buy this TOS KUŘIM FS 100 S/A3 vertical machining centre. Contact us for more information.

x-travel:3500 mm y-travel:2500 mm z-travel:1250 mm w-axis:800 mm bore spindle speeds:2500 U/min table load:12 t dia. of rotary table:1800 x 2200 mm numbers of positions in the tool changer:60 ? Overhauled in 2025 and 2026 ? The spindle was relubricated and new spindle bearings fitted in 2025 by technicians from TOS Varnsdorf ? 12-month warranty and guarantee on geometric accuracy Scope of repairs to the X, Z and B axes 1. Complete dismantling and cleaning of the machine bed for the X and Z axes as well as the B axis 2. Regrinding of X and Z axis guide ways at Czech manufacturer of CNC horizontal boring machines 3. Removal of the old lining from the X- and Z-axis slides and the B-axis 4. Anchoring of re-grinded X and Z axis machine bed 5. New, hand-scraped lining made from Biplast-V on the X- and Z-axis slides, and from new Biplast-V on the B-axis 6. Installation of ball screws, lin ...

1 used Tischbohrwerk manufacturer: TOS Type: W75 1998. X-1250mm Y-900mm Z-1000mm W-560mm with 3-axis digital HEIDENHAIN Positip 855

Continuously variable speed gearbox, Variator VA31B101-72, Tos Znojmo, new Mechanical chain variator with stepless, electrical change of the ratio. - sufficiently large control range, - minimum maintenance requirements and - a simple operation Technical specifications: Drive speed: 950 rpm, Abtirebsdrehzahl: 448 to 2016 rpm Power: 2.85 to 5KW Torque: 60 to 24Nm Length: 660mm, width: 400mm, height: 580mm Weight: 145 kg State: The gearbox is brand new and was in stock as a spare part. Original packed

TOS WHN 130 MC used machine Specifications System Heidenhain TNC 426 Working range Spindle diameter 140 [mm] Taper in the spindle ISO 50 Table transverse adjustment (X) 3000 [mm] Vertical headstock adjustment (Y) 2000 [mm] Vertical travel (Z) 1250 [mm] Spindle stroke (W) 560 [mm] 2X Clamping surface 1800 x 1600 [mm] Speed range 10 - 2500 [rpm] Main motor output 37,0 [kW] Max. workpiece weightƒ 8000 [kg] Accessories Tool changer for 60pcs Tool cooling Chip conveyor

Table drilling unit W 100 A Manufacturer: TOS Varnsdorf overhauled: 20125 Spindle diameter ... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed ... 7-1120 rpm. Axis W ... 900mm Axis Z ... 1250mm ISO 50 Max table load ... 3000kg L x W x H ... 6710 x 3450 x 3000mm Machine weight ... 14000kg Main Engine Power... 11kW Total power demand ... 17kVA Clamping table area ... 1250 x 1250mm Flat disc diameter... 600mm Max circulation diameter ... 900mm The machine is possible to test under electricity, with one-year warranty.

Code 1810 DESCRIPTION CNC Universal milling machine Make TOS Model FNG 63 CNC S/N 16663 Year 1991 Control Heidenhain TNC 355 Table 1120 x 630 mm Longitude ( X – axis ) table 800 mm Vertical ( Y – axis ) table 500 mm Cross ( Z – axis ) spindle 630 mm Spindle movement ( H/V ) 100 mm Spindle taper 40 ISO Speeds 20 - 4000 rpm Feeds X-Y-Z 1 – 7500 mm/min Rapides 7,5 m/min Spindle motor 11 kW – 380 Volts Accessories Table 1120 x 630 mm Coolant Condition Machine is in normal condition