Model
(Manufacturer: TOS)
grinding diameter: 630 mm grinding length: 3000 mm : 2500 kg grinding wheel: grinding stand diameter x wid: 750x100x305 mm grinding head swivellable +/-: +30, -10 ° : 840,970 1/min : 1 mm : 3450 mm table speed -stepless-: 0.05-3.6 m/min table swivelabel +/-: +/- 5 ° Rotation speed of the work piece spindle area 1: 8 - 50 Rotation speed of the work piece spindle area 2: 50 - 315 1/min workpiece-spindle swiveling: 90 ° Motor of the grinding spindle head: 15 kW total power requirement: 31 kVA weight of the machine ca.: 15 t Equipment/Accessories: -4 flanges -Balancing stand -Various tips -Various spare parts -Paper belt filter -Technical documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length:2200 mm table width:2500 mm table load:16 t total power requirement:6,5 kW feed speeds:1,25 - 160 mm/min rapid traverse speed:2000 mm/min longitudinal adjustment:1500 mm weight of the machine ca.:12 t dimensions of the machine ca.:4,1 x 2,65 x 0,95 m Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2024, Josef Weber. All rights reserved.
x-travel:600 mm y-travel:500 mm z-travel:400 mm spindle diameter:90 mm spindle turning speed range:45 - 2000 U/min table length:1250 mm table width:200 mm groove width:14 mm table rotating:45 ° total power requirement:4,2 kW weight of the machine ca.:2000 kg dimensions of the machine ca.:2000 x 1800 x 1550 mm Year:ca.1957 Documents:vorhanden
This 3-axis TOS KUÅIM FS 100 S/A3 vertical machining centre was manufactured in 2002. Consider the opportunity to buy this TOS KUÅIM FS 100 S/A3 vertical machining centre. Contact us for more information.
Offered is a horizontal knee-type milling machine: Table clamping surface X/Y: 300mm/1250mm, travel X/Y/Z: 800mm/275mm/400mm, table load: approx. 250-300kg, T-slots: 3pieces/18mm width/63mm spacing, spindle mount: ISO40 (steep taper40), spindle speeds: 12steps, speed range: 45-2000rpm, feed range (longitudinal/transverse): 14-900mm/min, feed range (vertical): 4-250mm/min, machine weight max.: approx. 2400kg, machine dimensions X/Y/Z: approx. 2000mm/1700mm/1700mm. Inspection possible by appointment.
turning diameter over bed: 20 mm turning diameter over slide rest: 1200 mm turning length: 3.000 mm centre distance: 3000 mm digital readout: 4 - Achsen bed width: 800 mm spindle bore: 122 mm turning speed range: 1,80 - 355 U/min power requirement: 22 kW 3-jaw-chuck diameter: mm taper in tailstock-quill: 100 (1:20) dia. of quill: 150 mm quill stroke: 350 mm coolant: voltage: 400 V total power requirement: 31 kW spindle nose: Gr. 11, DIN 55027 weight of the machine ca.: 10 t dimensions of the machine ca.: 8,20 x 2,20 x 2,20 m - Serial No.: 75.217 - Rapid feed for carriage - 4-Axis DRO-System SINO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 630 mm grinding length: 3000 mm workpiece weight: 2500 kg grinding wheel diameter: 750 mm voltage: 400 V Control: total power requirement: kW weight of the machine ca.: t Table Swivel 5° - 0° - 5° Internal Grinding Attachment Marposs Steadies Dresser Coolant The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS ...
Bezel, stick, lynette -max. passage: Ø 107 mm -Tip height: 180 mm -Edition: gray cast iron -Technical drawing in the photos -Dimensions: 370/340/H80 mm -Weight: 16 kg
Tailstock counter bearing for dividing head, dividing apparatus -Peak height: 95-115 mm -Recording: MK2 -Dimensions: 180/100/H110 mm -Weight: 4 kg
Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 135 mm -Recording: MK2 -Drawing with the photos -Price: per piece -Number: 2 pieces -Dimensions: 200/75/H145 mm -Weight: 5 kg
Drill press, bench drill, column drill, pillar drill -Manufacturer: TOS, high-performance column drilling machine type 40 TF / C -Motor: MEZ 2.2 kW -Speeds: 56 - 2240 rpm -Table size: 400 x 315 mm, travel 600 mm -spindle taper: MK4 -Spindle stroke: 165 mm -Projection: 290 mm -Pillar Ø: 140 mm -Dimensions: 1200/650 / H1990 mm -Weight: 602 kg
Bezel, stick, lynette -Max. Passage: Ø 107 mm -Tip height: 180 mm -Edition: gray cast iron -technical drawing with the photos -Dimensions: 370/340/H80 mm -Weight: 16 kg
Moving bezel, moving bezel, resting stick, lynette -Manufacturer: TOS for lathe type SUS80 -Max. Passage: Ø 200 mm -Plating: brass -Top height: 230 mm -Drawings for the photos -Quantity: 1 piece -Dimensions: 530/200/H740 mm -Weight: 100kg
Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Accessories for: tool grinding machine -Adjustment: SK50 -Tip height: 145 mm -Part head: swiveling, rotatable -Dimensions: 220/220/H285 mm -Weight: 17 kg
Dividing head, dividing head, rotary table, rotating table -with translation: 1:40 -Indoor recording: MK4 -Peak height: mm -Passage: Ø 32 mm -Dividing head: swiveling -Dimensions: 430/430/H280 mm -Weight: 83 kg
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 120 mm -Edition: gray cast iron -Hole spacing: 135 mm -Tip height: 145 mm -Drawing with the photos -Dimensions: 370/280/H90 mm -Weight: 10 kg
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 120 mm -Edition: gray cast iron -Hole spacing: 135 mm -Tip height: 145 mm -Drawing with the photos -Number: 3x bezels available -Price: per piece -Dimensions: 370/280/H90 mm -Weight: 10 kg
Three-jaw chuck, three-jaw lathe chuck -Manufacturer: TOS, three-jaw chuck chuck size Ø 125 mm -Passage: Ø 35 mm -Bolt circle: Ø 108 mm -Accessories: incl. 2nd set of interchangeable jaws -Dimensions: Ø125 x 70 mm -Weight: 4.1 kg
Copy head, copying head, copying device, copying lathe -Heavy copy head for: lathe -without: hydraulic unit -Guide rails: 2 -and: accessories -Dimensions: 1100/170/H370 mm -Weight: 143 kg
Clamping table, clamping angle, T-slot table, rotary table, circular grinding unit, milling machine table -Attachment for a: TOS universal grinding machine -Table surface: 490 x 190 mm -T slots: 2 -Clamping table: rotatable, swiveling, movable -Dimensions: 490/190/H290 mm -Weight: 31 kg
Universal milling head, milling chuck, milling extension, angle milling head, universal angle milling head, milling angle head -Manufacturer: TOS, Universal milling angle head from TOS FB25-V milling machine -Recording output: SK50 -Recording: Input gear -Milling head: fully swivelling -Stroke: 55 mm -Recess recording: mm -Bolt circle: mm -Transport dimensions: 780/490/H430 mm -Weight: 224 kg
spindle diameter: 100 mm x-travel: 1500 mm y-travel: 1250 mm z-travel: 1800 mm turning speeds: 7,1-1120 U/min table surface area: 1200x1200 mm w-axis: 800 mm Radial face slide: 600 mm radial face slide travel: 200 mm Tailstock: mm angular milling head: digital readout: Heidenhain total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forwar ...
x-travel: 850 mm y-travel: 500 mm z-travel: 500 mm taper: ISO 40 P.D.B. table-size: 400x1250 mm volt: 400 V Control: Heidenhain TNC 355 total power requirement: 7,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 720 mm y-travel: 360 mm z-travel: 420 mm taper: ISO 40 table-size: 1000x320 mm volt: 400 V total power requirement: 5,5 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: m Universal milling head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1100 mm y-travel: 500 mm z-travel: 600 mm taper: ISO 40 P.D.B. table-size: 500x1250 mm volt: 400 V Control: Heidenhain TNC 410MA total power requirement: 10 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle bore: 63 mm spindle diameter: . mm x-travel: 800 mm y-travel: 700 mm z-travel: 1300 mm w-axis: 600 mm b-axis: . ° spindle turning speed range: 18-1800(32x) U/min table surface area: 800x890 mm spindle taper ISO: 40 P.D.B. total power requirement: 11,4 kW weight of the machine ca.: . t dimensions of the machine ca.: . m Facing Head Tailstock The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Yo ...
Vertical turning machine manufactured in 2002. This TOS SK 16 features a maximum workpiece diameter of 1700 mm and a turning height of 1380 mm. It has a turntable clamping diameter of 1620 mm and can handle a maximum table load of 5000 kg. If you are looking to get high-quality turning capabilities, consider the TOS SK 16 machine we have for sale. Contact us for further details.
Double-column planing machine Type: HD 16/4000 Manufacturer: TOS Year: 1962 Max planing width: 1600 mm Max planing length: 4000 mm Machine fully functional Find more here - / Contact us at -
