Center distance 5,000mm Height of the tips 600mm 105mm bar passage carriage equipped with grinding Machine in very good condition
• Height of centers 750 mm • Distance between centers 5000 mm • Diameter on the bench 1500 mm • Diameter on the carriage 1050 mm • Main engine power 75 Hp • Baruffaldi BA 300 4-position automatic turret • CNC ECS 2400 • Hydraulic chuck • Max. permissible weight between the tips without steady rests kg. 15000 • Max. permissible weight on the platform, cantilevered, with centre of gravity at 300 mm: kg. 3800
Specifications: height of tips on the bench 700mm Height of tips on carriage 520mm Distance between closed bench centers 4,000mm Distance between drills with extended bench 6,000mm Extended Bench Drill Height 1,100mm mobile bed stroke 2,000mm 150mm bar passage various accessories available (plateau, chuck, steady rests, tailstocks,...) Supplied machine books 2-axis dimension display MACHINE IN EXCELLENT CONDITION
Center height 1,500 mm Permissible diameter on the bed 2,400 mm Permissible diameter above 2,200 mm Cross slide Peak width 10,000 mm Permissible workpiece weight 60,000 kg Between tips without lunettes Power main motor 100 kW Total installed power 145 kW Speed range 1-300 rpm Gear stages 3 Max Torque 110,000 Nm Spindle bore 160 mm Accessories: Conveyor Roller buck Two fixed bezels
turning diameter over bed: 660 mm turning diameter over slide rest: 450 mm turning length: 2000- 2880 mm throat: Ø 1200 x 880 mm Height of centres: 330 mm spindle passage: 85 mm turning speed range: 10- 700 U/min tail stock: MK 5 transmission ratio: 24 tool holder: Multifix C dimensions: 3,5/4,4 x 1,45 x 1,1 m weight of the machine ca.: 4,2 t konv. lathe with movable bed for long gap. - movable bed 880 mm - swing Ø in gap: Ø 1400 mm - 3- jaw chuck Ø 315 mm - facing plate Ø 800 mm - facing plate Ø 500 mm - rapid travers - some tool holders The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 1450 mm turning diameter over slide rest: 950 mm turning length: 4000 mm centre height: 725 mm faceplate diameter: 1000 mm travel -x axis: 980 mm travel -z axis: 4000 mm workpiece weight: 2 to turning speed range: 1,5 - 1000 U/min spindle hollow: 500 mm Control: Siemens 828D total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m - CNC Control Siemens 828D - Front and Rear 1000mm dia. 4 – chucks - Tailstock - Chip Conveyor - Boring Bar 1500 mm x 120 mm - Boring Bar 1690 mm x 120 mm - Boring Bar 1000 mm x 80 mm - Boring Bar 1500 mm x 100 mm - Quantity of KM Tooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 2150 mm turning diameter over slide rest: 1800 mm turning length: 10000 mm speed: 1 - 300 U/min faceplate diameter: 1800 mm spindle bore: 200 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m - 4-jaw face plate Ø 1800 mm - 2 Steady rest Ø 100 to 560 mm and Ø 1.3 to 1.8 m - 4-way toolpost - tailstock The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- Motorized tailstock - CE-Chuck cover protection - Telescopic guide cover over guideways - Steady rest - 4 chuck 1000 mm diameter - 3 chuck 500 mm diameter - - 2 Axis digital read out system
Tacchi HD3/140L CNC Schwerdrehmaschine mit Fräsfunktion. Jahr 2001. Gebaut für große Durchmesser, lange Wellen und anspruchsvolle Schruppbearbeitung mit zuverlässiger Präzision. Mit 95 kW Spindelleistung, einem Schwingdurchmesser über Bett von 2.000 mm und 8.000 mm zwischen den Spitzen bietet die Tacchi HD3/140L Kapazität und Steifigkeit für den kontinuierlichen industriellen Einsatz.Diese gebrauchte HD3/140L bietet die Kraft und Stabilität, die Sie für starke Schnitte, überzeugende Oberflächenqualität und weniger Rüstzeiten benötigen. Die 3-Bett-Konstruktion und die 1.400 mm Bettbreite erhöhen die Steifigkeit. Die volle C-Achse mit 360.000 Positionen und ein 22 kW Fräskopf ermöglichen vollständige Bearbeitung in einer Spannung, wodurch die Taktzeit und Handhabung reduziert werden. Käufer, die nach einer gebrauchten HD3/140L suchen, profitieren von der bewährten Zuve ...
turning diameter over bed: 1800 mm turning diameter over slide rest: 1200 mm turning length: 16000 mm turning dia. in gap: 2300 mm spindle diameter: 150 mm speed: 1 - 300 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 800 mm turning length: 1500 mm swing diameter over bed slide: 250 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Next image can not be found: d833 tacchi mt400 (2) Brand: Tacchi Type: MT400 Distance between centers: 1.500 mm Centre height: 400 mm Swing over bed: 800 mm ø Swing over support: 250 mm ø Swing in the gap: 550 mm ø Spindle boring: 130 mm ø 3-Jaw chuck: 390 mm ø Digital read-out Rapid traverse on longitudinal and cross travelling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 1800 mm turning diameter over slide rest: 1200 mm turning length: 16000 mm turning dia. in gap: 2300 mm spindle diameter: 150 mm speed: 1 - 300 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
