Key data: 300 mm, 150 mm, 250 mm
Hello, We hereby offer you a used universal/vertical milling machine, type SH 4 D, from the manufacturer Steinel. Manufacturer: Steinel Model SH 4 D with vertical milling head FRP 3 Machine No. 8160 Travels X-Y-Z axis X = 300mm, Y = 150 mm. Z = 250mm. Table dimensions 740 x 200 mm Clamping surface 620 × 130 mm Spindle speed 32 – 1250 rpm Feed stages 0.2 / 0.32 / 0.5 / 0.63 / 1 / 1.6 mm/min Quill stroke / drilling spindle stroke 100 mm Power main motor 1.5 kW Weight approx. 800 kg Dimensions approx. 1,100 × 1,300 × 1,600 mm Conventional control Note: The aforementioned technical data have been taken from the operating instructions, brochures of the manufacturer or other sources, for which we cannot assume any liability for the correctness and completeness. Scope of delivery: 1 piece used Universal/Vertical Milling Machine, Steinel, Type SH 4 D Area of ap ...
Weighing fraes machine STEINEL SH5, table 700 / 200 mm, table lashing adjustment pneumatic
Stand drilling machine in row arrangement, used Gang drilling machine, used Type: BT 6.52 Manufacturer / make: Steinel Built/ new in: 1978 Drilling capacity / drilling capacity: 6 mm in St 60 Spindle cone/ spindle taper: MK 1 Drilling spindle discharge / distance center drill spindle to column: 204 mm Drilling stroke/ way of spindle: 90 mm Table clamping area/ table size: 800 x 390 mm Column diameter/ diam. of coulmn: 60 mm Drilling spindle speeds / speeds of drilling spindle: 1400 / 2800 / 5600 per min/ per minute Total connection value / rated power: 0.25 kW each => 1 kW Weight / weight: approx. 0.4 t
Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine, vertical milling machine -Manufacturer: Steinel, vertical milling machine type SV 4 -Clamping table: 740 x 200 mm -Cross table: 620 x 130 mm -Travel: X/Y/Z 340/100/300 mm -Spindle holder: MK2 -Speed: 112 - 2240 rpm right/left rotation -Feed: 0.10 - 0.71 mm/min -Quill stroke: 100 mm -Coolant system -Dimensions: 1000/950/H1830 mm -Weight: 650 kg
bore capacity in steel (diameter): 6 mm total power requirement: 1 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Horizontal machining centre with 2-fold change table STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 MFabr. No. 34 Year of construction 1988Travel range X: 500 mm, Y: 400 mm, Z: 320 mmClamping surface, table surface 500 x 400 mmTool holder ISO 40Spindle speed max. 6300 rpm. infinitely variableMain spindle drive 12 kWNet connection 380 Volt, 50 Hz, 30 kVA- Tool changer with 24 tool positions- Changing table with 2 stations- Interface for data transfer- Coolant device with chip conveyorSpace requirement L x W x
Two Steinel BZ20 milling machines are available. Travel X/Y/Z: 560mm/450mm/450mm, speed: 7000rpm, feed: 10000mm/min, tool holder: ISO30, tool positions: 40, rotary table diameter: 270mm, rotary table swivel range: 0°-24°, max. workpiece weight: 6kg. Control: Siemens System 8, weight: approx. 12000kg. Spare parts carrier.
bore capacity in steel (diameter): 6 mm throat: 204 mm bore stroke: 90 mm distance table - lower edge spindle: -265 mm Column diameter: 60 mm spindle turning speed range: 700 - 5600 U/min total power requirement: 0,43 kW weight of the machine ca.: 73 Kg dimensions of the machine ca.: TBH 0,63 x 0,37 x 0,72 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 560 mm y-travel: 450 mm z-travel: 450 mm rotary table dia.: 270 mm rotary table tiltable: 0 - 24 ° spindle taper ISO: 30 spindle turning speed range: 31,5 - 7100 U/min feed speeds: 1 - 10.000 mm/min control: SINUMERIK System 8 no. of tools in magazin: 40 wotkpiece diameter with 2 vacant positions: 100 mm workpiece length: 255 mm weight of tools max.: 6 kg total power requirement: 32 kW weight of the machine ca.: 11,6 t dimensions of the machine ca.: m = 5 axis machining centre Accessories: various tool fixtures, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
