Model
(Manufacturer: STAHL)
Size max 360 x 650 mm min 80 x 100 mm Speed max 150 m/min Equipment o flat pile feeder 1st folding unit: o 4 buckle plates o Festa foldingrolleradjustment o noise prevention ; working condition
Electric chain hoist steel R 6 Year of construction 1977 Pulling power 300 kg Weight approx. 70 kg L x W x H: 30 x 30 x 50 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
1 very well preserved double girder crane ideally suited to the transport and use of long goods crane driving towards Load approx. 4 x 4,000 = 16,000 kg track width approx. 20.565 mm Hook path about 6.500 mm Make steel Year of construction/renovation 1990/1993 Workshop overhaul 2016 FEM 3 m Crane equipped with high-quality wind factory units, synchronous and separately controllable to apply loads, radio control Working speeds: Hoist CA. 1,2/12.0 m / min Trolley gear approx. 5.0/20,0 m / min crane chassis approx. 10.0/40.0 m / min
1 factory-tested, well preserved steel double girder overhead travelling crane Load approx. 16,000 kg Track width approx. 13,500 mm hook path approximately 3,600 mm Katz gauge approximately 4,200 mm Year of production / workshop test 1990/2016 Crane equipped with double girder trolley and steel drive units suitable for traverse operation, radio control, catwalk and overload protection Working speeds: Hoist CA. 0.6/4.0 m / min Katz LG 4.0/16.0 m / min Crane chassis 4.0/16.0 m / min
1 factory-tested, absolutely Mint double girder crane as crane trolley with 2 elevators, particularly suitable for traverse operation Load approx. 2 x 6,300 = 12,600 kg Span 14,950 mm hook path about 6,000 mm Make steel Year of production/workshop inspection 2002/2016 Crane equipped with Swivel trolley, maintenance stage, split head support for optimal wheel load distribution, radio control working speeds: Hoist CA. 0.6/4.0 m / min Trolley gear about 2.5/10.0 m / min Crane chassis up to approx. 40.0 m / min
1 factory-tested double girder overhead travelling crane Load approx. 6,300 kg Wingspan approx. 14,000 mm Hook path Max 10.000 mm Make steel Workshop examination 2016 Crane equipped with steel double girder trolley, corridor control working speeds: Hoist approx. 0.8/10.0 m / min Trolley gear approx. 14.0 m / min Crane chassis 10.0/40.0 m / min
1 factory-tested single angle crane in design with laterally movable carrier trolley Load approx. 5,000 kg Span approximately 33,000 mm Hook way max. 9000 mm Make AUMUND/steel Year of production/workshop test 1981/2016 with steel angle trolley for maximum hook path, DEMAG Kranfahran- drove, corridor control freely movable Working speeds: Hoist approx. 1.3/8.0 m / min Trolley gear 10.0/40.0 m / min Crane chassis up to 60.0 m / min
1 factory-tested, very well preserved single girder crane angle load approx. 5,000 kg Wingspan approx. 10,000 mm Hook path about 7,500 mm Make steel Workshop examination 2016 Floor control equipped with angle trolley for optimal hook path, freely movable working speeds: Hoist approx. 0.8/5.0 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 4.0/16.0 m / min
1 factory-tested single girder overhead travelling crane lifting capacity 5000 kg Span around 10,000 mm Hook way max. 5.000 mm Make steel Year of production/workshop test 1983/2016 Crane equipped with steel monorail trolley, freely movable floor control Working speeds: Hoist 0.5/3.4 m / min Trolley gear 16.0 m / min Crane chassis 4.0/16.0 m / min
1 factory-tested, very well-preserved single-girder crane with angle trolley load approx. 4,000 kg Load trolley CA 5,000 kg Wingspan approx. 7.100 mm Make steel Year of production / workshop testing 1986/2016 Crane radio control equipped with angle trolley for a perfect hook road, Working speeds: Hoist 0.5/3.25 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 10.0/40.0 m / min
Bridge crane for Ausseneinsatz Fabrikat steel - built 2007 Traglast 60 t - 16 m track width - height 8 m with enhances crane runway - completely screwed approx. 66 m long
feeder: • pallet feeder • machine number (feeder) 34103/88 • counter EVZ 30 1st folding unit: • pre-slitter shafts • 4 buckle plates • rear-mounted slitter shafts • noise prevention 2nd folding unit: • working width max. 94cm • 4 buckle plates • rear-mounted slitter shafts • noise prevention 3rd folding unit • working width max. 66cm • 2 buckle plates • rear-mounted slitter shafts • noise prevention Still in operation: No Available: sofort
Depth gauge, caliper, vernier caliper, vernier caliper -Measuring range: 0-300 mm -Fine-tuning -long measuring jaws -Number: 4x depth gauges available -Price: per piece -Weight: 0.6 kg
Assembly star, assembly table, workbench, welding table, clamping plate, gluing press, gluing star, glue press, gluing stand, rotating device, container rotating device, welding rotating device -Cube size: 750 x 750 mm -Working width: 750 x 4000 mm -Geared motor: 0.18 kW -pneumatic disc brake -Foot switch -Dimensions: 5250/1100/H2750 mm -Weight: approx. 800 kg
Tapping chucks, thread chucks, tapping chucks -with slip clutch -Cutting capacity: max. M16 -Recording: MK3 -Weight: 3.2 kg
Clamping plate, welding table, welding table, straightening plate -Width: 750 mm -Length: 1000 mm -Height: 850 mm -Surface: milled -partly with threaded holes -Drawer -Plate thickness: 30 mm -with supporting ribs -Weight: 256 kg
Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outside: Ø 3x201/1x190 mm -Cone: 82 mm -Hole circle: Ø 105 mm -Number: 2x discs still available -Price: complete -Weight: 11 kg
Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 9 mm -Length: approx. 26 m -for electric cable winch -other crane ropes are also available -Weight: 9 kg
Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets Sizes: various -Sale: only as a package -Weight: 0.8 kg
Electric chain hoist, crane, indoor crane, assembly crane, hand trolley, roller trolley, crane trolley, trolley drive, crane drive, crane undercarriage, trolley -Manufacturer: Stahl, electric chain hoist with powered chassis -Equipment: without pendant control, without own control -Crane chassis: Type SU-A 1442 110 electrically driven -Beam width 130 to max. 165 mm -Chain hoist: Type ST 2008-16/4 2/1 -Load capacity: 1500 kg -Main stroke: 8 m/min -Fine stroke: 2 m/min -Chain length: 4.5 m -Dimensions: see photo technical drawing -Transport dimensions: 1350/1030/H1000 mm -Weight: 136 kg
Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 12 mm -Length: approx. 25 m -for electric cable winch -other crane ropes are also available -Weight: 17 kg
Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 100 mm -Dimensions: see photo techn. drawing -Dimensions: 250/120/H63 mm -Weight: 10 kg
Change gear, change gears, gear -Number of teeth: 152 pieces -Module: 1.25 mm -for splined shaft: Ø 25 mm
Hatches, cargo hold hatches, cover plate, manhole cover -Cover plate: manhole cover with support ribs -Material: sheet steel thickness 10 mm -External dimensions: 750/750/H70 mm -Inner dimensions: 600 x 600 mm -Weight 51 kg/piece
Change gear, change gears, gear -Number of teeth: 141 pieces -Module: 1.25 mm -for splined shaft: Ø 25 mm
Steel beam, HEB steel beam, double T-beam, IPB steel beam, steel column -Steel beam: HEB 140 mm with head and base plate -Condition: according to pictures -Total length: 4280 mm -Width: 140 mm -Height: 140 mm -Flange thickness: 12 mm -Bridge thickness: 7 mm -Base plate: 300 x 300 x 25 mm -Head plate: 200 x 250 x 20 mm -Number: 53 pieces steel beams available -Price: per piece -Weight: 171 kg/piece
Forklift tipping container, tipping container, tipping skip, forklift skip, waste tipping container, scrap tipping container -Condition: NEW -Contents: 0.8 m³ -Steel sheet: 3 mm -Mounting: for forklift tines -Max. tine width: 150 mm -with tilting mechanism -Storage: stackable -Corrosion protection: Powder-coated -Dimensions: 1750/750/H870 mm -Quantity: 6 pieces available -Price: per piece -Weight: 180 kg
Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 12 mm -Length: approx. 36 m -for electric cable winch -other crane ropes are also available -Weight: 18 kg
End mill, shank mill, milling cutter -Two-knife -Finish cutter -Diameter: 14 mm -Usable length: 30 mm -Corner radius: 0.7 mm -Carbide: equipped -Quantity: 88 pieces Price: per piece -Weight: 8 kg
