SSP sr used machines

A complete brewhouse SSP Lichtenvoorde, purchased from the Paul Mueller Company, is available. Components: mash tun, lauter tun, whirlpool, working platform, CIP system, spent grain container, and wort pump. Brew length: 40hl, min. brew length: 25hl, min. part mash: 12hl, spent grain container volume: 2.5m³, brews: 2, pumps: 4, wort cooling pump type: E-Hygia-Bloctronic I/25b, CIP system tanks: 2, heat exchanger: Pfaduko VT20 LOC.IN, capacity: 26l, max. temperature: 100°C. The system is equipped with a brewhouse automation including Siemens OP37 and PROSYT control, but this is defective. If desired, the brewhouse can be purchased at an additional cost with newly installed control, automation accessories, and general overhaul. Documentation available. An on-site inspection is possible.

Double-tubing stainless steel tanks very stable quality. Suitable for cooling with a net content of 2500 l

Stainless Steel Vertical Cylindrical Tank 2000L. Single skin with side entry manway and top inspection port. Lifting eyes Sight level gauge. Sample Tap Racking point with valve. Bottom outlet with DIN40 butterfly valve. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

We have more than 1000 used Alfa Laval SRC valves in different sizes in stock. Also actuators with heavy duty springs, two-step actuators, components like RC or BC housings (reverse closing, brewery CIP) and many more special items. We also sell valve parts, please ask. The valves can be customized with new seals of your choice and delivered ready to install. Valve tops like Thinktop , basic top ,Sattop , LKT-S , LKT-N and proximity switches also available, both new and used. Editec AB

Alpine dairymen curve machine, uses type SR28SL construction year 1994

UNIROLL from DORST Type: SRHV 1 Year of manufacture: 1990 Generally overhould in: 2017 Machine is in very good condition! Including Vacuumpump!

Kat. No. 12-1170 in a very good condition Measurements and weight: LxBxH: 140 x 64 x 117 cm weight: 160 kg type: SRZ4 / 055LD Serial No. 279503 4,4 kW DN 65 130 l/min., 7800 l/h 7,5 bar For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

1 Qty. 1 Second-hand 3 roll bending machine Mfc.: SW GmbH Type: SRMV G Built: 1989 Strip width max.: 2000 mm Wall thickness: max. 25 mm / Ø 530 mm 2 Qty. 1 Second-hand 3 roll bending machine Mfc.: SW GmbH Type: SRMV Hy Built: 1981 Strip width: max. 3500 mm Wall thickness: max. 12 mm 3 Qty. Second-hand 3 roll bending machine Mfc.: SW GmbH Type: SRMV Hy Built: 1983 Strip width: max. 3500 mm Wall thickness: max. 19 mm 4 Qty. 1 Second-hand 4 roll bending machine Mfc.: SW GmbH Type: SVRM Built: 1981 Strip width: max. 2000 mm Wall thickness: max. 16 mm

Energy chain including covers, closed, can be opened. Black dimensions 75 x 55. Unused mint condition! 10 mtr. present a ´ mtr. 29.-NET Very high quality see photos! 0170 / 2204056 Info Mail fa.raupp@t-online

Manufacturer: Hassia Type: Redatron The packaging machine is designed a vertical hose bag packaging machine for continuous operation. 60 packages per minute Size of packaging: maximum length: 400 mm maximum width 200mm optionally with euro hole tear-open thread 3 x 380 V 220 V 50 Hz

Product number:M15-4194 Cooling capacity:41,6 kW Number of fans:1 Refrigerant:R407C Refrigerant Content:10 kg Voltage:400 Volt Power consumption:16,5 kW Dimensions:2085 x 1230 x 2300 mm Weight:1013 kg Year:2012 Number in stock:2 piece(s) Very young and good LIEBERT air-cooled water chiller with free cooling capability (28,6 kW). Mentioned capacities are at an ambient temperature of 35°C and at 15/10°C (inlet/outlet) with ethylene glycol 30%. These chillers are equipped with an expansion tank and a water pump. Please visit also our website: used-refrigeration

X-ray tube assembly type SRM 2250 red abzugen GS-500.

Dear customers currently we offer you a used tape saw of the brand HEMA. Here are the technical data of the machine: Table: 540 x 600 mm Cutting width: 480 mm Super cutting height: 385 mm Roll diameter: 500 mm Saw blade length: 4,080 mm Power: 2.2 kW Speed: 2,800 rpm with engine brake Dimensions: 810 x 945 x 1,970 mm Weight: approx. 210 Kg Price plus VAT, which will be shown separately on the invoice. Shipping possible for an extra charge! If you have any questions, please do not hesitate to contact us.

Built in 1997 Size max 660 x 1.020 mm Equipment feeder: o continuous feeder o counter 1st folding unit: o 4 buckle plates o polyurethane-steel folding rollers o noise prevention 2nd folding unit: o cross-fold knife o buckle after cross-fold left o polyurethane-steel folding rollers 3rd folding unit: o third-fold knife o polyurethane-steel folding rollers delivery: o belt delivery ; working condition

Built in 1998 Size max 740 x 1.110 mm Equipment: feeder: o continuous feeder o counter 1st folding unit: o 4 buckle plates o polyurethane-steel folding rollers o noise prevention 2nd folding unit: o cross-fold knife o buckle after cross-fold left o polyurethane-steel folding rollers 3rd folding unit: o third-fold knife delivery: o belt delivery; working condition

Working width: 3000 mm sheet thickness: 15 mm sheet thickness in bending: 10 mm top rollers Ã?: 320 mm bottom rollers diameter: 310 mm speed: approx. 5.5 m / min. Connection: 380V kW weight: 17000 kg space requirement: 5450 x 2100 x 2450 mm

Small shredder for various tasks such as old cables, plastics wood, etc. With hydraulic, electronically controlled feed. Drive 18.5 + 2.2 kW (rotor + feed). Rotor shaft with connectors for connecting a cooling device (e.g. when used for NYM old cables. The machine is 1 year old and little used from our demo machine inventory. The machine is offered with a one-year used machine warranty.

The IRS 120 Easy is the perfect entry point into cable recycling. The special combination of large flywheels and multi-part segment cutting knives makes it possible to efficiently recycle old cables made of copper or aluminium even without high power consumption and without shredding. The machine impresses with its small footprint, is easy to maintain and easy to use. Compared to most of the competition's systems, the machine has two separate fans for separator air and dust removal. This eliminates the usual interactions between more or less clogged filters and the purity of the copper granules. In addition, the separator air is not roughly adjusted via throttle valves, but by sensitive adjustment of the fan speed. This gives you the best qualities in finished copper. This machine is an immediately available storage machine and has 4 screen inserts, electronic pre-equipment for ...

Type: Ruhle SR2 with Elevator Loading sections (L x W x H): 500x120x200 mm Cutting length: 1,0 – 30,0 mm Saw blades 1 set Capacity: up to 1800 kg/hour Electric power: 3.5 kW Machine dimension in cm: Width: 70 cm Lenght: 180 cm Height: 125 cm Delivery time: 10 working days after advanced payment

Small shredder for a wide range of tasks such as old cables, plastics wood, etc. With hydraulic, electronically controlled feed. Drive 18.5 + 2.2 kW (rotor + feed). The machine was overhauled by the manufacturer ISVE in September 2020 and supplemented with an electronics for networking into a cable recycling line. A rotor cover for the optimized processing of old cables has also been added. Currently, the shredder has a 16 mm hole sieve but other hole diameters can also be added. With the 16 mm hole sieve, the shredder reaches about 250 kg/hour when processing mixing cables.

Type: Ruhle SR2 Loading sections (L x W x H): 500x120x200 mm Cutting length: 1,0 – 30,0 mm Saw blades 1 set Capacity: up to 1800 kg/hour Electric power: 3.5 kW Machine dimension in cm: Width: 70 cm Lenght: 150 cm Height: 125 cm Delivery time: 10 working days after advanced payment

Screw compressor system semi-thermal air conditioning compressor Compressor Chiller 2 x 30 Kw electric for air conditioning systems. 2x Screw compressor Manufacturer: RefComp Type: SRC-S-133 Ser.-No.: RE00093364 & RE00093366 400 V; 277/398 A; 50 Hz; IP54 rated power Leistg.: 30 kW Funding volume: 150 m3/h Pressure: 19-26.5 bar 3x Shell and tube condensers Manufacturer: WTK Type: CF270 CA2P Y.O.M.: 2009 272 kW (46.80 m3/h); 273 mm Tube Side: 10-11 bar; -10/+120 °C; 26.0 dm3; H2O Shell Side: 30-33 bar; -10/+120 °C; 85.9 dm3; gas with control box / control box with main switches, control & switching modules & pcd7. D232 terminal display. with piping and other various extensions, all mounted on a sturdy 4-edge dread tube frame. Total approx. 3450 x 1400 H 1900 mm Subject to changes and errors in the technical data, dates and prices as well as intermediate s ...

table diameter: 960 mm table load: 3.500 kg Frontal Loading Center (A): 150 mm Side Loading Center (B): 150 mm Rotating speeds: 0,1 - 0,9 UpM T-slots: 6 x M20 Tilt Angle: 70-90-180 ° Tilting Speed: 30 sn min./90° weight of the machine ca.: 1.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1300 mm table load: 7.000 kg Frontal Loading Center (A): 150 mm Side Loading Center (B): 150 mm Rotating speeds: 0,1 - 0,9 UpM T-slots: 6 x M24 Tilt Angle: 90-180-100 ° Tilting Speed: 30 sn min./90° weight of the machine ca.: 3.050 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 715 mm table load: 500 kg Frontal Loading Center (A): 150 mm Side Loading Center (B): 150 mm Rotating speeds: 0,1 - 1 UpM T-slots: 6 x M16 Tilt Angle: 90-180-110 ° Tilting Speed: 30 sn min./90° weight of the machine ca.: 675 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.