We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Smeral Trnava, single-column eccentric press type LEN 25 C -Pressure capacity: 25 tons -Clutch: pneumatic -Stroke: adjustable 8 - 85 mm -Stroke rate: 80-160 strokes/min, see photo of type plate -Table size: 435 x 560 mm -Table recess: Ø 90/180 mm -Projection: 220 mm -Punching fixture: Ø 40 mm -Insertion height 230 mm -Dimensions: press 1220/1160/H2100 mm / control cabinet 680/355/H970 mm -Total weight: 2569 kg
Rated press force 400 kN Impact stroke 8-95 mm Stroke stroke number 70/142 /min Impact adjustment 60 mm Table area 660x530 mm Impact surface 400x250 mm Recording 3-4 kW Compressed air operating pressure 0.6 Mpa
used
pressure: 40 t throat: - mm stroke: 8 - 90 mm table size: 630 x 430 mm ram adjustment: 60 mm no. of strokes: max. 65 Hub/min total power requirement: kW weight of the machine ca.: 2480 kg dimensions of the machine ca.: m - tiltable - table mounting plate - mechan. Overload protection in plunger (break plate) - pneum. clutch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Nominal force 400 kN Stroke rate - 70/140 / min Motor 3/4 kW Exploitable stroke - at constant. Clutch brake temperature 50/45/min Capacity - material thickness 4-6.4 m - with single strokes, 2-3.2 mm - with continuous stroke Table 660 x 530 mm, table top 650 x 515 x 75 mm Stroke adjustment - 10-125 mm, Dimensions 1250 x 1600 x 2370 mm - High , Btto 4500 kg Reconditioned machine - warranty 9 months from delivery date
used
The press has been completely renovated. Scope of work: cleaning and repainting of the body and covers, regeneration of clutch wheel disc linings, new pneumatic installation, new electrical installation, new control (Fiessler FMSC controllers, Siemens control panel, foot limit switch), installation of feet, new user manual and documented modernization history. Original documentation available. Pressure: 25 tons Max. number of strokes/min: 125 Slider stroke: 8-60mm Slider adjustment range: 55mm Weight: 1400 kg
used
Type: Rolling machine UL 40 Parameters: Manufacturer: Šmeral Year of production / SO / GO: - / - / 2019 Location: Czech Republic Description: Semi-automatic machine for transverse hot wedge rolling UL 35 Šmeral redesigned to UL 40. Starting bar material: diameter 14-35mm, length 2500-4000mm. Diameter of rollers 600mm, width of rollers 400mm, max. Length of material feed 150mm.
used
Inv. Num. : 4164 Type: LKT 250 Producer: SMERAL Created: 1977 Parameters: Pressing force: 250 t Table: 1575 x 1150 mm plunger stroke: 250 mm Stroke: 20/min Plunger adjustment: 100 mm Installation height: 750 mm Shock dimensions: 1380 x 850 mm Motor power: 28 kW Dimensions 2800 x 1240 x 4450 mm Machine weight: 23400 kg
used
Inv. Num. : 6606 Type: LDC 250 Producer: SMERAL Created: 1980 Parameters: Compressive force: 250 t Maximum stroke rate upper table: 38 1/min Ram stroke: 200 mm Adjustment of the plunger: 120 mm
used
BRAND: SMERAL YEAR: 2019 MODEL: LKT 250D APPLICATION TYPE: STAMPING LOCATION: SLOVAKIA MACHINE TYPE: STAMPING MACHINE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MACHINE WEIGHT: 27000 KG CONTROL UNIT BRAND: MINI TABLE OUTER LENGTH: 1575 MM OUTER WIDTH: 1150 MM Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - MAIN MOTOR POWER 30 KW - STROKES PER MIN 20 - RAM SIZE 1380 X 850 MM - DAYLIGHT 1600 MM QUALITATIVE MACHINE BENEFITS: - FULLY RETROFITTED MACHINE IN 2019
used
This SMERAL LKT 250D Stamping machine was manufactured in the year 2019 in Czech Republic. It is equipped with a MINI control unit.
used
Crank press SMERAL LKT 250A
new
SMERAL LZK 2500 Hot Forging press Fully refurbished in 2024* Capacity: 2500 Ton Speed: 65 SPM, continuous mode Ram/Slide Stroke: 320.00mm Ram/Slide Adjustment: 10.00mm Shut Height (Ram/Slide Down, Adjustment Up): 905.00mm Stroke of Upper Knockout: 50.00mm Stroke of Lower Knockout: 70.00mm Ram/Slide Width: 1320.00 mm Ram/Slide Height: 1100.00 mm Bed Width: 1340.00 mm Bed Depth: 1400.00 mm Power: 130kW Machine Length: 4055.00 mm Machine Width: 4000.00 mm Machine Height: 6710.00 mm Weight: 140000 kg Condition: like new * refurbishing report: 1. Mechanical part • Complete disassembly of the press. • Measurement and troubleshooting of all parts. • The main parts of the press are tested (without destruction) in order to identify any defects. Frame: The frame was inspected and non-destructive testing of the most loaded areas was carried out. Damage to the table ...
used
-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 x 1600 mm -Bed movement by height – 20 mm -Max pressure of upper ejector – 20 t -Max stroke of upper ejector – 65 mm -Max pressure of lower ejector – 40t -Max stroke of lower ejector – 80 mm -Main motor power – 225 kW -Main motor speed – 730 rpm -Total width — 6280 mm -Total depth – 4885 mm -Total height – 8870 mm -Height over the bed – 7315 mm -Total net weight – 280 092 kg
used
pressure: 160 t throat: 400 mm stroke: 20 - 160 mm table surface area: 1200 x 800 mm ram adjustment: 100 mm no. of strokes: 60 Hub/min ram surface: 860 x 520 mm total power requirement: 15 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 1,7 x 2,5 x 3,23 m The machine should b partially overhauled *new painting *new seals The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Capacity: 1000 tons Stroke: 140 mm Table plate size: 910x920 mm Ram adjustment: 15 mm Main motor power: 28 kw Total power: 30 kW Dimensions (length x width x height): 2100x2500x4700 mm Height above floor: 3800 mm Total weight: 31000 kg
used
Pressure 800 tons Ram stroke 380 mm Strokes / min. 35 Forged bar diameter 100 mm Machine weight 81 tons Length 5500 mm Width 5600 mm Height 3060 mm Operating voltage electric motor 380 V Motor power 40 kW Working stroke of main slide 250 mm Return slide of main slide at 125 mm clamped matrix Stroke of clamped slide 150 mm
used
year 1985 Capacity 2500 / 2750 Ton 24900 / 27400 kN Speed 65 SPM, continuous mode Ram/Slide Stroke 12.60in, 320.00mm Ram/Slide Adjustment 0.39in, 10.00mm Shut Height (Ram / Slide Down, Adjustment Up) 35.60in, 905.00mm Stroke of Upper Knockout 2.00in, 50.00mm Stroke of Lower Knockout 2.80in, 70.00mm Ram/Slide Width 52.00 in, 1320.00 mm Ram/Slide Height 43.00 in, 1100.00 mm Bed Width 53.00 in, 1340.00 mm Bed Depth 55.00 in, 1400.00 mm power Existing Additional 28 Strokes per minute in manual mode, height shown is above floor, total height is 291 in ( 7390 mm), new quick change hydraulic type bolster Machine Length 160.00 in, 4055.00 mm Machine Width 157.00 in, 4000.00 mm machine height 264.00 in, 6710.00 mm Weight 320000 lbs, 145455 kg Condition Excellent Currently disassembled an ...
used
-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 x 1600 mm -Bed movement by height – 20 mm -Max pressure of upper ejector – 20 t -Max stroke of upper ejector – 65 mm -Max pressure of lower ejector – 40t -Max stroke of lower ejector – 80 mm -Main motor power – 225 kW -Main motor speed – 730 rpm -Total width — 6280 mm -Total depth – 4885 mm -Total height – 8870 mm -Height over the bed – 7315 mm -Total net weight – 280 092 kg
used
Capacity: 1 200 T, Total stroke: 500 mm, Stroke of main crank shaft: 318 mm, Stroke of mobile die: 215 mm, Stroke/min: 27, Bar diameter: 50-90 (150) mm, Max diameter of peace: 152mm, Max weight of piece: 5 kg, Main motor power: 75 KW, Area of machine : 6400 x 4420 mm, Hight of machine: 3830 mm, Weight: 128.0 T
used
The machine is in good technical condition. Max. sheet length: 2050 mm Max. sheet thickness: 4 mm By prior arrangement, the possibility of a tour in progress.
used
The machine is in good technical condition. Max. length of bent material: 2050mm Max. strength of bent material: 4mm 7.5 - 2.2KW Weight: 4050kg By prior arrangement, the possibility of a tour in progress.
used
Description: Type: Mechanical  ,Force: 200 tn Travel : 50 mm  ,Table dimensions: 800x800 mm ,  ,Distance between plates: 400 mm ,  ,Strokes: 60 m/min  , weight approx.: 9,100 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 1,550 x 3,450 mm
used
Ex-lights for painting rooms: used 45-degree luminaires, recessed wall lamps, room lamps. with 2 or 3 or 4 x 58 W fluorescent tubes, for installation in painting systems. Please ask.
used
Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1000 LEA 1002 2.028.01.057.02 -Dimensions: 265/125/H100 mm -Weight: 2.0 kg
used
Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1000 LEA 1002 -Dimensions: 265/125/H100 mm -Weight: 2.0 kg