SIDEROS roto used machines

weight max. in kg: 1250 kg Working height minimal: 540 mm Working height maximum: 1120 mm table diameter: 800 mm swivelling range: --> 95 Grad max. torque: 490 Nm table rotation speed: 2 U/min Working height from to: 540 - 1120 vertikal mm Working height from to: 700 - 1280 horiz. mm total power requirement: 2,53 kW weight of the machine ca.: 757 kg dimensions of the machine ca.: 1,76 x 1,63 m Hydraulic positioner for permanent turning right + left, tilting, Raise and lower. Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 800 mm table load: 2 t swivelling range: --> 95 Grad max. torque: 1250 Nm table rotation speed: 2 U/min Working height from to: 550 - 1300 vertikal mm Working height from to: 650 - 1400 horiz. mm total power requirement: 2,53 kW weight of the machine ca.: 930 kg dimensions of the machine ca.: 1,85 x 1,66 m Electric 400 Volt: Hand control panel: Hydraulic-device: Hydraulic positioner for permanent turning right + left, tilting, Raise and lower. Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

filling capacity: 300 kg max. workpiece height: 500 x 200 x 20 mm container volume: 158 l workpiece weight: 175 kg max. workpiece weight: 15 kg / Stck. revolutions per minute: 22 U/min filling amount: 40-50 % Colour: blau 5015 RAL 0: 624 x 270 mm total power requirement: 1,5 kW weight of the machine ca.: 650 kg Video available on our website.: Electric 400 Volt: New deburring machine for safe and to efficiently deburr workpieces. 6 - angular drum lined with wear-resistant vulcanized rubber 36 mm, roller shutter to protect against the rotating container, stable design, simple service. Control panel with timer, hour counter, main and emergency stop switch and signal lamp. The maximum filling quantity is 40% of the containervolume and corresponds to 300 kg consisting of 175 kg workpieces + 125 kg deburring medium = Hard manganese balls pic 6 or cast iron pentagons pic 7 (50 kg is included ...

filling capacity: 750 kg max. workpiece height: 900 x 300 mm workpiece weight: total 550 kg max. workpiece weight: 30 kg / Stck. revolutions per minute: 22 U/min filling amount: 50-60 % Colour: blau 5015 RAL 0: 1175 x 440 mm total power requirement: 3 kW weight of the machine ca.: 1995 kg dimensions of the machine ca.: 2,9 x 1,33 x 1,75 m Video available on our website.: Electric 400 Volt: New deburring machine for safe and to efficiently deburr workpieces. Suitable for heavy applications. The EVO model is available for light to medium workpieces. 6 - square drum lined with durable, vulcanized rubber thickness 36 mm, locking cover with gas pressure springs, roller shutters to protect againstthe rotating Container, stable design, easy operation. Control by timer on control surface, main and emergency stop switch. The maximum fillingquantity is 40% of the container volume and corresponds ...

filling capacity: 300 kg max. workpiece height: 500 x 200 x 20 mm workpiece weight: 200 kg max. workpiece weight: 15 kg / Stck. revolutions per minute: 22 U/min filling amount: 40-50 % Colour: blau 5015 RAL 0: 625 x 270 mm total power requirement: 1,5 kW weight of the machine ca.: 650 kg range L-W-H: 1 x 1,7 x 1,29 mm Video available on our website.: Electric 400 Volt: New deburring machine for safe and to efficiently deburr workpieces. 6 - angular drum lined with wear-resistant vulcanized rubber 36 mm, roller shutter to protect against the rotating container, stable design, simple service. Control panel with timer, hour counter, main and emergency stop switch and signal lamp. The maximum filling quantity is 40% of the containervolume and corresponds to 300 kg consisting of 175 kg workpieces + 125 kg deburring medium = Hard manganese balls pic 6 or cast iron pentagons pic 7 (50 kg is i ...

filling capacity: 750 kg max. workpiece height: 900 x 300 mm workpiece weight: total 550 kg max. workpiece weight: 30 kg/Stck. revolutions per minute: 22 U/min filling amount: 50-60 % Colour: blau 5015 RAL 0: 1775 x 440 mm total power requirement: 3 kW weight of the machine ca.: 1995 kg dimensions of the machine ca.: 2,9 x 1,33 x 1,75 m Video available on our website.: Electric 400 Volt: New deburring machine for safe and to efficiently deburr workpieces. Suitable for heavy applications. The EVO model is available for light to medium workpieces. 6 - square drum lined with durable, vulcanized rubber thickness 36 mm, locking cover with gas pressure springs, roller shutters to protect againstthe rotating Container, stable design, easy operation. Control by timer on control surface, main and emergency stop switch. The maximum fillingquantity is 40% of the container volume and corresponds t ...

weight max. in kg: 2500 kg Working height minimal: 350 mm Working height maximum: 1850 mm max. torque: 3000 Nm 0: 1 U/min adjustment speed: vertikal 560 mm/min vertical adjustment: 1500 mm baseplate diameter: 600 mm rotation movement: 0,75 kW stroke drive: 1,85 kW height of the plant: 2505 mm weight: 1160 kg Video available on our website.: Sideros Engineering Head & Tailstock Positioners are used to weld and assembly long and large weldments in many different application fields. Besides the benefits of ergonomics and safety during welding and assembly applications, the revolutionary feature of Syncrolift is the compactness and the portability of both columns, thanks to their dedicated hydraulic jacks. The result is an extreme flexibility in the factory. Syncrolift features two main axis: Electrical elevation/descent, and Electrical 360° left/right rotation. Due to its special design,  ...

SIDEROS Model ECO 6 HC Year of construction 2006 7.5 KW

; New Diameter: 635mm Height: 590mm

Description Vetter Rotomax Turning Crane 80 to Details Type Rotomax Vetter Rotomax Load Turning Crane 80 to Machine no. 003074/1 Year of construction 2000 Load capacity 80,000 kg Net weight: 12,200 kg Wheel distance 1,600 - 6,000 mm Angle of inclination of the turning devices ß = 20 Max. torque 95,000 Nm Rotation speed 1.9 m/min Voltage UB 400 V 3 AC Control voltage Ust 24 V 1 AC incl. new slings and used slings incl. radio remote control

DREHER GRANULATOR, Mod. S26 - 41 GF, 410 mm rotor width, 260 mm rotor Ø, 11 kw drive (or lower), control panel, Average throughput rate 250 kg/h, Machine offered totally reconditioned, Suitable to reuse self-produced plastic scraps, installed power - used power in work: about 60-65% : 11 kW, availability: 3 weeks, working width: 410 mm, options available: lower power, capacity: 250 kg/h, conditions: reconditioned with sworn appraisal

6-colour format: 720 mm<br>TYP: 500, 6 INTAGLIO + 1 FLEXO, PAPIER & FOLIEN 50-150 GSM, ROLLS of 800 MM WIDTH: 750 MM;<br><br>Still in operation: Yes<br>Verf Gbar: immediately

6-colour format: 900 MM<br>ROTOPAK 1/S, 50-200 G, WEB WIDE: 820 MM, ROLLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6-colour format: 900 MM<br>ROTOPAK 1/S, 50-200 G, WEB WIDE: 820 MM, ROLLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Weight 1750 kg Length x Width x Height 1800 mm x 1350 mm x 3000 mm Machine data: rotor diameter - knife circle : 500 mm length rotor : 630 mm angular speed rotor : appr. 650 min-1 after-run duration : appr. 60 sec. motor power - depent of order: 37 kW / 1500 min-1 45 kW / 1500 min-1 idle power :appr. 30 - 40 % of nominal power. Very good condition, ready to work. You can also get the entire system with all components.

6-color size 900 MM ROTOPAK 1/S, 50 - 200 GSM, WEB WIDTH: 820 MM, ROLL DIA. 800 MM, Still in operation: Yes Available: IMMEDIATELY

6-color size 900 MM ROTOPAK 1/S, 50 - 200 GSM, WEB WIDTH: 820 MM, ROLL DIA. 800 MM, Still in operation: Yes Available: IMMEDIATELY

6-color size 720 mm TYPE: 500, 6 INTAGLIO + 1 FLEXO, PAPER & FOILS 50 - 150 GSM, ROLL DIA. 800 MM WIDTH: 750 MM; Still in operation: Yes Available: IMMEDIATLY

Vakuumdissolver Molteni type Roto plan DDHN 8/12 RP s.v. Planetary gear with a wall scraper good working condition Mixing bowl stainless steel 650 l Ex proof version 55 KW / 380 V, 50 Hz Speed range 0-1320 1/min

6-color R21454/14 ROTOMEC gravure machine model: Rotopak 1/S web width: max. 820 mm age: overhauled 1984 6 gravure printing units material: 50g/m² - 200 g/m² (paper /PE/ALU/PE) real diameter: max. 800 mm bale width: max. 900 mm gravure printing cylinder: circumference 440 – 800 mm Still in operation: Yes Available: sofort

Offer via gebr. Suhner Shaft Grinding Machine Rotovar DKM 7 Flexible Shaft Machine Shaft Grinding Machine Grinding Rotovar DKM7 Range: Wave A, 1000-12000 rpm. Wave B, 4600-40000 rpm. (400 V, 50 Hz, 3 Ph, 3.2 kW) incl. accessories 1 belt grinding head 1 brush grinding head Continuous - Separation of motor and tool guaranteed fatigue-free working Applications - Grinding - Disconnect - Roughing - Milling - De-rusting - Polishing - Brushes For light work, especially stainless steel, boiler and steel construction, polishing workshops, apparatus construction, kitchenand hospital supplies, etc.

Offer via gebr. Suhner Shaft Grinding Machine Rotofera DKM 4 Flexible shaft machine shaft grinding machine grinding Rotofera The 7-speed transmission Speed range: 850, 1600, 2100, 3200, 5700, 8000 and 12000 min-1 (400 V, 50 Hz, 3 Ph, 1.0 kW) Continuous - Separation of motor and tool guaranteed fatigue-free working Applications - Grinding - Disconnect - Roughing - Milling - De-rusting - Polishing - Brushes For light work, especially stainless steel, boiler and steel construction, polishing workshops, apparatus construction, kitchenand hospital supplies, etc.

Cerutti coating machine for Paper, films and Aluminium Rotogravure printing Description: Rotogravure press for papers coating. Technology: water based. The eventual coating of aluminium and plastic films should be verified whether in compliance with the existing driving rollers. We can provide an appropriate technology, up-to-date with the latest electronic and process control systems. Below some sectors of application: -Films coating to improve both the technical and physical properties of the product (Barrier effect) as well as its printability after the film extrusion. -Paper coating pre and post vacuum metallisation Process description: The substrate is placed on the unwinder and driven to the coating units, which may change, based on the rheology of the lacquers in use. Successively the coated substrate enters the dryer, which provides for the vehicle evaporatio ...

Huber Rotamat Feinstrechen, used Gap 5-12mm Qmax to 840 l / s Operating modes: Manual, automatic, backward More info and pictures on request.

Huber Rotamat Feinstrechen, used Gap 5-12mm Qmax to 840 l / s Operating modes: Manual, automatic, backward More info and pictures on request.