CNC Floor Milling Machine for Bed CNC control Heidenhain iTNC 530 Controlled NC table 1600 x 1600 mm Table dimensions 5500 x 2600 mm Travel X-axis 8000 mm Y-axis travel 2100 mm Travel Z-axis 1300 mm Travel W-axis 1000 mm C-axis swivel of the milling head body by 360° A-axis swivel of the milling head by 180° Spindle speed 36 - 6,000 rpm Spindle motor 42 / 30 kW Spindle holder DIN 69871-SK 50 Tools in Tool Magazine 48 If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
Screw conveyor for various materials in very high-quality design with replaceable wear parts, electrically driven, feed length approx. 7 m, feed width approx. 1 m, discharge in the middle, hardly run, very good condition, for example suitable for filling a conveyor belt with the wheel loader, etc.
x-travel:16300 mm y-travel:2600 mm z-travel:1600 mm spindle taper ISO:50 spindle turning speed range:22 - 4000 U/min rapid traverse:24 / 36 m/min main drive:37 kW total power requirement:50 kW with CNC HEIDENHAIN TNC 430 automatic Universal Milling Head automatic toolchanger 90-pockets coolant attchament and chip conveyor
x-travel: mm y-travel: mm z-travel: mm x-axis: 6000 mm y-axis: 2600 mm z-axis: 1600 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Milling machine, universal milling machine, tool milling machine, drilling and milling machine -clamping table: 705 x 310 mm -Device table: rotatable/tiltable/swiveling -X/Y/Z travel: 550/340/420 mm -Spindle mount: SK40 -Speeds: from 46 to 2110 rpm -Feed: 12 to 254 mm/min -Pinole stroke: 80 mm -Rapid traverse: mm/min -Coolant device: -Dimensions: 1620/1700/H1810 mm -Weight: 1768 kg
x-travel: 550 mm y-travel: 350 mm z-travel: 400 mm table surface area: 1130x330 mm number of T-slots: 5 T-slot - width: 14 mmH8 T - slots distance: 63 mm number of tools: SK 40 quill stroke: 80 mm milling-head swivable +/-: 180° total power requirement: kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The ...
A CNC universal milling and drilling center SHW is available. Travel X/Y/Z: 6000mm/2100mm/1500mm, milling head swivel: 180°, rapid traverse X/Y/Z: 8m/min, speed: 4500rpm, spindle power: 31.5kW, machine dimensions X/Y/Z: approx. 11000mm/9000mm/6000mm, weight: approx. 44000kg. Documentation available. On-site inspection is possible.
x-travel: 1000 mm y-travel: 700 mm z-travel: 600 mm Control: CNC feed stepless: 2-4000 total power requirement: 20 kW weight of the machine ca.: 7 t dimensions of the machine ca.: 7 lm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 2500 mm y-travel: 1300 mm z-travel: 900 mm Control: Heidenhain iTNC 530 table surface area: 2500 x 800 mm table load: 5,0 t tool taper: SK 50 DIN69871 spindle turning speed range: 36 - 4000 U/min feed range: 2 - 12000 mm/min main drive: 25 kW total power requirement: 50 kW weight of the machine ca.: 17 t dimensions of the machine ca.: 8,4 x 4,5x 3,8(3,9) m The main engine was overhauled in September 2022 for € 6,000. The machine was partially overhauled in 2007 Scope of overhaul: Feed motors were overhauled New Heidenhain iTNC 530 control system with new main spindle drive (Siemens) Retention of the control cabinet and feed drives Geometric overhaul of the machine Overhaul of the tool changer Defective guideway covers were repaired or replaced The milling head was completely overhauled approx. 3 years ago. Equipment: CNC control Heidenhain iTNC 530 Horizontal/vertical swivell ...
Manufacturer: SHW Type of Machine: PowerSpeed 5 Condition: used Find more here - / Contact us at -
x-travel: 2500 mm y-travel: 750 mm z-travel: 1000 mm table surface area: 2550 x 800 mm spindle taper: SK 50 control: HEIDENHAIN, TNC 150 B The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 3000 mm y-travel: 1350 mm z-travel: 1400 mm spindle taper ISO: 50 turning speeds: 22-1400 U/min Rotary table: 800x600 mm Table dimensions: 2500x1200 mm Feed: 5-3000 mm/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1800 mm y-travel: 1000 mm z-travel: 1000 mm table surface area: 1000x1000 mm turning speeds: 4000 U/min head swivability: 90 ° Tool changer: 45 chip conveyor: control: Heidenhain type: total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 16300 mm y-travel: 2600 mm z-travel: 1600 mm Control: Heidenhain type: TNC 430 tool taper: ISO 50 spindle turning speed range: 22-4000 U/min feed in x - axis: 36000 mm/min feed in y - axis: 24000 mm/min feed range Z-direction: 24000 mm/min main drive motor: 37 kW Tool changer: 90 coolant: : total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
