SERVOMAC ct used machines

Control card, output card, controller -Manufacturer: Servomac -Type: CT 104D -Number: 2x control cards available -Price: per piece -Dimensions: 215/220/H55 mm -Weight: 2.3 kg

Control card, output card, controller -Manufacturer: Servomac -Type: CT 134A -Number: 2x control cards available -Price: per piece -Dimensions: 20/165/H130 mm -Weight: 0.14 kg

Control card, output card, controller -Manufacturer: Servomac -Type: CT 112A -Number: 2x control cards available -Price: per piece -Dimensions: 130/290/H50 mm -Weight: 1.1 kg

Control card, output card, controller -Manufacturer: Servomac -Type: CT 166 -Number: 2x control cards available -Price: per piece -Dimensions: 20/165/H130 mm -Weight: 0.14 kg

Control card, output card, controller -Manufacturer: Servomac -Type: CT 107B -Number: 2x control cards available -Price: per piece -Dimensions: 20/165/H130 mm -Weight: 0.14 kg

Control card, output card, controller -Manufacturer: Servomac -Type: CT 111B -Number: 2x control cards available -Price: per piece -Dimensions: 20/165/H130 mm -Weight: 0.16 kg

Control card, output card, control -Manufacturer: Servomac -Type: CT 136 -Number: 1x tax card available -Dimensions: 20/165/H130 mm -Weight: 0.14 kg

Control card, output card, control -Manufacturer: Servomac -Type: CT 057C -Number: 6 control cards available -Price: per piece -Dimensions: 20/165/H130 mm -Weight: 0.14 kg/piece

Control card, output card, controller -Manufacturer: Servomac -Type: CT 137A -Number: 2x control cards available -Price: per piece -Dimensions: 20/165/H130 mm -Weight: 0.14 kg

Control amplifier, servo motor control -Case: without control cards -Quantity: 2x cases available -Price: per piece -Dimensions: 700/500/H320 mm -Weight: 40 kg/piece

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Power: 0.8/11/11 kW 60/818/4500 rpm -Speed: 60/818/4500 rpm -Shaft: Ø 48 mm -Number: 2x motors available -Price: per piece -Dimensions: 330/330/H875 mm -Weight: 230 kg

max. plate size: 824 x 1143mm mm min. plate size: 228 x 252mm mm max. speed plates: 15 /h incl. Rip incl. Compressor inkl. Glunz & Jensen MP 85 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cron CTP RRP 4664 G+,64 UV Diodes, 80,000 Plates, Cron Laboo Software with 1-Bit-TIFF spooler, 8 Diodes free of charge for stock, Integrated register Punch: 1 pair of Punch tools for Heidelberg, 1 pair of Punch tools for Komori, Cron Multiformat Autoloader AL-46-50 M3 with interleaf paper removal, 3 cassettes for each 50 plates 0.30 mm or 100 plates 0.15 mm, Cron Online bridge BG46 for plate transport into 3 possible directions (right or left or straight) (perfect for CTP installation in L-shape) Plate Processor Heights Titanium 85 Grafoteam PST-36L Stacker

mit neuem Vakuum Transportband. With new vacumm transportbelt. - Producer Costa - Type S3 CTT 1350 - Year of construction 2003 - Max. part height 3 - 160 mm - 1. Unit - Length belt - Sanding roller ~ 70 Shore - Measure sanding belt 2620 x 1380 mm (1350) mm - 2. Unit - Length belt - Electronic sanding beam Costa, 42 Segmente, Raster 32 mm - Sanding belt speed infinitely adjustable - Measure sanding belt 2620 x 1380 mm (1350) mm - 3. Unit - Length belt - Electronic sanding beam Costa, 42 Segmente, Raster 32 mm - Sanding belt speed infinitely adjustable - Measure sanding belt 2620 x 1380 mm (1350) mm - Distance follower roller 32 mm - Width, segmented sandingbeam 32 mm - Operating side, right - Aggregate height adjustment - Vacuum transport belt - Total connection power 103 A / 48 kW - Voltage / HZ 400 / 50 - Commodity code 84659300

Year 1996, CE norm, complete instructions, control Delem, machine in TOP condition with warranty, more details on request

PTC CTR-C cold water trailer similar but no dynajet, oertzen, falch, ROM, Rioned, plaid, ... - Single-axis attachment on hot-dip galvanized frame with stub-foot with wheel, parking brake, automatic return gear, stand-up, back lights and reflectors, zugoese for 50 mm clutch, 13" tyres and ABS. The following cold water models are available: CTR-C 43/180 | 43l/min. at 180bar | Petrol Engine: Honda GX690 17.7kW CTR-C 55/160 | 55l/min. at 160bar | Petrol Engine: Honda GX690 17.7kW CTR-C 60/150 | 60l/min. at 150bar | Diesel Engine: Kohler KDW 1003 19kW CTR-C 20/350 | 20l/min. at 350bar | Diesel Engine: Kohler KDW 1003 19kW - Dimensions: 3,045 x 1,390 x 1,190 - Empty weight: approx. 350 kg - High pressure pump: Comet TW Premium with integrated gearbox - HD reel: manually with max. 1/2" hose (included) - Water supply reel: manually with 35 m. 3/4" hose - Water tank: 400 l - Op ...

PTC CTR-H Hot water 140°C, steam 140°C/32bar and high pressure steam 150°C/200bar (only for versions 250 and 350 bar) Trailer similar but no dynajet, oertzen, falch, DIBO,.... - Single-axis attachment on hot-dip galvanized frame with stub-foot with wheel, parking brake, automatic return gear, stand-up, back lights and reflectors, zugoese for 50 mm clutch, 13" tyres and ABS. The following hot water models are available: CTR-H 16/250 | 16l/min. at 250bar | Engine: Kohler KDW702 12.6kW CTR-H 21/200 | 21l/min. at 200bar | Engine: Kohler KDW702 12.6kW CTR-H 20/350 | 20l/min. at 350bar | Engine: Kohler KDW1003 19kW - Dimensions: 3,045 x 1,390 x 1,190 - Empty weight: approx. 400 kg - High pressure pump: Comet RW/TW Premium with integrated gearbox Bhdwmzmvai - HD reel: manually with max. 1/2" or 80 m. 3/8" hose (included) - Water supply reel: manually with 35 m. 3/4" hose -  ...

CNC lathe from a school (gymnasium) in geometrically new condition with only about 5,000 on-duty hours, spindle and working hours much less. In the working area the first original lacquer! Control panel without signs of wear! Machine ready to be demonstrated under power. Manufacturer Gildemeister Type: NEF CT20 Control EPL 2 Rotary lining 12x revolver SPW 250mm Bdj9nqivc3 SPH 240mm, Orbit diameter: 280mm Circulating diameter via flat slide: 185mm, spindle passage: 32mm, Pinole stroke: 160mm Switch-on hours: approx. 5,000h, spindle and working hours much less! hydraulic tailstock 12-speed turret Conveyor Coolant device You will receive an automatic offer upon request. Counter-bid desired!

Machine details Bearing number 1105-03132 Machine type CNC lathe - slantbed machine Made GILDEMEISTER Type CTX 400 Built in 2000 Control type CNC Warehouse FRANCE Country of origin Germany Delivery time SOFORT Freight base from location, free loading truck Technical details Turning diameter 570 mm Turning length 635 mm Control Heidenhain CNC Pilot 4290 Turning diameter over bed slide 420 mm Spindle speeds - infinitely 25-5000 rpm Number of driven tools 6 mm Drive 5 kW Information CNC Heidenhain Pilot 4290 C-axis with 5 FESTE vdi holders 1 3 BAKE FOOD 1 X SPAENEFOERDERER WITH REITSTOCK + LNS STANGEN VORCHUB

20153 CUMMINS 6 CTA 8.3GM 163 kW MARINE DIESEL ENGINE GENERATOR TURBOCHARGED AND AFTERCOOLED WATER COOLED YES- 24 VOLT BRAND NEW SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED DIMENSIONS LxWxH (cm) Weight (kg) 1200mm x 800mm x 1350mm 1300 KG

20153 CUMMINS 6 CTA 8.3GM 163 kW MARINE DIESEL ENGINE GENERATOR TURBOCHARGED AND AFTERCOOLED WATER COOLED YES- 24 VOLT BRAND NEW SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED DIMENSIONS LxWxH (cm) Weight (kg) 1200mm x 800mm x 1350mm 1300 KG

20153 CUMMINS 6 CTA 8.3GM 163 kW MARINE DIESEL ENGINE GENERATOR TURBOCHARGED AND AFTERCOOLED WATER COOLED YES- 24 VOLT BRAND NEW SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED DIMENSIONS LxWxH (cm) Weight (kg) 1200mm x 800mm x 1350mm 1300 KG

20153 CUMMINS 6 CTA 8.3GM 163 kW MARINE DIESEL ENGINE GENERATOR TURBOCHARGED AND AFTERCOOLED WATER COOLED YES- 24 VOLT BRAND NEW SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED DIMENSIONS LxWxH (cm) Weight (kg) 1200mm x 800mm x 1350mm 1300 KG

We can offer 2 twin screw extrusion compoundibg lines,manufactured in 2015 diameter 75mm, L/d 40. water circle pellitzer.drive motor power 160kw.short time working, very good condition.Serious buyers contact us. We have many brands and models machines, tell me what you need seriously!

Heidelberg SM 52-4, All washing facilities, Autoplate, CPC (spetioal edition), color adjustment, only 39 mil print number, still in production, in very good condition, and CTP system is also available with added, immediately available