used SEEPEX bn

There are nine pumps available (1) Seepex BN17-12L, power: 5.5kW, year of construction: 2004 (2) 2x Seepex BN17-6L, power: 5.5kW, year of construction: 2006 (3) Netzsch NE60, power: 3.6kW, year of construction: 1978 (4) Flux F550 SF-54/26-TR with motor (5) 2x Flux F550 SF-54/26-TR, with and without motor (7) RUVAC WA501 2008 (8) RUVAC WA 2001, with kneader and cartridge separator.

Attachment: eccentric screw pump Manufacturer: Seepex Type: BN 15-6LT Commission no.: 96373 Year of construction: 1997 Flow rate: 14 m ³/h Pressure in the pressure port: 2.00 bar Speed: 344 rpm Motor: kW 2.24 Inlet: DN 80 PN 16 DIN 2533 Pressure connection: DN 65 PN 16 DIN 2533 Material: Main body GG25 Shaft: 1.4021 Stator: NBR Buna Rotor: 1.2436

Name: Progressing cavity pump used Manufacturer: Seepex Type: BN10 Year of construction: 1999 Material: Normal steel Drive motor: 9.2 kW operating temperature: 20°C Dimensions: L 2400 mm x W 300 mm x H 420 mm Empty weight: 250 kg. Speed: 75 -430 rpm Capacity: 1.5 -12 m3H operating pressure: 16 bar Operating voltage: 380-20 / 655-725 V Protection class: 55 Flanges: DN 80 / 100 Condition: Used Tech. Documentation: No Price: On request

Seepex SRF20/1/2.5 Progressive cavity pump Seepex SRF20/1/2.5 Progressive cavity pump It conveys low-viscosity to viscous media with and without solids and can therefore be used in almost all industrial sectors. From the environmental industry to the chemical industry to food production. The pumps are equipped with round flanged suction and discharge connections, as well as a large spherical inlet for easy inlet of solids media. Series: BCSB Size: 2 Pressure rating: 6L Q (m³/h) 400-2000 l/h RPM: 76-310 kW: 05 You can find more pumps - new and used - in our shop! International shipping costs on request!

Eccentric screw pump Manufacturer: Seepex Series: BN Size: 17 Pressure level: 12 Operating pressure: 10 bar Operating temperature: - 10 / + 30 Flow rate: 10 m ³/h Revolutions: 260 U/min Year of constr.: 1990 in very good condition!

Attachment: eccentric screw pump Manufacturer: Seepex Type: BN 35-12 Machine number: 176490 Year of construction: 2005 Power: 2-40 m3/h Pressure: 1--8 bar Speed: 1450 RPM. Connection suction side: DN 150 Port side: DN 125 Length: 2400 mm Condition: used, ready

Attachment: eccentric screw pump Manufacturer: Seepex Type: BN 1-12 Machine number: 176411 Year of construction: 2005 Capacity: 150-2200 l / h Pressure: 2 bar Speed: 1400 RPM Inlet connection: DN 50 Port side: DN 50 Length: 1200 mm Condition: used, ready

* General * SKU234T259 * LocationBarneveld * MakeSeepex * TypeMD 003-12 * Mach.No.267899 * Main Features * MaterialStainless steel * Motor0.37 KW * Specified Features - Positive displacement pump * MaterialStainless steel * Positive displacement pumps * Pumpcheck * Number of pumps:1 * With motor0,37 kW, 230/400 Volt (1380 rpm) * With variable speed drive91 rpm * InletG 1 * OutletG 1/2 * Information * Mounted on framecheck * Total height0,6 m * Floorspace0,6x0,6 m * Weight100 kg * Extra Specifications2 stages pressure: 12 bar. Max. grain size: 1,4 mm Positive displacement pumpsSeepexPumps > Positive displacement pumpsBrand > Seepex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ...

Seepex eccentric cavity pump, BTI 17, with control cabinet with FU, built in 1994, 2-4 cbm/h, 8-24 bar, speed 70-130 rpm. , drive 9 kw., 400 V., with pre-shredder 640x360 mm inlet, incl. control cabinet in stainless steel

Cat.-Nr. 12-1090 in a very good condition Capacity: 4000 litres/h Year of Construction: 1981 Masch-Nr. 21628 Original Price: Euro 6000,- Measurements and Weight: LxWxH: 126 x 40 x 109 cm Weight: 115 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Used eccentric screw pump SMI - Ruhr pumps Series: SMI Size: 150 Year of construction: 2003 Capacity: 150 m m³/h maximum

BRAND: MIYANO YEAR: 2017 MODEL: BNA-42MSY2 APPLICATION TYPE: TURNING LOCATION: UNITED KINGDOM MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 2388 MM MEASUREMENTS DEPTH: 1450 MM MEASUREMENTS HEIGHT: 1600 MM MACHINE WEIGHT: 3000 KG CONTROL UNIT BRAND: MITSUBISHI MODEL: M730VS MAIN DRIVE NUMBER OF SPINDLES: 1 SPINDLE SPEED RANGE: 6000 1/MIN MOVEMENT Y-AXIS MOVEMENT: +/- 35 MM TURRET NUMBER OF TURRETS: 1 TOOLS SLOTS IN STORAGE: 8 Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - DISTANCE BETWEEN SPINDLES: 360 MM - MAXIMUM CUTTING LENGTH: 235 MM - MAXIMUM CUTTING DIAMETER: 80 MM - BAR CAPACITY: 42 MM - SUB SPINDLE B AXIS MOVEMENT: 360 MM - X1, X2, Y, Z1, Z2: 20 X 12 X 12 X 20 X 20M/MINUTE - SPINDLE MOTOR POWER: 7. 5/11KW - SPINDLE & SUB SPINDLE C AXIS: 0. 001 DEGREE  ...

For sale is a complete frame sawmill as listed below. (Single sale also possible, please register in advance) An annual cut of up to 60,000 solid cubic metres of round timber is possible with the system. With a log length of 4 metres, the current annual cut is approx. 30,000 solid cubic metres in 1-shift operation. The facility is still in operation and can be visited by appointment. Machine Listing: 01. Log feed 4-strand SPRINGER with separator with roller conveyor with log turner with insert 02. Clamping carriage remotely controlled ESTERER Type: FHZ SV Built in 1990 Track width: 110 cm with auxiliary wagon with cabin 03. Frame saw ESTERER Type: HDS Built in 1973 600 stroke max. passage 71 cm with splitting wedge with drive motor 132 kW with front gear with hydraulic saw clamp with saw blades with hook-up 04. Frame roller conveyor Mayrhofer w ...

This MIYANO BNE 51S Lathe was manufactured in the year 1999 and has 16102 production hours. It is equipped with a Fanuc 18T control unit and has 7 axis. The machine has a spindle speed of 54 - 4000 rpm.

This Miyano BNA-42MSY2 Lathe was manufactured in the year 2017. It is equipped with a Mitsubishi M730VS control unit. The machine has a spindle speed of 6000 rpm.

X-travel: 425mm, swing/ over bed/ slide: 970/ 710/ 370mm, spindle rotational speed: 125-1480/min, max. load: 3t, width: 2630mm, height: 2170mm, with tools, was maintained regularly, an inspection is possible.

Esterer BNK 160/R for prisms and round wood . snow-high 160mm built in 1990 roundwood task, block train, roller aisle with spreissel separator, roller aisle with drop.

turning diameter: 330 mm turning length: 1000 mm turning dia. over face-slide: 198 mm turning dia. in gap: 476 mm spindle bore: 36 mm metrical thread cutting: 0,4 - 3 mm threading WHITWORTH: 56 - 4 TPI tailstock travel: 95 mm face slide travel: 160 mm number of spindle speeds: 70 - 2000 (8) U/min upper slide-adjustment: 68 mm longitudinal feeds:: 0,02 - 2,7 mm/U total power requirement: 1,5 mm weight of the machine ca.: 600 kg dimensions of the machine ca.: 1850 x 670 x 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gearboxes, spur gear units used HANSEN Type: RLF41-BNVH-12 Translation i: 111 Shafts approx. Ø 45 / 165 mm Dimensions: approx. 1200 x 750 x 670 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Rated power at 50%ED: 80kVA Short-circuit current: 35.9kA Electrode force: 100-600daN/DH Projection: 550mm --- Welding control: Filius classic 128 programs Machine control PLC Siemens S7-1200F --- Incl. additional options: - Double foot switch - Safety valve 2-channel - Pressure-free lowering of the upper fitting - Adjustment device - Forearm support - Flow monitor, electronic - Electrode power switch, electronic - Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock --- Further information on our homepage

Lns Sprint S2 barfeed - Fanuc 18-T Control

BN 102 C Producer Tos Swing 280 mm Distance between centres 630 mm Cross table adjustment 250 mm Longitudinal table adjustment 510 mm Vertical milling head adjustment 290 mm Machine weight 1000 kg

Stock Number: 3782 CNC LATHE Manufacturer: MIYANO, Type: BNE-51S Machine NO.: 98BX510077, Year of manufacture: 1998 Specifications: Max. swing diameter 51 mm dia. Main engine power 11/7.5 kw Main spindle speed range 4000 rpm Bore through drawing tube 51 mm dia. X axis movement 150 mm X2 Ash Movement 115 mm Z ash movement 380 mm Z 2 axis movement 125 mm Tool turret 1 with 12 stations Powered stations turret 1 6 pieces. Tool turret 2 with 10 stations Powered stations turret 2 5 pieces Counter spindle Motor power counter spindle 5.5/3.7 Kw Max. collet subspindle 41 mm/dia Control FANUC 18T Fabr. Accessories: Charger Kama B4265 fabr. Length: 2600 mm + magazines, height: 1950 mm, width: 2560 mm, weight: 6300 kg

12 stations main turret(6 are driven) - 6 stations sub turret - LNS sprint 552 barfeed new in 2010 - Fanuc 21TB Control.

BAR LATHE MIYANO BNJ 42S :::SPECIFICATIONS::: CNC Model: Fanuc - CNC Version: 18iT - Main Spindle Power: 11Kw - Main Spindle Bar Clearance: 42mm Number of main spindle revolutions: 5000 - Number of tool holders: 2 - Number of first turret tool positions: 8 - Number of first turret motorized units: 8 First Turret X-Axis Travel: 142mm First Turret Z-Axis Travel: 250mm Number of second turret tool slots: 3 Number of fixed tool positions for the second turret: 3 Sub-spindle: yes Sub-spindle speed: 5000 Power against spindle: 5.5Kw Bar clearance: 42mm Z stroke counter spindle : 250mm Bar feeder model and brand: LNS Hydrobar Mini Sprint Chip conveyor: belt conveyor Number of live tool holders supplied: 2 :::D DIMENSIONS AND WEIGHT::: Length: 2700mm Width: 1450mm Height: 1720mm Weight: 4600Kg