We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
SCM Sintex NTE four-sided planer Working width 23 – 180mm Working height 6 – 105mm Number of spindles: 4 Spindle system Bottom 7.5kw Rights 7.5kw Left Mountain Spindle speed 6000r.p.m Spindle diameter 35mm Electric up-down and width adjustment of heads Feed rate: 6-12 m/min CE Certified Extraction pipes 1x150mm 2x120mm Machine weight: about 1000kg
used
SECOND-HAND 4 SPINDLES FOUR SIDE MOULDER SCM MOD. SINTEX XL – CE RULES Spindle configuration: bottom right left top - working width mm 180 - working height mm 120 - year 2001
used
Horizontal panel saw SCM model SIGMA 90 General characteristics: -useful cutting length 4500mm -useful cutting depth 4300mm -blade protrusion 90mm -fluted pressor -pusher with 9 pneumatic grippers -side approach -front planes in bakelite and air veil: * 1 fixed 2500x600mm * 2 x 1500x600mm cabinets Blade group: -Independent blade group and engraver -main blade D=350mm -engraver D=160mm Programming: -control MASTER 124/S Machine according to CE regulations
used
SCM sliding table saw model SI400e: – 3200mm aluminium trolley – motorized lifting of the blade unit, with digital indicator – motorized tilting of the blade unit, with digital indicator – Rip fence with manual adjustment – main blade D=400mm – 3 blade rotation speeds, 3000-4000-5000rpm – independent engraver with external adjustment – engraver rotation speed 8500rpm Machine according to CE standards
used
Sliding table saw SCM SI 400N Carriage length 3200 mm Cutting width on the right side 1320mm Scoring Cutter Main motor power: 5.5kw Scoring motor power 0.75kw Variable saw speeds: 3000/4000/5000 rpm Scoring speed 8500rpm Maximum blade size 400mm Cutting height max 120mm Scoring disc 120mm Manually adjustable angle of up to 45 Manually adjustable blade height Year 2005 CE Certified
used
Sliding table saw SCM SI16 Carriage length 1500mm Cutting width on the right side 1000mm Maximum cutting height 110mm Saw min/max: 200/350mm 45° swivel saw Saw speed variable on the belt 3200/4500/6000rpm Scoring speed 9800rpm 4kw main motor Scoring Motor 0.75kw
used
SCM sliding table saw model SI15WF: – 2500mm steel carriage (2700mm stroke) – tilting blade D=400mm max, 5.5 hp motor, with 3 speeds 3200-4500-6000rpm – without engraver Machine not according to CE standards, for export
used
SECOND-HAND CIRCULAR SAW SCM SI16W - 3200 MM.
used
SECOND-HAND CIRCULAR SAW SCM MOD. SI450 N - carriage mm. 3800 - Cutting width 1270 mm on parallel fence - motor 7.5kw - year 2006 (CE)
used
Power main motor: 7 kW Cutting length: 3,300 mm Cutting depth: 3,200 mm Cutting height: 60 mm Saw blade protrusion: 67 mm Collets: 5 pieces Main saw blade: 320 mm Scoring saw blade: 160 mm Saw carriage feed flow: 0-80 m/min Saw carriage feed return: 0-80 m/min Program slide feed flow: 0-25 m/min Program slide feed return: 0-50 m/min Air cushion tables: 3 Scoring: 1.3 kW Control: PC/PLC with M258 unit Software: Wincut 12 Lift table dimensions: 3,300 x 1,850 mm Lifting table with motorized loading rollers for double-sided loading Cutting optimization program "Cutty" Quick clamping system of the saw blades with a pneumatic blocking device Laser straightening light at kerf Power supply: 400 V, 3 Ph, PE Weight approx. 4,700 kg
used
Specifications: -cutting length 4500 mm -cutting depth 4300 mm -saw height above the table 105 mm -Max. trolley speed 30 m/min -pusher with 6 pneumatic clamps -3 x 1500 x 600 front shelves coated with bakelite -main saw fi 380 mm -saw motor 7.5 kW – weight 4400 kg -scoring motor 1.5 kW -current consumption 55 A -suction 2 x 120.1 x 150 mm -dimensions 7000 x 8200 x 1700 mm
used
Specifications: -cutting length 4500 mm -cutting depth 4300 mm -saw height above the table 115 mm -Max. trolley speed 30 m/min -pusher with 8 pneumatic clamps -3 x 1500 x 600 front shelves coated with bakelite -main saw fi 380 mm -saw motor 7.5 kW – weight 4400 kg -scoring motor 1.5 kW -current consumption 55 A -suction 2 x 120.1 x 150 mm -dimensions 7000 x 8200 x 1700 mm
used
Working width: 180 mm; Working height: 110 mm; Working shafts: 4; Spindle arrangement: bottom, right, left, top; Motor power shaft bottom & top: 7.5 kW; Motor power shaft right & left: 7.5 kW; Adjustment shaft down: -; Adjustment shaft right: -; Adjustment shaft left: handwheel; Adjustment of the upper shaft: handwheel; Planer heads bottom & top: Centrolock; Planer heads left and right: Centrolock combined with roll forming option; Feed speed: 2; Feed roller pressure: Spring; Current consumption: 32.8 A; Extraction connection: Machine Length: Machine Width: Weight:
used
Description: serial number: AB/128460 Technical specifications: Dimensions for pieces to process minimumum squaring: : length 30 mm, width 50 mm maximumum squaring: : length 3200 mm, width 3200 mm saw angle adjustment 0 - 45° minimumum for cutting with paralel guide: 10 mm maximumum for cutting with paralel guide: 1270 mm minimumum height: 3 mm maximumum height: 100 mm with saw blade 315 mm diameter, at 90° maximumum height: 70 mm with saw blade 315 mm diameter, at 45° minimumum / maximumum diameter saw blade: 250 / 315 mm (inner diameter 30 mm) vitesse de rotation saw blade: 4000 rpm scoring blade diameter: 120 (inner diameter 20 mm) vitesse de rotation scoring blade: 8000 rpm fixed table dimensions: 900 x 550 mm mobile table dimensions: 3200 x 360 mm Approx. Onsite Dimension. (l x w x h): 5,200 x 2,400 x 1,700 mm, weight approx.: 770 kg
used
Description: Max. panel width 4500 mm Max. panel length 3200 mm Main saw blade projection 90 mm No of Grippers 8 Max. saw blade projection 90 mm Front support tables yes no. tables 4 Grippers on pusher fence yes No. grippers 8 Max. forward feed speed 12 m/min Saw Carriage 1 SAW CARRIAGE 1 Saw Unit : yes motor power : 7.5 KW Scoring unit : yes motor power : 1.5 KW Max. forward feed speed : 27 m/min Safety standard CE mark yes Total installed power 22 KW Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
used
4-side Planer SCM P 75 Year of construction 1983 Masch. No. 045 8vsoczcl8 Planing width of 180 mm Planing height of 130 mm 4 spindle length 2500 mm Weight 1670 kg L x W x h: 310 x 120 x 180 cm The machine is in good condition, little used, ready for use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
MULTI MOULDERS machine with 7 shafts type SCM SUPERSET 23 PLUS . with SLIDE and RETURN PIECES type MAHROS RP/4 second hand machine CE mark : Yes volt. 380/50 - Composition (7 shafts , 7 independent engines): 1° shaft : lower horiz . motor power Hp 7,5 2° shaft : right vertical . motor power Hp 7,5 3° shaft: left vertical (automatic). motor power Hp 7,5 4° shaft : upper horiz. motor power Hp 10 5° shaft : upper horiz. motor power Hp 10 6° shaft : lower horiz. motor power Hp 7,5 7° shaft : universal 360° . motor power Hp 10 grove table inlet length mm. 2400 feed speed: from 5 to 35 mt./min max. useful working width mm. 230 max. useful working height mm. 120 shaft diameter mm.40 automatic lubrication system weight kgs. 4300
used
Four-sided planer SCM P64 Working width 180mm Working height 100mm 4 spindles Spindle arrangement: Bottom 4kw Right/Left 5.5kw Top 4kw Spindle diameter 35mm Two-stage feed: 6-12 m/min Electric height adjustment Adjustable spindles Entrance table length 2300mm Machine dimensions 3300x1200x1600mm
used
Manufacturer: SCM, Type: P64, Year: 1988, Planing widht mm: 180, Planing hight mm: 105, Number of spindles: 4, Rotations of spindles max. rpm: 6000, Separate engine per spindle: no, Main engine kW: 4, Fully suspended drive feeding: yes, Feeding - kW: 2,5, Feeding speed continous adjustable: yes, Tischlänge mm: 2000, Adjustment - electonically: no, Noise enclosure: yes, Compressed air bar: yes, Wight approx. kg: 2000, Year :1988
used
Manufacturer: SCM, Type: P64, Year: 1988, Planing widht mm: 180, Planing hight mm: 105, Number of spindles: 4, Rotations of spindles max. rpm: 6000, Separate engine per spindle: no, Main engine kW: 4, Fully suspended drive feeding: yes, Feeding - kW: 2,5, Feeding speed continous adjustable: yes, Tischlänge mm: 2000, Adjustment - electonically: no, Noise enclosure: yes, Compressed air bar: yes, Wight approx. kg: 2000, Year :1988
used
SCM Superset XL Four-Sided Planer + Feeder Working width 230mm Working height 140mm Number of spindles: 5 Spindle system: Bottom 5.5kw Rights 5.5kw Left 5.5kw Mount 7.5kw Universal 360° 7.5kw Drive on cardan shafts Variator speed adjustable 6-25m/min Pneumatic clamps SACOT feeder for short parts Spindles with brakes A set of planing heads Complete technical documentation CE Certified
used
SCM Superset XL four-sided planer Working width 230mm Working height 130mm Number of spindles: 7 Spindle system Bottom 9kw Rights 9kw Left 9kw Mountain 9kw Bottom 9kw Rights 7.2kw Left 7.2kw Spindles adjustable in two planes Spindle diameter 40mm Feed speed adjustable on the inverter Drive on cardan shafts Pneumatic clamps
used
Four-sided planing and roll forming machine SCM COMPACT P max. working width ( finished dimension ) 230 mm max. working height ( finished size ) 120 mm Motor power dressing spindle 4 kW Motor power vertical spindles 5.5 kW Motor power upper horizontal spindle 4 kW Profile depth 20 mm Infeed table length 2500 mm Motorized height adjustment of the feed system Feed element before dressing Positioning of the working units: The working units are adjusted at the front of the machine with a mechanical digital display of the position Manual pump for lubrication of the work table Machine is WORKSHOP OVERHAULED IN TOP CONDITION 1 set of planing tools for FREE!!
used
Used four-sided planer Int. Art. Ref. m3491 Manufacturer: SCM Type P 64 B Built in 1988 4 planer shafts YOC 1988 max. planing width 165 mm min. planing width 23 mm max. planing height 105 mm min. planing height 6 mm Spindle speed 6,000 rpm. Weight approx. 950 kg Location: 59425 Unna The machine can be viewed under electricity. We will be happy to send you more photos by e-mail. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfe ...
used
SCM P64 four-sided planer Working width 180mm Working height 100mm 4 spindles Spindle system: Bottom 4kw Right/Left 5.5kw Mountain 4kw Spindle diameter 35mm Two-stage feed: 6-12 m/min Electric height adjustment Adjustable spindles Entrance table with a length of 2300mm Machine dimensions: 3300x1200x1600mm