SCHAFFNER fs used machines

2 stueck fraesmaschinen SCHAFFNER F.17.34, table 750 / 180, with double vertical freskopf Further: 2 piece SCHAFFNER 17.3 also horizontal

2 pieces of SCHAFFNER F.17.34 milling machines, table 750 / 180, with 2-fold vertical milling head Further: 2 pieces of SCHAFFNER 17.3 also horizontal milling possible

Mains filter Schaffner FN351-80-34 from STAMA MC325/S Type:Mains Filter Manufacturer:Schaffner Model No.:FN351-80-34 Used in:STAMA MC325/S Short Description:3-phase mains filter for industrial applications, compact design, 80 A rated current, screw connections. Good used condition, fully functional. Price excl. VAT

High-current EMC filter SCHAFFNER type FS 20364-1200-993 phases, 3 x AC ballast, mains connection module, mains filterInput voltage: 3 x 400 VACEinput frequency: 50 / 60 Hz.Nominal current: 3 x 1200 AAndimension W x H x D: 135 x 260 x 235 mmWeight: 27.5 Kgvery good condition, from stock liquidation, unused2 pieces available, price per piece; used

2 piece F. 17.3 2 piece F. 17.34 Milling machines with double head (duplex), with counter holder for horizontal milling

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 650 mm Table width: 180 mm Longitudinal travel (X-axis): 420 mm Transversal travel (y axis): 110 mm Vertical travel (z axis): 280 mm Spindle speeds: from: 80 rpm up to: 2800 rpm Taper in spindle: 30 ISO Voltage 50 Hz 3x: 380 Volt Motor output: 2.0 HP Machine´s weight about: 650 kg Overall dimensions machine: Length: 1100 mm Width: 800 mm Height: 1600 mm Various accessories: Steady Universal milling head Set of long cutter arbors Set of short cutter arbors Tool cabinet

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 425 mm Table width: 125 mm Longitudinal travel (X-axis): 200 mm Transversal travel (y axis): 100 mm Vertical travel (z axis): 200 mm Spindle speeds: number (steps): 8 from: 100 rpm up to: 4000 rpm Taper in spindle: 30 ISO Voltage 50 Hz 3x: 400 Volt Motor power: 1.1 kW Overall dimensions machine: Length: 750 mm Width: 750 mm Height: 1400 mm Various accessories: Rigide table Set of collets Set of short cutter arbors Tool cabinet Lamp

Type: 100 FSG, Y&l: 1986, granulation plant with circular gas operation, sifter 100 ATP (4 kW Vario, up to 11,500 rpm), and reblow filter K 6 R (2.4 m2 filter area). All in stainless steel. Very good condition.

Pneumatic valve DN 300 Manufacturer: Jaudt Dosiertechnik Maschinenfabrik GmbH Type: Varioschieber FSV Opening width mm: ø 350 Height mm: 130 Max.Working temp. ° C: 80 Operating pressure MPa: 0.6-1.0 maximum operating pressure MPa: 0 Control voltage V: -. Housing: one-piece cast housing in flange version the round face with coarse good Chicane Sealing: slide sheet implementation for with Adjustable stuffing seal Pressure piece from cast aluminium alloy Blade: Stainless steel 1.4301 Slide sheet: eccentric screws galvanized Finish: Stainless steel and aluminum parts blank Grey cast iron housing painted in RAL 9006 Steel parts zinc plated, 10 & #956; m Plate made of aluminium Housing material: Cast aluminium alloy (AlSi 10 mg) shock-proof up to 5 bar Flanschbohrbild: According to DIN 2501 PN 6 Packing material: ARAMIDE (Tmax 280 ° C) Ope ...

Robopac film stretching machinePlatform Ø1500 mmMax pallet size 1200x1200 mm.Max load 1500 kg.Max height 2200 mm.Includes ramp for climbing the machine (height 50 mm.)

Flange ball valve ball valve Böhmer DN600 DN 600 PN16 Naturist FSK 016.600 ball valve lanschkugelhahn / ball valve Manufacturer: Böhmer DN 600 PN 16 Model: Naturist FSK 016.600 Year of construction: 2006 NEW, from stock reversal

Standard ALB ear performance: 30 mm Thread cutting performance: M 20 (option) Thread: M 12 Spindle: MK 3 or SK 30 (option) Quill stroke: 100 mm Longitudinal / cross travel: 350/160 mm Distance spindle/cross table: 80 to 450 mm Table area: 600 x 240 mm Column diameter: 110 mm Total height: Max 1,920 mm Weight: 340 kg Motor pole shift bar: 0.8/1.5 kW Spindle speeds, continuous, selectable: 10 spindle speeds: 80-1,400 rpm 10 spindle speeds: 120-2,160 rpm 10 spindle speeds: 160-2,800 RPM Facilities: A versatile, accurate and handy drilling milling machine. The quiet-running drive and a perfect clamping of Quill guarantee good surfaces when milling. The headstock can be swung out. The stage is precise and precisely adjustable. Pitch 0.05 mm. clamping device for both axes. Full motor protection. Machine incl. Cabinet.

Concrete tester Hilti Ferroscan FS10 Monitor RV10 Scanner RS10 Type Ferroscan FS10 consisting of: -Monitor RV10 -Scanner RS10 -Charger TCU12H -Battery Pack RB 10 -in shock-resistant plastic case The memory of the device is defective. The device works properly, but as soon as you turn it off, it loses the recorded data. The portable Ferroscan system is used for large-scale, fast and simple -Detection and identification of reinforcement iron in Concrete substrates -Measurement of overlap, diameter and position of Reinforcements in concrete substrates e.g. for testing the reinforcement in concrete parts, Walls or ceilings -Measurement of safety-relevant purposes, e.g. for structural engineering -Additional advantage: By locating the reinforcements avoid accidents and damage caused by hits iron, pipes and electrical wires." Bcsepogfc3 The Ferroscan system i ...

ALFA-LAVAL LKH 80/245 FSS 75kW hygienic centrifugal pump. Capacity: 280 m³/hr, 5 bar. Electric motor: 75kW. comes from a TETRAPAK Alcross Bactocatch system. Built in 2008. in very good condition.

ALFA-LAVAL LKH 80/245 FSS 75kW hygienic centrifugal pump. Capacity: 280 m³/hr, 5 bar. Electric motor: 75kW. comes from a TETRAPAK Alcross Bactocatch system. Built in 2008. in very good condition.

ALFA-LAVAL LKH 80/245 FSS 75kW hygienic centrifugal pump. Capacity: 280 m³/hr, 5 bar. Electric motor: 75kW. comes from a TETRAPAK Alcross Bactocatch system. Built in 2008. in very good condition.

WIELAND IS 75 R Mobile Spaene extractor extractor system Manufacturer WieLAND Type IS 75 R Consisting of suction system type IS-75 R and Cooling agent tank, type FS 300, built 1986 Dimensions (LxWxH) approx. 1500 x 1200 x 1700 mm Weight approx. 550 kg Special price

WIELAND IS 75 R Mobile Spaene extractor extractor system Manufacturer WieLAND Type IS 75 R Consisting of suction system type IS-75 R and Cooling agent tank, type FS 300, built 1986 Dimensions (LxWxH) approx. 1500 x 1200 x 1700 mm Weight approx. 550 kg Special price

The surface inspection system is used for 100% control of films. It detects, classifies and logs optical errors with an uplight illumination (top plus bottom). - Modular architecture - Optimal lighting technology - Process synchronization - Real-time error analysis - Automatic error marking / label control - Different error views Circumference: - 2 inspection stations Each 2 x High Speed 80 MHz CCD line scan camera with 4096 pixels (18,000 scans/sec.) Lens adapter, lens, mounting kit and workstation software - Lighting 2 x high-clocked illumination fluorescence with cylindrical lens 2500 mm - Inspection frame - FSP 600 Server

Stainless steel defrost trolley BRÖKELMANN FS5130AB-GLY Specifications: 230V / 50 Hz / 3kW Content: 600 L indirect heating, regulated up to 60°C Safety shutdown at 80°C# Heating medium: Glycerin 60L glycerin filling (new) Total dimensions: H95 x W79 x D148 cm Dimensions tub: H67,5 x W73 x D133 cm mobile, with 2 pulleys & 2 fixed castors with push handle Year of construction: 2016 Function tested, device ready for use Condition see original pictures! If you have any questions, call or email.

Vertical Milling Machine Droop & Rein type FS130 Travel X 2000 mm Travel Y 1000 mm Travel Z 1000 mm Spindle SA 50 Sensitive spindle exit: 200 mm Rotation from 31,5 to 1600 RPM Table size 2400 x 1070 mm Year of construction 1976 Throat depth 950 mm Head Tilt head Spindle motor 22 kW Scale HEIDENHAIN 3 axes New electrical panel in 2006 Voltage 380 V Width 3500 mm Depth 4700 mm Total height 4500 mm Weight 26 T

Figure shows precision flat grinding machine: FSM 2550 AH Table size: 300 x 600 mm Installation height: 500 mm Max table load: 300 kg Engine power: 4.6 kW Connection: 400 V Dimensions: 2300 x 1790 x 2200 mm Weight, approx.: 2000 kg Equipment and scope of delivery: - All castings, such as machine stand, table, etc. made of MEEHANITE® quality casting - Automatic cross and longitudinal feed - Permanent lubrication - Automatic cross-stroke device - Rear splash protection - Grinding wheel - Grinding wheel flange - Pulling device - Balancing mandrel - Balancing scales - Dressing diamond - Machine light - Nivilier elements - Operating tool - Operating instructions - CE Special equipment of our storage machine: - Electric magnetic clamping plate 300 x 600 mm (fine pole) - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Automatic verti ...

Bartell FSW-409 7/8in bead winding machine suitable for PCR tyres 12in to 20in consisting of: - 12 station bead wire let of unit. - Prodicon zig zag cutter Type Z/Z year 1988 (takes sheet compound max 750mm wide and cuts to suitable size for feeding extruder. - 60mm dia coldfeed extruder, L/D ratio 13:1, with 18.4kw DC variable speed motor and 3 x TCU's - Festoon section - Former unit with various Bartell formers available/included. - Siemens S5 plc controls.

Ref.-No. 00574 Designation of the plant Overhauled prefabricated sand slingshot FS5 Manufacturer EIRICH Model FS5 Built in 2014 EIRICH ready-made sand slingshot FS5 as a construction slingshot for arranging on a Flat belt conveyor, belt width 800 mm for loosening ready-made sand Document No:: GI1840 Recommended belt speed: 1.05 m/s Functioning Spinning system with rotor The sand on the belt conveyor passes through the working area of the Rotor. Here, the continuous sand is intensively processed and loosened, contained tubers are crushed. Building Frame of the slingshot in welded construction, bearing consoles adaptable to the belt construction, centile drum (rotor), with comb-like arranged easily replaceable impact bodies Sand trap box with suspended rubber mat to avoid adhesion and wear Inspection flap, screwed, with safety lock, allo ...

SCM fs41 elite Dressing thickness planer Planing width 410mm with 4 TERSA planer knives Two feed speeds 6 and 12m/1 400 V 3KW (4 hp ) S1 100% Dressing table length 2000mm Max chip removal of 5mm Planing shaft D=90mm Work tables made of grey cast iron Table adjustment with numerical display Pass-through height 3-230mm Slanted geared steel feed roller Breaking stop with precise round rod guide 90-45° Suction nozzle 120mm