ROTOX fws used machines

Water slot milling machine, water slot milling machine -Three-spindle -electropneumatic circuit -pneumatic workpiece clamping -Fine adjustment via spindles and handwheels

Double head saw EMMEGI NORMA 400 TU/4 Screwing unit GEVO SE1-SA Double head welding machine URBAN AKS 1200 Single head welding machine PRESSTA EISELE APOLLO End milling machine HAFFNER AF 362 Drain slot milling machine ROTOX FWS 380 Copy router STB F130/S Corner cleaning machine STB WP-OF2 Glazing bead saw HAFFNER GL 172

- technically efficient, ready to work – after full service - pneumatic profile clamping - manual feed

Speeds: 6000 or 12000 rpm Processing: Steel or aluminium profiles Country of origin: Germany

Rotatable support table between 0° and 180°, thus 3-sided machining in one clamping 12,000 revolutions per minute 4 pneumatically controllable copying pins Pneumatic material clamping Minimum quantity spraying device Profile width: 30-120 mm Profile height: 50-100 mm Bar length: 490 - 3,000 mm Weight: approx. 350 kg

A Rotox lock and copy milling machine including a small manual Dalex spot welding machine is available. Profile width: 125mm, profile height: 50mm, milling dimensions X/Y: 265mm/125mm, vertical/horizontal spindle speed: 12000rpm/9000rpm, machine dimensions X/Y/Z: 750mm/700mm/1700mm, weight: approx. 200kg. On-site inspection is possible.

Rotatable support table between 0° and 180°, thus 3-sided machining in one clamping 2 speeds, 6,000 or 12,000 revolutions per minute can be preselected, so that both steel and aluminium profiles can be machined 4 pneumatically controllable copying pins Pneumatic material clamping Minimum quantity spraying device Profile width: 30-120 mm Profile height: 50-100 mm Bar length: 490 - 3,000 mm Weight: approx. 350 kg

Profile width min./max.: 50mm-130mm, profile height min./max.: 50mm-115mm, max. notching depth: 40mm, max. cutter diameter: 180mm, machine dimensions X/Y/Z: approx. 1000mm/1000mm/1250mm, weight: approx. 300kg. On-site inspection is possible.

Offer 26048 Technical data: - 3 sides – machining in one clamping for lock and PZ punches, - etc. to be milled out in aluminium / plastic / steel profiles - Operation via two-hand lever - Material clamping by pneumatic clamping cylinder - Manual profile bar turning device for 3-sided machining - Working range - x (landscape) 250 mm - depending on position - y (longitudinal) 90 mm - depending on position - z (vertical) 120 mm - max. Profile height depending on position approx. 120 mm - max. Profile depth 100 mm - Spindle speed approx. 6000 + 12000 rpm - Pneumatic connection 8 bar - Drive 400 V / 1.5 kW - Space requirements approx. W 650 x H 1550 x D 850 mm - Weight approx. 340 kg

Year: 2010 technically efficient, ready to work – after full service rotary table (3-sided profile machining) cooling and lubrication system copying template compressed air preparation station pneumatic clamps (4 vertical and 2 horizontal)

Year: 2009 - technically efficient, ready to work – after full service - discs: 500 mm - working length: 3700 mm - PC control (Windows XP) - online access - vertical and horizontal pneumatic clamps - automatic disc guards - roller feeder - support for longer profiles

A Rotox lock case milling machine with multi-spindle milling unit is available. Travel vertical/horizontal: 265mm/125mm, max. profile width: 125mm, max. profile height: 50mm, speed: 9000rpm, machine dimensions X/Y/Z: approx. 750mm/700mm/1700mm, weight: approx. 200kg. On-site inspection is possible.

Corner cleaning machine ROTOX Type EPA 472 6605 Year of construction 2010 CNC Corner Cleaning Machine Fully automatic plastering of visible surfaces, outer corners, Sealing grooves/areas, inner corners on PVC window frames and sashes, also with radii, curves and slopes. Automatic profile feeding Integrated reversible arm for turning frame elements Variable tool loading with up to 12 tool positions Tool diameter 170/190 mm Machinable profile width 50 mm – 130 mm Machinable profile height 50 mm – 115 mm Revolutions 5500 rpm. Current consumption 22.8 amps Voltage 400 volts Frequency 50 Hz Compressed air 6-7 bar Weight 1,980 kg Machine dimensions approx. 6000 mm x 4000 mm x H 2000 mm

A Graule notching machine and a Rotox copy milling machine are available. 1) Graule AS 450 notching machine, year of manufacture: 1994, saw blade diameter: 350mm/450mm, bore: 40mm, speed: 2800rpm, max. notching dimensions X/Y/Z: 250mm/110mm/153mm, weight: approx. 400kg. 2) Rotox KF 347 copy and lock milling machine, year of manufacture: approx. 1992, speed: 12000rpm, machining dimensions X/Y/Z: 315mm/130mm/200mm, max. workpiece cross section X/Y: 200mm/100mm, machine dimensions X/Y/Z: approx. 1300mm/850mm/1650mm, weight: approx. 350kg. An on-site inspection is possible.

A Graule notching machine and a Rotox copy milling machine are available. 1) Graule AS 450 notching machine, year of manufacture: 1994, saw blade diameter: 350mm/450mm, bore: 40mm, speed: 2800rpm, max. notching dimensions X/Y/Z: 250mm/110mm/153mm, weight: approx. 400kg. 2) Rotox KF 347 copy and lock milling machine, year of manufacture: approx. 1992, speed: 12000rpm, machining dimensions X/Y/Z: 315mm/130mm/200mm, max. workpiece cross section X/Y: 200mm/100mm, machine dimensions X/Y/Z: approx. 1300mm/850mm/1650mm, weight: approx. 350kg. An on-site inspection is possible.

Flange bearing, housing bearing, flange bearing unit -Manufacturer: PTI, flange bearing unit type FWS40U -Bore: Ø 40 mm -Mounting hole: hole spacing 102 x 14 mm -Number: 3x flange bearing available -Price per piece -Dimensions: 128/128/H50 mm -Weight: 2.2 kg/pc.

The LPG forklifts Manufacturer: Toyota Type: Tonero 35 Model No.: 02-8FGJF35 S/N: 8FGJF35-82059 Year of Make: 2022 Reading operating hours: 1,528 h Load capacity: 3500 kg Net weight: 4980 kg Lifting height: max. 3300 mm Power: 42 kW Equipment: full cab, duplex mast (height: approx. 2300 mm), hydraulic side shifter, hydraulic tine adjustment with extendable forklift tines is part of the ONLINE AUCTION of the Operating and office equipment of a window construction company   approx. 400 positions best. e.g. from: Hegla Maschinenbau GmbH & Co. KG LPLF Q15F, processing line for plastic profiles for window frames and frames Schirmer Maschinen GmbH, sash/frame assembly line Urban GmbH & Co. Maschinenbau KG, semi-automatic hardware assembly line Urban GmbH & Co. Maschinenbau KG, glass assembly line, glazing bead assembly line Urban GmbH & Co. Maschinenbau KG, manual v ...