4 ROTOX copy milling machines used machines

Speeds: 6000 or 12000 rpm Processing: Steel or aluminium profiles Country of origin: Germany

Rotatable support table between 0° and 180°, thus 3-sided machining in one clamping 12,000 revolutions per minute 4 pneumatically controllable copying pins Pneumatic material clamping Minimum quantity spraying device Profile width: 30-120 mm Profile height: 50-100 mm Bar length: 490 - 3,000 mm Weight: approx. 350 kg

Rotatable support table between 0° and 180°, thus 3-sided machining in one clamping 2 speeds, 6,000 or 12,000 revolutions per minute can be preselected, so that both steel and aluminium profiles can be machined 4 pneumatically controllable copying pins Pneumatic material clamping Minimum quantity spraying device Profile width: 30-120 mm Profile height: 50-100 mm Bar length: 490 - 3,000 mm Weight: approx. 350 kg

Year: 2010 technically efficient, ready to work – after full service rotary table (3-sided profile machining) cooling and lubrication system copying template compressed air preparation station pneumatic clamps (4 vertical and 2 horizontal)

Offer 26048 Technical data: - 3 sides – machining in one clamping for lock and PZ punches, - etc. to be milled out in aluminium / plastic / steel profiles - Operation via two-hand lever - Material clamping by pneumatic clamping cylinder - Manual profile bar turning device for 3-sided machining - Working range - x (landscape) 250 mm - depending on position - y (longitudinal) 90 mm - depending on position - z (vertical) 120 mm - max. Profile height depending on position approx. 120 mm - max. Profile depth 100 mm - Spindle speed approx. 6000 + 12000 rpm - Pneumatic connection 8 bar - Drive 400 V / 1.5 kW - Space requirements approx. W 650 x H 1550 x D 850 mm - Weight approx. 340 kg

A Rotox lock and copy milling machine including a small manual Dalex spot welding machine is available. Profile width: 125mm, profile height: 50mm, milling dimensions X/Y: 265mm/125mm, vertical/horizontal spindle speed: 12000rpm/9000rpm, machine dimensions X/Y/Z: 750mm/700mm/1700mm, weight: approx. 200kg. On-site inspection is possible.

A Rotox lock case milling machine with multi-spindle milling unit is available. Travel vertical/horizontal: 265mm/125mm, max. profile width: 125mm, max. profile height: 50mm, speed: 9000rpm, machine dimensions X/Y/Z: approx. 750mm/700mm/1700mm, weight: approx. 200kg. On-site inspection is possible.

Profile width min./max.: 50mm-130mm, profile height min./max.: 50mm-115mm, max. notching depth: 40mm, max. cutter diameter: 180mm, machine dimensions X/Y/Z: approx. 1000mm/1000mm/1250mm, weight: approx. 300kg. On-site inspection is possible.

Water slot milling machine, water slot milling machine -Three-spindle -electropneumatic circuit -pneumatic workpiece clamping -Fine adjustment via spindles and handwheels

Rotox KF 347 copy and lock milling machine, year of manufacture: approx. 1992, speed: 12000rpm, machining dimensions X/Y/Z: 315mm/130mm/200mm, max. workpiece cross section X/Y: 200mm/100mm, machine dimensions X/Y/Z: approx. 1300mm/850mm/1650mm, weight: approx. 350kg. An on-site inspection is possible.

Year: 2009 - technically efficient, ready to work – after full service - discs: 500 mm - working length: 3700 mm - PC control (Windows XP) - online access - vertical and horizontal pneumatic clamps - automatic disc guards - roller feeder - support for longer profiles

Double head saw EMMEGI NORMA 400 TU/4 Screwing unit GEVO SE1-SA Double head welding machine URBAN AKS 1200 Single head welding machine PRESSTA EISELE APOLLO End milling machine HAFFNER AF 362 Drain slot milling machine ROTOX FWS 380 Copy router STB F130/S Corner cleaning machine STB WP-OF2 Glazing bead saw HAFFNER GL 172

- technically efficient, ready to work – after full service - pneumatic profile clamping - manual feed

AUTOMATIC COPY SHAPER machine type BALESTRINI JUNIOR second hand machine conditions : Excellent, machine like new CE mark : YES with tools : YES with safety protections and instruction booklet machine composed by n. 02 working units max. working length mm. 1400 max. working height mm. 180 max. working width mm. 500 tools rotation speed rpm 8400 feed speed of carriage : from 0,5 to 15 mt/min retun feed speed carriage mt.min. 70 spindle motors power Hp 10 x 2 hydraulic pump motor power Hp 4 volt. 380/50

x-280 ,y- 200 , Z 315 , Table dimensions 380x380/250x500 A lot of writings,much more than pictured

Automatic double copy milling machine - longitudinal copy milling machine Manufacturer: Wigo Model: 1075 Working length: Workpiece with straight end faces .. 1300mm Wersktück with rounded end faces .. 1000mm Working width: max. 200mm Working height: max. 130mm Feed continuously 0.5 - 12 m/min Milling units: 2 x 4 KW Hydraulic unit: 1.1 KW Additional 2 milling unit on the right side. Clamping cylinder pneumatic: 2 pcs.

Type: Univer FC 100 Power: 1.2 kW Power supply: 380 Volt Current consumption: 3 A Weight ca: 125 kg Directly from the customer used from November from CH-Pratteln available.

Copy Shaper / Copy Lathe Brand: Geiger Model: 8CD Milling + Grinding Workpiece length max. 1500mm

SPECIFICATIONS: Machining length: max. 2500 mm Machining width: max. 350-900 mm COMPOSITION: Station I: Milling machine right-left (2 x 11 Kw) Station II: Milling machine right-left (2 x 5.5 kW) Station III: Grinding unit right-left (2 x 3.7 kW) Station IV Grinding unit right-left (2 x 3.7 Kw) EQUIPMENT: 8 pushers for machining 1 hydraulic pump 1 control box 1 control panel 1 protective grille

COPY SHAPER machine PADE UINZE 2300 2T second hand machine machine for simultaneously shaping both sides of the treated piece of wood. the machine is suitable for the production of chairs, tables, beds, armchairs and furniture elements in general. technical details : machine composed by 2 units : 1+1 shaper units . motor power Hp 5,5 each one max. working useful length mm.2500 max. working width mm. 360 max. working heigth mm. 160 speed rotation shaper units rpm 8500 hydraulic carriage forward speed mt./min. 0 / 25 hydraulic carriage return speed mt./min. 40 hydraulic pump motor power Hp 5,5 net weigth kgs.2600 volt. 380/50

Year: 2011 - technically efficient, ready to work - after full service - 3-spindle - 2 copying templates - pneumatic profile clamps - infeed and outfeed feeders - cooling and lubrication installation

CARVING machine type ANDREONI STANDARD 12 second hand machine working conditions : good Technical details : - rotary device for the simultaneous rotation of the model and the pieces (3D) - manual chuck of mandrins unit - also to work with flat pieces n.12 spindles distance betwen spindles mm. 300 rotation speed by HF converter rpm 6.000 / 12.000 max. working length ( on rotation ) mm. 1900 net weigth kgs. 2500 volt. 380/50 With tools : Yes ( as in photo attach )

GeneralCNC Swiss type lathe with Fanuc control; Control: FANUC 310 iTB Working areaTurning diameter33 mmSpecial equipmentHinged belt chip conveyor with Discharge height 1200 mm Aut. bar feeder IEMCA BOSS 545/32 E, max_ L=3200 mm, incl. guide channel diam. 18 mm

GeneralTwo spindle Swiss turning automatic lathe; Control: Fanuc 310is Working areaBar diameter max.42 mmChanging kit from steady to sliding headstockChanging kit from steady to sliding headstock including application bush type Dunner B236 and bush-spindle syncronismDrive for support for back workingDrive for support for back working operation (slide 2) power 0.55 KWAxial drilling unit for back work.oper.Axial drilling unit for support for back working operation (slide 2) with 2 rot.spindles, junction for collet ESX/ER 20 and 2 cyl.junction diam.25mmDouble tool h. for ext.machining on rev.Double tool holder for external machining on revolver for shaft 16x16Double drill hold. on rev.cyl.junct.d.25Double drill holder on revolver with cyl. junction diam.25mmRad.driven mill.-drill.unit on rev.Radial driven milling and drilling unit on revolver with junction for collet ESX/ER 20 ratio 1:1 sp ...

General2 spindles automatic lathe - 2 cross slides - Main and counter spindle - Y axis on slide 1 - Y axis on slide 2 - C axis on main spindle - C axis on counter spindle - Chip tank with coolant system and coolant pump - Part unloading chute; Control: Numeric control Fanuc 32i Working areaBar diameter max.20 mmCounter spindle collet cleaningCounter spindle collet cleaning with coolantChanging kit from steady to sliding headstockChanging kit from steady to sliding headstock including application bush type Dunner B260 and bush-spindle syncronismAdditional charge for belt type chip conveyorAdditional charge for belt type chip conveyor, compatible with shaft-unloading-device Specific chip removol systems (for example: scraping blades chip conveyors, with additional filtering systems) are recommended in case of short chip material machininOil mist filter for emulsion or oilOil mist filter fo ...