5 ROTAKEM extruders used machines

EXTRUDER

90 mm Extruders Machine, 2024 Model Gearbox: YRE2430XEİ: 18.67 Motor: Gamak brand, 30 kW, 1470 RPM Transmission: Belt / Pulley Overall Dimensions: 2700 mm / 1500 mm Production: Made in Turkey, 2024

EX-225 L/D 1600/225 Extruder Gearbox: Farrel Motor: Gamak brand, 110 kW, 1480 RPM No TCU No Control Panel Transmission: Belt / Pulley Dimensions: 4000 / 1800 / 2500 mm Production: Made in USA Extruder with Hot Feed

EX-120 L/D:1600/90 Gearbox: Leyond Motor: Gamak, 37 kW, 1475 RPM TCU: None Control Panel: None Transmission: Belt - Pulley Overall Dimensions: 2700 x 1800 x 1500 mm Production: Made in ENGLAND

L/D : 1500/90 REDUCTOR LEYOND MOTOR : VEM MOTOR 1470 D/DK 1 UNIT TCU NO PANEL BAND PULLEY TRANSMISSION GENERAL DIMENSIONS: 2300 * 1500 * 1900 ORIGIN: ITALY

1300 X 1400

STOCK BLENDER

750 x 750 Vulcanization Press

110 Tons Press Machine 70-55 table size, 48-33 between colons with PLC Hydrolic

90 EXTRUDER 200/600 KG CAPACITY WITH PLC

Key data: 35

X(S)N 35*30 KNEADER CLOSED MIXER Net Volume : 35L Motor Power : 55 KW Tilting Motor Power : 2.2 KW Rotor Speeds-Front/Rear : 30/24.5 Dimensions (LxWxH) : 3200*1900*2950 Weight : 6.3 TON

X(S)N 110*30 KNEADER CLOSED MIXER Net Volume : 110L Motor Power : 185 KW Tilting Motor Power : 5,5 KW Rotor Speeds-Front/Rear : 30/24.5 Air Pressure Used: 6-8 bar Water Pressure Used : 3-4 bar Dimension (LxWxH) : 4075*2712*3580 Weight : 15 TONS

750 X 750 2 units of brand-new 400-ton machines with 800 strokes, PLC-controlled, with screen and scale

X(S)N 55*30 KNEADER CLOSED MIXER Net Volume : 55 L Motor Power : 75 KW Tilting Motor Power : 3 KW Rotor Speeds - Front-Rear : 30/24.5 Air Pressure Used : 6-8 BAR Air Usage Amount : 60(m3/h) Water Pressure Used: 3-4 Size-(LxWxH)(mm) : 3230*1927*2958 Weight : 7 Tons

Piston diameter: 500 mm 500-ton hydraulic pressing force 600 stroke 250 bar pressure PLC controlled, dual-screen, with measuring scale

660 x 2130 Bolling Dough Mixing Machine

Curing tunnel, 20 cm width 6-unit press, 500 x 500, 6 stations Double-deck press

80-liter slicing machine with adjustable speed and rotation; capable of cutting to the desired dimensions. Servo motor PLC-controlled, adjustable

Troester.200mm H/F strainer M/C Number 7175-71 L/D 6.5/1 Roller Feed 350mm. Hinged strainer head with hydraulic clamp. 125KW AC v/s motor. On single bedplate. With controls.

According to the description below

We´re offereing successfully since many years twin-screw compounding extruders >> NEW segmented screws and cylinders, LD ratio due to your request Side-feeders, vacuum ports and accessories Please contact us for further information

1 x Buss PR200? Ko-Kneader, supplied fully refurbished by Buss in 1995, G130 gearbox, 11 L/D ratio, with 340kW dc motor and controls. Including oil heater and TCU 2t/hr output. Spare screw and barrel segments.

1 x Berstorff GmbH 250mm strainer extruder, Year of manufacture: 1988, L/D ratio 7:1, power roller feed (300mm wide), with 120kW, 1800rpm DC variable speed motor mounted on top of gearbox (belt drive), with tube head and knife at top for sheet extrusion. Complete with control panel etc and in very good condition.

Manufacturer: Paul Troester Maschinenfabrik/Hannover Year of construction: 1978, machine was in operation until the end of 2015 Screw diameter: 150 mm Length: 16 D (approx. 2,400 mm) Screw speed: 2.5-25 / 4 - 40 U/Min. Centre height of the extruder: 1,100 mm Type of gearbox 3 TH 990 K / 2s, 2 speeds. Gear ratio: = i1 16.5: 1 i2 = 26.4: 1 Maximum gearbox output torque: 45,000 nm Maximum permissible injection pressure: 350 bar without limitation through the extrusion head. The extruder will be overhauled and designed/changed according to customer's specification. Below pictures 1-4 show an extruder overhauled by us.

Iddon HRX 4.5? (120mm) Cold Feed Rubber Extruder Year 1994 LD ratio 17:1 Bostock & Bramley Gearbox ABB Motor: 1994, 95kW, 1870 rpm, 419 amps, 360 volts With 1 x spare vacuum screw With Control Panel