used RIMA rs

KReuzleger Rima RS-10S

Built in 2001 Size max 320 x 250 mm min 260 x 180 mm Pile height 330 mm max min 80 mm Infeed height 890 mm max min 860 mm Speed max 900 Pack. / h

Built in 2001 Size max 320 x 250 mm min 260 x 180 mm Pile height 330 mm max min 80 mm Infeed height 890 mm max min 860 mm Speed max 900 Pack. / h

Format max 470 x 320 mm format 152 x 127 mm power max 18,000 c/h Stack height 235 mm Stackhoehe Pre-stacking basket 124 mm ; ready for use

Size max 470 x 320 mm Weight 520 kg (approx.) Speed max 18.000 c/h Equipment o - special: post code identification ; working condition

Specifications of the straightening machine RM2300/8/9 Engine power in KW: 22KW Straightening machine width: 2300 mm Max directional width 2200 mm Straightening rollers Number: 9 pieces Straightening roll diameter: 95 mm Support rollers Number: 22 pieces Support rollers below: 12 pieces Support rollers on top: 10 pieces Sheet thickness max: 8 mm

Specifications of the straightening machine RM2300/8/9 Engine power in KW: 22KW Straightening machine width: 2300 mm Max directional width 2200 mm Straightening rollers Number: 9 pieces Straightening roll diameter: 95 mm Support rollers Number: 22 pieces Support rollers below: 12 pieces Support rollers on top: 10 pieces Sheet thickness max: 8 mm

Specifications of the straightening machine RM2300/8/9 Engine power in KW: 22KW Straightening machine width: 2300 mm Max directional width 2200 mm Straightening rollers Number: 9 pieces Straightening roll diameter: 95 mm Support rollers Number: 22 pieces Support rollers below: 12 pieces Support rollers on top: 10 pieces Sheet thickness max: 8 mm

Specifications of the straightening machine RM2300/8/9 Engine power in KW: 22KW Straightening machine width: 2300 mm Max directional width 2200 mm Straightening rollers Number: 9 pieces Straightening roll diameter: 95 mm Support rollers Number: 22 pieces Support rollers below: 12 pieces Support rollers on top: 10 pieces Sheet thickness max: 8 mm

Stacker

Printing area 500x400 mm 220v Pre-owned

Description: tube diameter: 75 mm consisting of three parts:  , 1/3 preparation table: dimensions: 4100 x 700 x 1000 mm 2/3 pipe finishing machine O25 (D=75 mm): dimensions: 6300 x 1000 x 1300 mm 3/3 receiving table: dimensions: 4100 x 600 x 1000 mm  , please also have a look at the video of this machine weight approx.: 4,000 kg, Approx. Onsite Dimension. (l x w x h): 6,300 x 2,000 x 1,300 mm

Good working conditions

Ex-protected agitator plant, consisting of: 1 St. Drais Dissolver RSV 41 EX (31.6 kW), 2 pcs stirring container 1,250 l. (double-sanded, made of V2A, 7 bar pressure-resistant),

Explosion-proof dissolving line, consisting of: 1 pc. Drais Dissolver RSV 41 EX (31,6 kW), 2 pcs. high pressure vessels 1.250 l. (V2A, 7 bar), 1 pc. stage with rails and stairs.

General information / technical data: mechanical vertical Interior Maschinein used excellent condition Tractive effort at 3 m / min: 4000 KG Space speed: 3 m / min Return speed: 6 m / min maximum stroke: 1000mm maximum tool length: 1200 mm Table area: 450 mm x 250 mm Table breakthrough: 90 mm Workpiece diameter: any Dimensions: h x w x d 1610 x 630 x 855 mm Power supply & power: 380 Volt 50 HZ / 2.2 / 4,5KW Optional accessories: • Thread cutting coolant/fluid pump • electrical scanning of the clamping JAWS (tool collection control to prevent against accidentally driving back the drawbridge) • manual central lubrication • manual table 7 piece thorns Ã?20-(6), 25-(8), 30-(10), 40-(12), 48-(14), 50-(14), 60-(18)mmzur manufacturing of grooves in different angles (= Groove width of a thorn) Comment: The double spindle dr ...

max. tensile force: 20 to, max. stroke 1250 mm, max. cutting speed: 7m/min, maximum return speed: 25 m/min. max. workpiece 580 mm, max. tool 90 mm, clearing: 2 pieces, round-clock table, automatic workpiece feeder device, year 1960

Used injection molding machine with Siemens controller, Manufacturer of Husky Data plate: Load supply no. 1 400V 207 A, 50 Hz, 3 p + N + PE system Biggest motor 110 A Total load heating 90 A Short circuit intermittent performance 35 kA Load supply Nr 2 Type of machine: LX225 RS60/50 Relay individually on request. The machine can be visited like after consultation with us.

Surface grinding machine. Magnetic chuck of 550x250mm. Table travel: 700mm. Grind surface area: 600x350mm. Max. height: 375mm. Cross travel: 300mm. Wheel: 350x127x50 / 300x127x100 Weight: 2900Kg.

Surface grinding machine. Magnetic chuck of 550x250mm. Table travel: 700mm. Grind surface area: 600x350mm. Max. height: 375mm. Cross travel: 300mm. Wheel: 350x127x50 / 300x127x100 Weight: 2900Kg.

Manufacturer: Risco Calibration gear type RS 251 for filling machine RS 3005, RS 4003, RS 5005 Ask for offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 info@inter-wiba.com.pl abc.inter-wiba.com.pl

Manufacturer: Strothmann Type: FW KFW RS25 5T Year of construction: 2015 Available quantity: 12 pcs. Location: Nuremberg Payload: 5000 kg Dimensions: 1.2 x 1.26 m Width over all: 1420 mm Installation height: 0.6 m Track gauge in main direction: 1100 mm Track width in transverse direction: 1000 mm Drive power: 0.25 kW Powertrain: bevel gear, two cardan shafts and four hubs for connection Weight: 1000 kg Base frame: Sturdy welded construction Loading area: four manually adjustable sliders with grids to provide center nests in four stages Included: drive cassettes, pneumatic lifting device for lane change, floor centering, coupling mechanism for towing operation The beams were used in a line for transporting and assembling gearboxes and motors OPTIONAL: The entire line with rail system and control cabinets etc. is optionally available until dismantling in mid-Novembe ...

Cell with robot KAWASAKI RS005L A + band saw Year of construction / robot: 2010 Control: CNC 6-axis Max arm range: 903 mm Max load capacity: 5 kg Country of origin: Japan

Cutter 65 ltr. CPL. Stainless steel mixing speed

Crack Control Panel type EOK Through light control for detection of hairline cracks in the foil before filling