used RIBON rur

Ribon RUR1500 metric, Italy made, universal OD/ID grinding machine, in very good condition, with low hours. The machine has electric table movement, and sold with many accessories. Now stock clearance, price reduced by 15% from 9350 to 7950 EUR net! (2020.07.12.) EXW price, loaded for free on suitable truck. EU shipping at very friendly prices. Please ask if any questions. B/C: 1500mm Max. grinding diameter: 320mm Centre height: 160mm Max. weight suspended between centres: 170Kg Size of the grinding wheel: 355 (410) x 32 (60) x 127mm (The cover could take 455mm wheel) Work spindle bore: 24mm Work spindle taper: Morse 4 Taper of centre support: Morse 3 Speed of wheel: 1500/ 1730 RPM Work spindle speed: 35-310 F p. perc one increment on X wheel: 0.005mm Table swing: + - 5° Work spindle housing swing: -30° és + 90° ID spindle diamete ...

Cylindrical grinding machine make RIBON type RUR-E-1000Year 1984Tip distance: 1000 mmTop height above table: 160 mmGr. grinding diameter: 320 mmhöchstzul. Weight between the tips: 70 kghöchstzul. Weight flying: 20 kgNormal size of the grinding wheel: 355 (410) x32x127 mmhöchstzul. Width of the grinding wheel: 60 mmDrm. the workpiece spindle bore: 24 mmMorse cone of the workpiece spindle: No. 4Morse cone of the tailstock: No. 3Morse taper of the red. Sleeve of the workpiece spindle head: no. 3Rotation speed of the grinding spindle: 1700/2100 rpm.Rotation speed of the workpiece spindle: 35-310 rpm.Table feed: 190-300-380-470-600-940 mm / p.Mautomatic grinding wheel feed p. Table turn: 0.005-0.01-0.015 mmGrinding wheel feed by hand lever: 0.005 mmGrinding wheel feed at each graduation of the handwheel: 0.005 mmMicro fine feed per line: 0.001 mmTilting of the table for taper grinding betw ...

Universal cylindrical grinding machine Incl. internal grinding deviceTip height: 160 mm. Grinding length: approx. 500 mm. Headstock holder: MK 4 Coolant system, various grinding wheels and documentation. Unfortunately without a tailstock. Dimensions, LxDxH: approx. 1800 x 1200 x 1700 mm. Weight: approx. 2000 Kg. Neat ready for use condition. The machine can be inspected and demonstrated under power by arrangement and is immediately available.

grinding diameter: 320 mm grinding length: 1000 mm centre height: 160 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic internal and surface grinding machine make RIBON type RI 200Year of construction 1985sm. Grinding diameter: 6 mmmax. grinding diameter: 100 mmmax. grinding length: 200 mmmax. table lift: 400 mmTop height: 170 mm4 workpiece speeds: 155 - 455 rpm.2 spindle speeds: 14000/28000 rpm.Revolutions of the face grinding spindle: 4000 rpm.Speed of the table adjustable: 0 - 8 m / minkl. Feed of the internal grinding head: 0.005 mmautomat. Feed of the internal grinding head: 0.005 / 0.010 / 0.015 mmDrive power Workhead: 0.35 HPDrive power internal grinding head: 2 / 1.7 hpDrive power plane grinding head: 0.75 hpDrive power hydraulics: 1.4 hpDrive power cooling device: 0.15 hpDimensions L x W x H approx: 2200 x 1600 x 1600 mmWeight approx: 1500 kgWith- Internal grinding spindle- Face grinding head- Diamond stripperused, in very good conditionPrice on request.Delivery: ex warehouse or locatio ...

We have a second Hand Ribon Internal Grinder we are looking to se11 good condition inspection possible

Pierce Control Automation RUR 2500 P working range: 2.1 m x 6.1 m control: Burny 10 LCD Completely welded portal construction without screwed connections o linear guide in the transverse axis o AC servomotors (12 000 mm/min.) o Digital synchronization on the laeng axis o CNC control system BURNY 10 LCD Plus with touch screen o membrane keyboard o flyingmounted cutting buttons o Automatic initial adjustment of the plasma torch o voltage monitoring of the plasma torch height o 1 torch parking lot outside the cutting area o circuit breaker at the end of all axes 1 x Plasma Kjellberg 160i with manual gas console cutting up to 25mm qualifying cut Optional autogencan Completely factory-assembled machine assembly and commissioning ready for use

The CNC-controlled autogen/plasma cutting machine RUR 2500GP is a completely welded portal construction without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HPR260XD plasma system is suitable for use in sheet thicknesses up to 64 mm. The system delivers a high-quality cutting quality, high productivity and reliance with low operating costs. Equipment: ? CNC control system Pierce-19 with 19 touchscreen ? Energy chains with cables and loops ? A motorized plasma torch with automatic initial setting and burner ? Pneumatic anti-collision system ? Plasma cutting unit HPR260XD for cutting structural steel up to a material thickness of 64 mm, hole piercing up to 38 mm, beard-free cut up to 32 mm, manual gas console ? Two three-burner autogenschraegschneidkoepfe with electrical finishing and burner attachment control for  ...

; ready to use

The CNC-controlled autogen/plasma cutting machine RUR 2500GP is a completely welded portal construction sizing without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HiFocus 280i plasma system is suitable for use in the sheet thickness range of 0.5 - 50 (70) mm. As a soft switch inverter, HiFocus 280i offers a fully electronic power source for the power range up to 280 A. The system provides the best cutting results in the field of laser-like cuts and offers a higher service life of the wear parts. Equipment: ? CNC control system Pierce-19 touchscreen ? Energy chains with cables and loops ? A motorized plasma torch with automatic initial setting and burner ? Pneumatic anti-collision system ? Plasma cutting unit HiFocus 280i for cutting structural steel with recommended material thickness of 0.5 - 50 mm, punching up  ...

The CNC-controlled autogen/plasma cutting machine RUR 2500GP is a completely welded portal construction sizing without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HiFocus 280i plasma system is suitable for use in the sheet thickness range of 0.5 - 50 (70) mm. As a soft switch inverter, HiFocus 280i offers a fully electronic power source for the power range up to 280 A. The system provides the best cutting results in the field of laser-like cuts and offers a higher service life of the wear parts. Equipment: ? CNC control system Pierce-19 touchscreen ? Energy chains with cables and loops ? A motorized plasma torch with automatic initial setting and burner ? Pneumatic anti-collision system ? Plasma cutting unit HiFocus 280i for cutting structural steel with recommended material thickness of 0.5 - 50 mm, punching up  . ...

; now ready

The CNC-controlled plasma cutting machine RUR 2500P is a completely welded portal construction without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HiFocus 161 i plasma system from Kjellberg with Contour Cut is suitable for use in the sheet thickness range of 0.5 - 40 (50) mm. As a soft switch inverter, HiFocus 161 i offers a fully electronic power source for the power range up to 160 A. The system is the multi-talent of plasma cutting technology for marking and cutting construction blades, alloyed steels, aluminium and all electrically conductive materials. (see Pdf ) Equipment: ? CNC control system Pierce 19 with touchscreen ? A motorized torch with automatic initial setting and burner ? Plasma cutting unit HiFocus 161 i for cutting structural steel with recommended material thickness of 0.5 - 38 mm, hole bars up  ...

Pierce control automation RUR 2500 P Work area: 2.1 m x 6.1 m Control: Burny 10 LCD Fully welded Portal construction without bolted connections o LM Guide in the transverse axis o AC servo-motors (12 000 mm / min.) o Digital synchronization on the longitudinal axis o CNC control system BURNY 10 LCD Plus with touch screen o Membrane keyboard o 'Flying' bearing inserts o Automatic initial setting of the plasma torch o Voltage monitoring of plasma torch height o 1 burner parking outside the cutting area o Circuit breaker at the end of all axes 1 x plasma Kjellberg 160i with manual gas console Cut quality cutting up to 25 mm Optional autogen retrofittable Completely Factory reconditioned machine Installation and commissioning on request

Inv. Num. : 6623 Type: RUR Control Automati Producer: Pierce Created: 2006 Parameters: Control system: BURNY 10 LCD Working table length: 6000 mm Working table width: 1600 mm Plasma source: KJELLBERG HiFocus 130 Equipment: Flow Control Fine Focus Labeling device LeibInger JET 2 SE

Cylindrical grinding machine RIBBON RUR 32/1500.

Inv. Num. : 6643 Type: RUR 2000 GP Producer: Pierce Created: 2008 Parameters: Control system: BURNY 10 LCD Plus Track spacing: 2000 mm

: Rurack VS 350 : ja : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Metal circular saw make RURACK type VS 300-03Year 1995Cutting area flat: 125 x 90 mmCutting area flat / miter: 95 x 85 mmCutting area angle iron: 125 x 90 mmCutting area Miter: 95 x 85 mmCutting area pipes: 100 mmSaw blade size: 300 x 2.5 x 40 mmDrive power: 1.6 / 2.1 kWWeight: 230 kgExternal dimensions: 550 x 800 x 1700 mmWith- Cooling device- Underframeused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Automatic labeling train manufactured by Dibal, model LS 3130, Automatic equipment with Static weighing to label weight and fixed prices. Allows you to label products with weight information and fixed prices. Ideal for top labeling. LS-3130 SERIES MODEL WEIGHING TYPE Dynamic and static. 6 kg / 2 g with L270 x A430 mm trolley. LABELLING SYSTEM TYPE OF PRINTING Direct thermal and ribon. PRINT HEAD. 3 ́ ́ long life and resolution 8 dots / mm APPLICATION OF LABELS Pneumatic piston applicator, in upper labeller also possibility by air blowing "Air-jet ®" (AA LABEL Top label, from A30 x L35 mm, up to A80 x L100 (3") STRUCTURE – CONSTRUCTION AISI 304 stainless steel and anodized aluminum FEED. Electrical: 230 V and 50 Hz; 115 V and 60 Hz. Air: max. 150 l/min (at 5-8 bar) MACHINE MEASUREMENTS Tape height 800 x 950 adjustable legs. Maximum height 1450-1860  ...

Brush deburring machine, wire brush RAIMANN & CIE USM 58 Year: 1987 Rürsten diameter approx. 280 mm Table dimensions 500 x 160 mm Table height and distance adjustable 1500 u. 3000 rpm 2,2,2 kW 380 V 700 x 600 x 700 mm

Posiadane oprzyrządowanie: 1. Profil płasko - owalny 90 x 55 x 2,6 - standard + zmienny - promień wewnętrzny 145 mm (łatwy sposób gięcia) 2. Profil płasko - owalny 60 x 30 x 2- standard + zmienny - promień wewnętrzny 135 mm (gięcie łatwy sposób) 3. Rura 60,3 x 2,9 - standard + zmienny - promień wewnętrzny 150 4. Rura 76,1 x 2,8 - tylko standard - promień wewnętrzny 152 W sumie posiadamy 7 kompletów matryc do gięcia i walcowania rur i profili. Charakterystyka: 5 osi sterowanych elektrycznie: Y= Gięcie X=Przesuw Z=Rotacja B1=Przesuw boczny zacisku B2=Przesuw boczny pilota Y Max. szybkość gięcia 0/1” – 150 Y Tolerancja +/- 0 – 0,1 X Max. szybkość posuwu mm 1” – 1.000 X Tolerancja +/- mm – 0,1 Z Max. szybkość rotacji 0/1”- 450 Z Tolerancja +/- 0 – 0,1 Max. średnica rury - 90X4 mm Max. średnica rury dla promienia zmien ...

This PIERCE RUM 4000 GP Plasma CNC Cutting Machine was manufactured in 2012. It comes with a Hypertherm HPR 260XD plasma source, bevelling head and Lantek software (dongle). The RUM series represents the most recent iteration of CNC profile cutting machines, amalgamating the robust construction quality of the MAXI model with the favorable price-to-output ratio characteristic of the RUR machine.