We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
pressure:250 t table length:4000 mm table width:3000 mm Controls:SIEMENS SIMATIC C7 PRESS DESIGN:. - frame design : 4 column :. - moving bolster : yes :. PRESS FORCES:. - total force (nominal):250 to PRESS TABLE:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mm RAM:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mm RAM (HYDR. PRESS):. - number of main-cylinders:1 - approximation velocity max.:50 mm/s - restoring force of ram:85 to RAM EJECTORS:. - stroke:300 mm - force:14 to DIE CUSHION (TABLE CUSHION):. - force of cushion:20.5 to - stroke:320 mm TOOL ASSEMBLY DIMENSIONS:. - distance table - ram max.:2750 mm - distance between columns (H-frame):4100 mm - Free passage between side columns (width):1500 mm ELECTRICAL SPECIFICATIONS:. - total power consumption:45 kW - mains voltage:400 V - mains frequency:50 H ...
used
2886: 1 gebr. Difiting press 200 kN Fabr. REIS, type TUS 60 OK 20, Bauj. 1991 with hydr. Control Arb.-Ber.: Stroke approx. 700 mm, drive power: 7.5 kW Accessories: extendable table 670 x 570 mm, swing-out top plate 670 x 570 mm, Mounting height 740 mm Other: Passage between the columns 620 mm, Space requirement L/W/H 1870 x 1620 x 3000 mm, Weight approx. 3.5 tons. very good condition
used
Tuschier- and test injection press make REIS type TUS 60 A 10 HMachine -No: 177/66, built in 1966Table surface: 590 x 600 mmMax. Shaped area: 600 x 1200 mmMax. Mold height: 680 mmMax. Mold weight: 2.5 tStroke of the table: 500 mmEjector stroke: 200 mmEjector force at 100 atm oil: 2000 kgPressing force infinitely variable: 0 - 10 tControl capacity: 1/100 mmSwing radius of the upper swivel plate: 92 °Stroke speed stepless: 0 - 80 mm / sLoad capacity of the upper swivel plate: 1500 kgLoad capacity of the carriage plate: 2500 kgHeight of the column guide: 245 mmInjection volume: 2.5 lSpec. Spray pressure: 2 - 15 kg / cmDrive power: 5.5 kWHeating power: 1.2 kWAir connection: 2 - 15 atüDimensions L x W x H: 1420 x 1360 2810 mmWeight approx. 2300 kgWith- Test sprayer- Heater- ejector- swivel top plate m. hydr. locklittle usedPrice on request.Delivery: ex warehouse or location free loading tru ...
used
Spotting Press Fabr. REIS Type TUS 60 OK-40 HWMasch. -No: 693/73 built in 1973Press force: 40 tTable or size of the ram surface: 670 x 470 mmPassage between columns wide / long side: 620/470 mmgr. distance between clamping surface and plunger: 740 mmRam stroke: 770 mmPress speed: 20 mm / sRapid traverse: 50 mm / sOpening speed: 34 mm / sEjector force: 3 tEjector stroke: 200 mmHydraulic drive: 380 V, 9.5 kWSpace required including space for aussfahrb. Table and pestles: 2200 x 1875 x 3000 mmWeight approx: 2400 kgWith- compl. electrical device- Control panel for the electrical system and hydraulics- Test sprayerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM ...
used
Spotting- and test injection press make REIS type TUS 60 AMachine -No: 791, built in 1974Max. Mold area: 600 x 1000 mmMax. Mold height: 727 mmMax. Mold weight: 2500 kgEjector force at 100 atm oil: 2000 kgPressing force infinitely variable: 10 tControl capacity: 1/100 mmSwing radius of the upper swivel plate: 92 °Load capacity of the upper swing-out plate: 1500 kgLoad capacity of the carriage plate: 2500 kgHeight of the column guide: 245 mmInjection volume: 2.5 lSpec. Spray pressure: 2 - 15 kg / cmColumn diameter: 80 mmDrive power: 5.5 kWHeating power: 1.2 kWAir connection: 2 - 15 atüDimensions L x W x H approx.: 1420 x 1360 2810 mmWeight approx. 2300 kgWith- Control panel- Test sprayer- Heater- ejectorused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We ...
used
Spotting and test spray press make REIS type TUS 60 / 0K 20Machine -No: 19137/79 Year 1979Technical specifications:Press force: 20 tRetraction force: 10 tgr. stroke: 775 mmEjector force: 3.0 tEjector travel: 200 mmOperating pressure: 175 barTable mounting surface: 570 x 670 mmDistance between columns: 620/470 mmInstallation height: 740 mmPiston diameter: 120 mmDrive power: 7.5 kWtotal installed power: 9.5 kWDimensions L x W x H: 1900 x 1200 x 3100 mmWeight approx: 2300 kgWith- Test spray device- 2 hydr. sockets- separate control cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Key data: 40 t, 1000 mm, 590 mm
Machine Type: Hydraulic Spotting Press / 4-Column Press / Tool Testing Press Manufacturer: REIS Model: TUS 60 OK - 40 H Year of construction: 1979 Condition: good Offer Type: Used Machine Specifications: Compressive force: 40 t Projection: Passage between columns: 490 mm Table: 1000 x 590 mm, movable Installation height: 940 mm Propulsion: 7.5 kW Remark: Swivel unit for upper plate Weight: 3500 kg The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.
used
Pressing force: 40 t table size: 670 x 470 mm plunger surface: 670 x 470 mm clearance between the pillars: 620/470 mm gr. Height: 740 mm Preß speed: 20 mm / s rapid traverse: 50 mm ejector force: 3T Electr. Supply: 380 V, 9.5 kW space: 2200 x 1875 x 3000 mm weight: 2400 kg
used
Closing force: 40,000kp, connected load: 7.5kW.
pressure:100 t table length:1280 mm table width:900 mm stroke max.:1100 mm dimensions:2100 x 3800 x 3900 mm Approx. weight (w/o operational materials):11 t Engine Output:9,5 kW pre-running speed:48 mm/sec Return speed:44 mm/sec Oil Tank Capacity:140 l distance between columns:1150 mm distance table/ram:1035 mm Table height above ground level:630 mm ram surface:1000 x 1200 mm column travel -side:705 mm workpiece weight:max. 7 t Plum:max. 3,5 t Press speed:8 mm/sec
pressure:200 t table length:1500 mm table width:1200 mm stroke max.:1450 mm open height:1650 mm weight:15 t power capacity:22 kW voltage:380 V surface area of ram:1500 x 1200 mm workpiece weight top:max. 4.000 kg workpiece weight max.:10.000 kg rapid traverse - down:48 mm/sec rapid traverse - up:40 mm/sec ram stroke speed - under load:6 mm/sec dist. between pillars (left to right):1250 mm Table height above ground level:630 mm Oil Tank Capacity:400 l
used
pressure: 40 t table length: 670 mm table width: 570 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m wheel away & tiltable table hydraulic ejector upper plate movable Technische Daten / technical details: Druckkraft / pressure 40 to Durchgang zw. den Ständern / daylight between columns 620x470 mm max. Einbauhöhe / max. day light 740 mm Hub / stroke 770 mm Tischgröße / table size 670x570 mm Antriebsleistung / drive capacity 9,5 KW Gewicht der Maschine ca. / weight 3200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: . t table length: . mm table width: . mm total power requirement: . kW weight of the machine ca.: 22 t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 100 t table length: 2000 mm table width: 1580 mm stroke: mm pressing speed: mm/sec voltage: 400 V return capacity: t max. table loading capacity: 10.000 / 20.000 kg total power requirement: 18 kW weight of the machine ca.: 22 t dimensions of the machine ca.: 5,65 x 2,95 x 5,85 m Serial no: 03.246.00 max. Distance between columns (width) 1620 mm max.load upper table no swiveling 10t / swiveling 6t max.load lower table 22t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
BRAND: REIS YEAR: 2000 MODEL: TUS 80-100 APPLICATION TYPE: OTHER (SM) LOCATION: GERMANY MACHINE TYPE: OTHER AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MACHINE WEIGHT: 7000 KG CONTROL UNIT BRAND: REIS Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - NOMINAL FORCE: 1000 KN - MAX. MOLD WEIGHT: 5000 KG - INSTALLATION HEIGHT: 950 MM - CLAMPING PLATE SIZE: 800X1100
used
No. 5282: 1 Gebr. Spotting press 400 kN Fabr. RICE Type TUS 90 OK 40 Passage 930 x 705 mm Table top 900 x 1280 mm Plunger plate 900 x 1200 mm Installation height 1035 Space requirement approx. 3 x 2 x 3.6 m Transport dimension approx. 4 loading meters, Width 2.20 / height approx. 2.80 Weight approx. 8 tons Still ex works Cologne
used
pressure: 40 t table length: 670 mm table width: 570 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure:40 t distance between columns:620 mm stroke:975 mm distance table/ram, max. stroke up, adjustment up:940 mm table surface area:590 x 1000 mm table height over floor:770 mm ram surface:590 x 1000 mm side window:470 mm max. tool weight:2,5 t max. capacity of swivelling ram plate:1,5 t Speed down:0 - 50 mm/s Speed up:0 - 34 mm/s Working speed:0 - 10 mm/s oil volume:150 l power requirement:9,5 kW weight:3,2 t dimensions (WxDxH):2,0 x 2,4 x 3,0 m
used
pressure:100 t distance between columns:1250 mm stroke:1035 mm table surface area:890 x 1280 mm distance table/ram, max. stroke up, adjustment up:1035 mm table height over floor:630 mm ram surface:1000 x 1200 mm side window:700 mm max. tool weight:7 t max. capacity of swivelling ram plate:3,5 t oil volume:180 l power capacity:9,0 kW weight:11,0 t Dimensions (WxDxH):2,1 x 3,8 x 3,9 m ram interlocking:hydraulic
used
pressure:70 t distance between columns:750 mm stroke:900 mm table surface area:700 x 1000 mm Distance table/ram, stroke up:900 mm table height over floor:680 mm ram surface:700 x 1000 mm side window:600 mm max. tool weight:5,0 t max. capacity of swivelling ram plate:2,0 t Speed down:0 - 50 mm/s Speed up:0 - 48 mm/s Working speed:0 - 8 mm/s oil volume:140 l power capacity:9,5 kW weight:8,0 t Dimensions (WxDxH):2,2 x 1,2 x 3,7 m
Ladies and gentlemen, we are pleased to offer larger quantities of rice for sale. If you are interested in our offer, please contact us. Yours sincerely Trade & Translations
used
RICE Category Paletizer Type: RP40 Name of Reis Robotics Manufacturer of rice Serial number 36/xxxxx Year of manufacture 2003 Performance 7 pallets / h. Dimensions approx. 3.000 x 6.000 x 4 000mm Electric 400VAC 50 Hz, 35A PLC type S7 Siemens Control panel touch screen Color red Condition very well maintained, like new Load capacity: 40 kg additional load: 20 kg Repeat accuracy + / - 0.3 mm Number of axes 5
used
Technical data: Loads Load: 70 kg Additional load: 20 kg Workspace: Max range: 1720 mm More info and versions: Number of axes: 4 Repeat accuracy: +/-0.1 mm Weight: 1050 kg to 1200 kg
used
Specifications load Bearing load: 80 kg Further data and types Number of axes: 3 Repeatability: +/-0.1 mm Weight: 1200 kg
used