: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 595 € : 12 mm : 19 mm Weldon : 0.1 kW : 175 mm : 250 mm : 312 mm : 10 kg : 12 mm : 36 mm : 51 mm : 70 mm : 350 U/min The PRO-36 makes holes up to 36 mm in diameter by using annular cutters. The machine can also drill holes up to 12 mm in diameter by means of twist drill bits with Weldon shank 19mm (3/4’’). Compact design and excellent ratio weight/power make this mag drill a very popular choice for customers. Features &, benefits: • Dual bars guide system ensures extraordinary stiffness and adjustment free operation • Compact size and ultra-lightweight - ideal for site work • Rugged one piece slide and gear box for extra stability • Purpose designed motor with heavy duty gear box • Maintenance-friendly design makes it easy to use • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Magn ...
: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 2595 € : 12 mm : 19 mm Weldon : 0.4 kW : 361 mm : 238 mm : 352 mm : 145 kg : 12 mm : 36 mm : 50 mm : 70 mm : 260 U/min : 6 mm This special design battery-operated drilling machine equipped with permanent magnetic base is dedicated to operate in remote areas, where no power supply is available. The base includes very strong neodymium magnets and does not require any electricity to operate. PRO-36 PM Battery is equipped with LED monitoring system that generates signals in green and red colors to indicate the current status of the drill and provide safety information. The drill can be used with convex (min diameter - 80 mm) and concave (min diameter 1000 mm) materials. Up to 47 holes fi 20 mm in 10 mm thick plate can be made when PRO-36 PM Battery is equipped with CAS LiHD 10.0 Ah battery pack. Features and benefits: • LED interface flashes gr ...
: neu : 2025 : 090185 : prompt, Zwischenverkauf v : Polen : 7950 € : 153.44 € : 1 : 47 to : 110 mm : 27 mm : 25x18 mm : 8 s : 16 mm : 700 bar : 479 mm : 135 mm : 388 mm : 117 kg MOBILE HYDRAULICS-POWERSTATION Double action - fully automated process of punching and return Wide range of hole diameters up to 27mm Intelligent control system with inching and automatic load detection Mode indicator light Protection against accidental start-up OPTIONAL: Gantry punching station for increased productivity and operation comfort € 710,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1595 € : 23 mm : 19 mm Weldon : 1.6 kW : M20 : 266 mm : 259 mm : 500 mm : 17 kg : 23 mm : 50 mm : 75 mm : 190 mm : 160 - 250 / 390 - 580 U/min : 8 mm The PRO-52T drilling machine is suitable for hole cutting and tapping applications. Powerful variable speed motor enables milling capacity up to 50mm (2”) and drilling capacity up to 23 mm (7/8”). Machine’s forward &, reverse work modes allow thread cutting up to M20 with Promotech’s new tapping system. Two speed gearbox with continuous speed adjustment allows to set the optimal speed depending on diameter, steel gradeor tool quality. Intelligent speed control system maintains constant motor speed regardless of changing loads. Innovative 360-degree LED indicator facilitates proper machine operation and increases work safety. Features and benefits: • powerful motor with heavy duty 2- ...
: neu : ca. 4 Wochen ab Auftragse : Polen : 1595 € : 1 : 1 : 21 mm : 60 ° : 2740-3290 U/min : 2.2 kW : 21 kg portable heavy-duty machine designed for bevelling steel plates and -pipes guide rolls for easy operation automatic overload protection two milling heads with 10 square cutting inserts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1695 € : 12 mm : 19 mm Weldon : 0.45 kW : 316 mm : 235 mm : 328 mm : 115 kg : 12 mm : 36 mm : 50 mm : 70 mm : 260 U/min : 6 mm The PRO-36 Battery is a drilling machine designed to drill holes of diameters up to 36 mm (1 7/16”) by using annular cutters. The machine can also drill holes of diameters up to 12 mm (0.47”) by using twist drill bits. Cordless drill is equipped with LED monitoring system that generates signals in green and red colours to indicate current condition of the drill and give safety information. Control panel is equipped with so called „vandal resistant” illuminated start/stop switches (green/red) Features and benefits: • LED Monitoring System indicates current condition of the drill and gives safety information • LED interface flashes green when inadequate adhesion is detected due to e.g. gap or thin work piece ...
: neu : ca. 4 Wochen ab Auftragse : Polen : 1760 € : 1 : 1 : 18 mm : 60 ° : 2-5 mm : 1800-5850 U/min : 40 mm : 2.2 kW : 585 mm : 156 mm : 238 mm : 10 kg portable bevelling machine for milling edges of plates and pipes made of steel, aluminum alloys, brass or plastic bevel angle and bevel radius depends on accessories continuous bevel width adjustment overload protection electronic speed control BASIC SET: BM-18 bevelling machine without accessories plastic case 32mm open end spanner allen wrench hex s = 6 Grease for fixing screws(5 g, 0.17 oz) user manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1445 € : 19 mm Weldon : 1 kW : 307 mm : 221 mm : 317 mm : 135 kg : 36 mm : 51 mm : 70 mm : 350 U/min : 6 mm New PRO-36 AUTO is equipped with unique LED monitoring system that indicates current condition of the drill and gives additional safety and diagnostic information. Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation, when drill works in automatic mode. The drill controller keeps choosing the most effective working conditions based on the correlation of motor load, feed speed and the range of allowable cutting parameters for a given tool type and hole diameter. It results in extending tool life of both HSS and TCT cutters and enhanced machine performance. Countersinking and working on thin workpieces, when the LED shows that the clamping force is low (flashing green) are possible in manual mode only. A sa ...
: neu : ca. 6-8 Wochen ab Auftrag : Polen : 26880 € : 513.41 € : 1 : 1 : 30 mm : 60 ° : 500-2920 U/min : 50 - 150 m/min : 3 mm/min : 100 mm : 7.5 kW : 1216 mm : 1275 mm : 850 kg continuous adjustment of spindle speed and feed rate make it suitable for different types of steel and aluminum high speed rotary milling head equipped with 10 inserts cutting inserts for various materials 3D contact wheel control for proper workpiece alignment ergonomic ball roller bench swarf drawer BASIC SET: SBM-500 stationary bevelling machine set of tools user manual in ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6-8 Wochen ab Auftrag : Polen : 16980 € : 326.02 € : 1 : 66 mm : 60 ° : 300-800 U/min : 0 - 1,2 mm/min : 6 mm : 6.5 kW : 1179 mm : 853 mm : 1524 mm : 320 kg portable auto-feed bevelling machine real time measurement and on-screen display double-sided bevelling variable spindle speed milling head including 8 replaceable inserts remote control panel with LCD display max. bevel width: 66 mm at 15° 52 mm at 30° 50 mm at 45° 51 mm at 60° The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Wochen ab Auftragse : Polen : 7390 € : 142.63 € : 1 : 1 : 14 mm : 30 ° : 9 U/min : 6 - 40 mm : 55 mm : 100 mm : 2600 mm/min : 2.2 kW : 589 mm : 541 mm : 320 mm : 65 kg bevelling machine designed to mill plates and pipes made of carbon steel, alloy steel, stainless steel or aluminum alloys bevelling of lower edge in inverted position standard shearing cutter for processing stainless/alloyed steel reversible spindle against stuck milling tool STANDARD SET ABM-14 beveller milling cutter for stainless steel cutter extraction tool tube bevelling shaft tube bevelling washer flat wrenches: 12 - 13 mm, 18 - 19 mm, 24 - 26 mm hex wrenches: 5 / 6 mm user manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Wochen ab Auftragse : Polen : 2095 € : 1 : 1 : 21 mm : 60 ° : 2820 U/min : 1.1 kW : 20 kg portable bevelling machine for processing plates and pipes integrated milling head with 10 square TCT inserts one universal guide plate for bevelling both plates and pipes continuous angle adjustment anti-vibration system for comfortable operations induction motor with increased start-up current pipe bevelling adjustmen: 150 - 300 mm 260 - 600 mm (optional) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
