PALLMANN ref used machines

Manufacturer : Pallmann Grinding disc diameter : 1200 mm

Stock number: U2293-2 Used carbon steel grinding/refining mill by Pallmann (Germany) model PR8. Mill has bolted rotor with diameter 795 mm and stator with diameter 800 mm. Belt driven by el. motor 100 kW, 1480 rpm, 380 V, 50 hz. Manual adjustment of gap between milling plates. Mill has mounted 5 nozzles for feeding gas or liquid inside the milling chamber. Front door bolted with central feeding inlet through feeding chute. Bottom discharge.

Material: steel Engine: 37 kW Weight: 900 kg Length x Width x Height: 1300 mm x 1000 mm x 900 mm Applicable for production of finest plastic-powder: - finest powder without use of nitrogen - best powder characteristic: best flow behaviour, high apparent density and narrow particle distribution - low grinding temperature, in terms of optimal ducting of the air - fully automatic continous operation - simple regluation of particle size. Throughput rate : 50 - 200 kg / h. Very good condition. ********** Are you looking for something else? Write us below! WE PROJECT AND BUILD YOUR ENTIRE PLANT EXACTLY FOR YOUR NEEDS FROM USED AND NEW MACHINES.

Working width_ 600 mm Working height_ 300 mm N of knives_ 3 OTHERS AVAILABLE FROM STOCK

Drive: 55 KW / 1480 RPM / 500 V Speed rotor: 645

Stock# U2293-1 Used stainless steel contact parts horizontal hammer mill by Pallmann (Germany) type PHM 600-350. Mill has internal dimensions of milling chamber L 600 mm x W 350 mm. Top of milling chamber is manually rised. At the bottom mill has a discharge outlet through the screen. At the top of milling chamber there is installed static knife for grinding of product. Rotor has diameter 500 mm x width 345 mm. On the rotor there are 24 rows with hammers, each row consist of 4 hammers. Total number of hammers is 96. Rotor and hammers are designed in non-corrosive steel. Rotor is belt driven by el. motor 75 kW, 2975 rpm, 380/660 V, 50 hz. Mill has side feeding inlet with dimensions 350 mm x 265 mm. Product is moved into milling chamber through three screws. Screws are driven by el. motor 0.55 kW, 2800 rpm, 220/380V, 50 hz and varispeed gearbox with manual adjustment of outgoing rotatio ...

Drives: 45 KW + 15 KW Weight: 2100 kg Dimensions: L 3.50 m x W 1.36 m x H 1.52 m;

GRANULATOR TYPE PALLMANN PS-H 1000 x 1400, 132 kW very good condition incl. 3 sets of rotor knives and stator knives incl. 2 sets of screens, 5 and 8 mm IMMEDIATELY AVAILABLE AND READY FOR USE

we sell a Pallmann granulator IPS 50x1000. Year of construction :2001. The machine is fully operational. The regrind discharge is equipped with an extraction chute. Optionally, we can also offer you other system components, e.g. Cyclone, etc. Control cabinet with input load switching is included.

Drive : 75 KW Dimensions : L 3800 mm x W 1600 mm x H 2200 mm Weight : 3900 kg.

Drive : 110 KW Dimensions : L 2500 mm x W 1300 mm x H 1800 mm Weight : 2800 kg

ID2850 Pallmann year/Bauahr 2001 70 t Impact hammer mill, electric motor 500 KW 400V, output: up to 100 tons/hour, infeed width 2000 mm, rotor diameter 1600 mm, 6 upper feed rollers Impact hammer mill, electric motor 500 KW 400V, output: up to 100 tons/hour, infeed width 2000 mm, rotor diameter 1600 mm, 6 upper feed rollers

Used mill / granulator made by Pallmann, type PS4 - 7.5. New 1972. Speed: Rotor 640

Granulator with rotor width 1000 mm, motor 37 kW, with hopper attachment and hydraulic feed slide. Knives resharpened and whole machine repainted. Very good condition. Optionally with total separator and fan for the regrind.

Refurbished plast agglomerator for sale. Trial run possible for a fee of 1500€. The fee will be charged at the time of purchase.

* General * SKU312X491 * LocationBarneveld * CEcheck * MakePallmann * Main Features * Motor33 KW * Inlet diameter120 mm * Specified Features - Fine Impact Mill * MaterialStainless steel 1.4552 * Fine Impact Mills * Turbo cone millcheck * 2 Driven rotorscheck * Rotor sizeInner roter ø 396 mm: outer roter 400 mm * With grinding trackConidur 1,5: 2: 3 * Housing dimensions ø 800 mm * Inletø 120 mm * Motor22 kW 400 V, 1470 rpm: 11 kW 400 V, 1475 rpm * SpeedInner rotor 3000 rpm, outer rotor 1500 rpm * Information * TypePPS 4-120 * No.139820170004 * Year of construction2018 * Mounted on framecheck * Floor space0,9 x 2,8 m * Total height1,5 m * Weight1600 kgFine Impact MillsPallmannMills > Fine Impact MillsBrand > Pallmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welco ...

* General * SKU430X1346 * LocationBarneveld * CEcheck * MakePallmann * Main Features * Motor150 KW * Inlet diameter250 mm * Width1000 mm * Specified Features - Fine Impact Mill * MaterialStainless steel 1.4541 (321) * Fine Impact Mills * Hammer millcheck * 2 Driven rotorscheck * Rotor size995 mm * Grinding room sizeø 1000 mm * Fixed hammerscheck (60) * Hammer width250 mm * With sieve cagecheck * Housing dimensions ø 1400 mm * Inletø 250 mm * Motor110 kW, 380 V, 1500 rpm: 55 kW, 380 volt, 1500 rpm * SpeedTurbo wheel drive speed 1590 rpm: sieve basket speed 660 rpm * Information * TypePPSR 10-300 * No.0965.2007.0010 * Year of construction2007 * Mounted on framecheck * Floor space4,00 x 1,545 m * Total height2,85 m * Weight7000 kgFine Impact MillsundefinedMills > Fine Impact MillsBrand > undefined What you can expect from Foeth: -- Machine is in working condition -- At a reduced price co ...

* General * SKU160P705 * LocationBarneveld * MakePallmann * TypePP 4 * No.0668145 * Main Features * Motor22.5 KW * Inlet diameter155 mm * Width100 mm * Specified Features - Fine Impact Mill * MaterialMild steel * Fine Impact Mills * Turbo cone millcheck * 2 Driven rotorsimpeller & co-rotating baffle plate * Rotor sizeInner roter ø 396 mm: Outer roter 400 mm * Grinding room sizeø 600 * Inlet155 x 100 mm * Motorcheck 15 kW + 7,5 kW, 380 V * SpeedMax. 4100 rpm: Grinding disc 1450 rpm * Information * Year of construction1968 * With switchgearcheck * Floorspace2,1 x 1,1 m * Total height0,8 mDiscountFine Impact MillsPallmannDiscountMills > Fine Impact MillsBrand > Pallmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Nether ...

FIMIC RAS+REF 400 FULLY AUTOMATIC SCREENCHANGER, screening area 1.206cm², for PP / LDPE / LLDPE / HDPE / PS / EPS / ABS / PVB, possible setting as : continuous scraping OR scraping on an Amp.threshold OR backflush, it was mounted on extruder producing 800 kg/h with 100-150 my screening, Always used as RAS (REF equipment brand new), 30 kw drive, totally checked in 2024 by constructor, Immediately available, remote connection (Industry 4.0) with pressure control system from pulpit, 4-5 spare laser filters available, multipolar plug connectors, We can supply spare screens for this machine., Laser screen from 80 to 300 µ - Mesh from 180 to 50, Punched screen from 400 to 2.000 µ - Mesh from 40 to 10, ---------------------------------------------------------------------- -----------------, SEE ALSO OUR[OTHER FIMIC SCREENCHANGER](.germanplast/listings?q=GEMA100), installed power - used power ...

Manufacturer: ESSEMTEC Model: Convection Reflow Oven Year of Manufacture: 2016 Type of Machine: Reflow oven soldering station Condition: Good Exterior Dimensions: - Width: 24.016 in (61.0 cm) - Depth: 35.827 in (91.0 cm) - Height: 16.929 in (43.0 cm) Weight: 331 lb (150 kg) Find more here - / Contact us at -

Ultrasonic gauge Krohne. Manufacturer: Krohne Type: Reflex radar BM100 A Year of construction: 2004 Voltage: 100/240 V Frequency: 50/60 Hz Maximum pressure: 16 bar Protection class: IP67 These ultrasonic knives were recently removed from a container and are therefore for sale. You are in good condition and fully functional!

The OPTIV REFERENCE 763 DUAL Z combines a tactile and optical measurement. The Data acquisition via a switching/measuring switch laser as well as white light sensor (chromatic white light sensor/CWS). Measuring range: 600 x 600 x 300mm. Maximum workpiece weight: 150 kg, when using the Glass plate / transmitted light measurement: 50 kg. Accuracy depending on the measuring procedure: 0.5 -. 1, 3μm. machine weight: 3 000 kg. Dimensions (Lxwxh) machine: 1.805 x 1,918 1,890 mm. service area of min. 600 mm. The machine is active and can by arrangement rootstyle are. If you are interested we can provide the entire machine data to the Available.

Manufacturer: Xerox Model: Impika Reference Condition: Condition Find more here - / Contact us at -

Description Refrigeration system consisting of: - PIOVAN AQUATECH SCA 8521, year 2017 - PIOVAN AQUATECH SCA 8521, year 2012 - PIOVAN FC 200 / T, year 2012 - Reservoir - Oil pump - Water pump - Glycol tank

Merck Hitachi 7490 Ri/Refractive Index Detector Merck Hitachi 7490 Ri Detector Flow cell 8 ul Flow rate 10ml/min Ri range 1.0 to 1.75