PALLMANN pp used machines

* General * SKU312X491 * LocationBarneveld * CEcheck * MakePallmann * Main Features * Motor33 KW * Inlet diameter120 mm * Specified Features - Fine Impact Mill * MaterialStainless steel 1.4552 * Fine Impact Mills * Turbo cone millcheck * 2 Driven rotorscheck * Rotor sizeInner roter ø 396 mm: outer roter 400 mm * With grinding trackConidur 1,5: 2: 3 * Housing dimensions ø 800 mm * Inletø 120 mm * Motor22 kW 400 V, 1470 rpm: 11 kW 400 V, 1475 rpm * SpeedInner rotor 3000 rpm, outer rotor 1500 rpm * Information * TypePPS 4-120 * No.139820170004 * Year of construction2018 * Mounted on framecheck * Floor space0,9 x 2,8 m * Total height1,5 m * Weight1600 kgFine Impact MillsPallmannMills > Fine Impact MillsBrand > Pallmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welco ...

Drive : 75 KW Dimensions : L 3800 mm x W 1600 mm x H 2200 mm Weight : 3900 kg.

* General * SKU430X1346 * LocationBarneveld * CEcheck * MakePallmann * Main Features * Motor150 KW * Inlet diameter250 mm * Width1000 mm * Specified Features - Fine Impact Mill * MaterialStainless steel 1.4541 (321) * Fine Impact Mills * Hammer millcheck * 2 Driven rotorscheck * Rotor size995 mm * Grinding room sizeø 1000 mm * Fixed hammerscheck (60) * Hammer width250 mm * With sieve cagecheck * Housing dimensions ø 1400 mm * Inletø 250 mm * Motor110 kW, 380 V, 1500 rpm: 55 kW, 380 volt, 1500 rpm * SpeedTurbo wheel drive speed 1590 rpm: sieve basket speed 660 rpm * Information * TypePPSR 10-300 * No.0965.2007.0010 * Year of construction2007 * Mounted on framecheck * Floor space4,00 x 1,545 m * Total height2,85 m * Weight7000 kgFine Impact MillsundefinedMills > Fine Impact MillsBrand > undefined What you can expect from Foeth: -- Machine is in working condition -- At a reduced price co ...

Stock# U2293-1 Used stainless steel contact parts horizontal hammer mill by Pallmann (Germany) type PHM 600-350. Mill has internal dimensions of milling chamber L 600 mm x W 350 mm. Top of milling chamber is manually rised. At the bottom mill has a discharge outlet through the screen. At the top of milling chamber there is installed static knife for grinding of product. Rotor has diameter 500 mm x width 345 mm. On the rotor there are 24 rows with hammers, each row consist of 4 hammers. Total number of hammers is 96. Rotor and hammers are designed in non-corrosive steel. Rotor is belt driven by el. motor 75 kW, 2975 rpm, 380/660 V, 50 hz. Mill has side feeding inlet with dimensions 350 mm x 265 mm. Product is moved into milling chamber through three screws. Screws are driven by el. motor 0.55 kW, 2800 rpm, 220/380V, 50 hz and varispeed gearbox with manual adjustment of outgoing rotatio ...

Stock number: U2293-2 Used carbon steel grinding/refining mill by Pallmann (Germany) model PR8. Mill has bolted rotor with diameter 795 mm and stator with diameter 800 mm. Belt driven by el. motor 100 kW, 1480 rpm, 380 V, 50 hz. Manual adjustment of gap between milling plates. Mill has mounted 5 nozzles for feeding gas or liquid inside the milling chamber. Front door bolted with central feeding inlet through feeding chute. Bottom discharge.

GRANULATOR TYPE PALLMANN PS-H 1000 x 1400, 132 kW very good condition incl. 3 sets of rotor knives and stator knives incl. 2 sets of screens, 5 and 8 mm IMMEDIATELY AVAILABLE AND READY FOR USE

we sell a Pallmann granulator IPS 50x1000. Year of construction :2001. The machine is fully operational. The regrind discharge is equipped with an extraction chute. Optionally, we can also offer you other system components, e.g. Cyclone, etc. Control cabinet with input load switching is included.

ID2850 Pallmann year/Bauahr 2001 70 t Impact hammer mill, electric motor 500 KW 400V, output: up to 100 tons/hour, infeed width 2000 mm, rotor diameter 1600 mm, 6 upper feed rollers Impact hammer mill, electric motor 500 KW 400V, output: up to 100 tons/hour, infeed width 2000 mm, rotor diameter 1600 mm, 6 upper feed rollers

Used mill / granulator made by Pallmann, type PS4 - 7.5. New 1972. Speed: Rotor 640

Manufacturer : Pallmann Grinding disc diameter : 1200 mm

* General * SKU160P705 * MakePallmann * TypePP 4 * No.0668145 * Year of construction1968 * LocationBarneveld * Main Features * Motor22.5 KW * Inlet diameter155 mm * Width100 mm * Specified Features - Fine Impact Mill * MaterialMild steel * Fine Impact Mills * Turbo cone millcheck * 2 Driven rotorsimpeller & co-rotating baffle plate * Rotor sizeInner roter ø 396 mm: Outer roter 400 mm * Grinding room sizeø 600 * Inlet155 x 100 mm * Motorcheck 15 kW + 7,5 kW, 380 V * SpeedMax. 4100 rpm: Grinding disc 1450 rpm * Information * With switchgearcheck * Floorspace2,1 x 1,1 m * Total height0,8 mFine Impact MillsDiscountPallmannMills > Fine Impact MillsDiscountBrand > Pallmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Nether ...

Material: steel Engine: 37 kW Weight: 900 kg Length x Width x Height: 1300 mm x 1000 mm x 900 mm Applicable for production of finest plastic-powder: - finest powder without use of nitrogen - best powder characteristic: best flow behaviour, high apparent density and narrow particle distribution - low grinding temperature, in terms of optimal ducting of the air - fully automatic continous operation - simple regluation of particle size. Throughput rate : 50 - 200 kg / h. Very good condition. ********** Are you looking for something else? Write us below! WE PROJECT AND BUILD YOUR ENTIRE PLANT EXACTLY FOR YOUR NEEDS FROM USED AND NEW MACHINES.

Working width_ 600 mm Working height_ 300 mm N of knives_ 3 OTHERS AVAILABLE FROM STOCK

Drive: 55 KW / 1480 RPM / 500 V Speed rotor: 645

Drives: 45 KW + 15 KW Weight: 2100 kg Dimensions: L 3.50 m x W 1.36 m x H 1.52 m;

Drive : 110 KW Dimensions : L 2500 mm x W 1300 mm x H 1800 mm Weight : 2800 kg

Granulator with rotor width 1000 mm, motor 37 kW, with hopper attachment and hydraulic feed slide. Knives resharpened and whole machine repainted. Very good condition. Optionally with total separator and fan for the regrind.

Refurbished plast agglomerator for sale. Trial run possible for a fee of 1500€. The fee will be charged at the time of purchase.

Two press brakes LVD are available. 1) Press brake LVD PPBL-H 100/40, year of manufacture: 1993, pressing force: 1000kN, working length: 4000mm, distance between uprights: 3150mm, ram stroke: 130mm, table-to-ram distance: 310mm, throat depth: 200mm, table width: 180mm, table-to-floor distance: 910mm, closing speed: 80mm/s, working speed: 8mm/s, return speed: 60mm/s, oil capacity: 120l, weight: approx. 8200kg. 2) Press brake LVD PPBL-H 165/40, year of manufacture: 1993, pressing force: 1650kN, working length: 4000mm, distance between uprights: 3150mm, ram stroke: 150mm, table-to-ram distance: 350mm, throat depth: 250mm, table width: 180mm, table-to-floor distance: 930mm, closing speed: 80mm/s, working speed: 7.5mm/s, return speed: 70mm/s, oil capacity: 150l, weight: approx. 10500kg. Documentation available. An on-site inspection is possible. Sale of individual units is possible.

Horizontal peeling centrifuge Peony PPCS-555 used for solid-liquid separation in chemical, pharmaceutical &food industry. Horizontal peeling joints are discontinuous filtration centrifuges that are characterized by absolute reliability, even with the highest requirements. They are used in the production of mass, raw material and fine chemicals as well as in the food industry. Manufacturer: Peony Type: PPCS-555 Year: 2013 Drum diameter: 1250 mm Volume: 370 liters Capacity: 555 kg Total 3 pieces available - Horizontal shaft trifuge with perforated filter drum. - Hydraulically actuated wide knife peeling device. - Solid discharge in one of the centrifuges with schurre, in the other two with discharge screw. - Drive via V-belt. - Application discontinuously in batch operation for mechanical solid-liquid separation. - High separation and washing effect, low residual moistu ...

Matrix printer, continuous paper printer Manufacturer: PSi Type: PP405 Year of construction: 2011 Fully functional Voltage: 220V There are a total of 8 pieces. The price is for 1 piece All information without guarantee

Rated output at 50% ED: 60kVA Short circuit current: 24kA Electrode force: 470daN / easy lift Throat depth: 435mm Arm distance, infinitely variable: 180-510 mm Electrodes Cone: Mk2 --- Welding control: WS 708 (7-times, 8-program) --- Incl. additional options: -Two hand start / footswitch -Main switch --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock

Product number: 1293 Type: PPI400 Serial number: 457 Year of construction: 2013 Belt width: 400 mm Belt length: 1200 mm Paper dimensions: 140 x 140 mm In combination with Multiformer400 Only been used as a demo model

pressure: 320 t chamfer lenght: 4000 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 25 t dimensions of the machine ca.: m Brand: LVD Type: PPEB 320/40 CNC brand: Morris CNC model: Solutions ESA 630 Year of make: 1990 Hydraulic Capacity: 320 T Bend length: 4.000 mm Multi V + J-knive Steered backstop X+R Incl. 1 Set of tools Machine weight: 25.000 kg Machine is flat on the ground The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rated power at 50%ED: 35kVA Short circuit current: 19kA Electrode force: 300daN / single stroke Projection: 395mm --- Welding control: WS 708 (7 times, 8 program) --- Incl. additional options: - Foot switch - Pressure-free lowering of the upper fitting - Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock