used OPTIMUM opti

Optimum Opti B22 Pro

Pillars - or drilling machines Smoothness thanks to polished splined hubs High concentricity by hardened and ground spindle Large speed range Heavy, solid casting Drilling depth stop adjustable with millimetre scale Low maintenance gearbox with grease lubrication Electrical connection: 400 V / 3 pH 50 Hz Engine power: 1,1 / 1,5 kW Drilling capacity in steel: Diameter 28 mm Spindle retainer: MK 3 Projection/Quill stroke: 260 mm / 127 mm Spindle speeds/levels: 75 - 2900 min-1/8 Table length x width / T-slots: 376 x 394 mm / 14 mm Column diameter: 92 mm Dimensions Lxwxh: 670 x 550 x 2, 080mm Net weight: 184 kg G & pieces 3034230

Opti B17Pro Bench drilling machine 5 speeds Drilling capacity in steel 16 mm Motor 500W 230V Spindle retainer MK2 Drilling table Tilt/Swivel +-45° / 360° Net weight: 39kg Table length: 235 mm Table width: 220 mm G & pieces 3003171SE

Machine

including machine clamp

x-travel: 1050 mm y-travel: 600 mm z-travel: 600 mm table-size: 1200 x 600 mm tool adaptor: SK 40 turning speed range: 12000 U/min power requirement: 40 kW Control: Sinumerik Steuerung 828D rapid traverse Z-axis: 30000 mm/min rapid traverse X- and Y-axis: 30000 mm/min workpiece weight: 800 kg no. of tools in the magazine: 30 Stück dimensions: 4319 x 2286 x 2928 mm weight of the machine ca.: 7000 kg ** immediately available from stock - Siemens Sinumerik control 828D with 15.6 inch touch display - Difficult execution - High productivity - High reliability - Heavily ribbed, torsion-free machine base - Profile rail with revolving rollers on all axes for high loads - High torque servo drives, direct to the ball screw in all three axes - Precision-ground, preloaded, heavy-duty ball screw (Ø 40 mm x P16 x C3) for high rapid traverse speeds in all axes - Telescopic guideway cover on all three ...

Motor power: 1.1kW/400V; Cutting area: 100mm x 145mm; Coolant Device: Yes; Feed: infinitely variable; Saw blade speed: 45 /90 m/min; Band saw dimensions: 2480 x 27 x 0.9 mm; Cutting angle: 0Â to 60Â; Dimension: 1400mm x 685mm x 1235mm; Weight: 185kg; Low-noise running Stable cast iron design High cutting accuracy due to vibration-free running Lowering of the saw bar via hydraulic cylinder with throttle valve infinitely adjustable microswitch for automatic limit shutdown Coolant device Standard with high-quality bi-metal saw blade Adjustable material stop for serial work Robust machine substructure Ball-bearing saw blade guide Quick-release vice adjustable via handwheel. Clamping the workpiece with handy quick-release lever Easy-to-read angle adjustment scale Overload protection S 275N Motor Circuit Breaker Two Switchable Speeds

turning diameter: 420 mm turning length: 1500 mm swing diameter over bed slide: 250 mm Swingdiameter in the bed bridge: 590 mm centre height: 210 mm Turning length in the bed bridge: 260 mm reus: 16 (45-1800) U/min tail stock: MK 4 quill stroke: 120 mm diameter of quill: 50 mm spindle taper: DIN ISO 702-2 Nr. 6 spindle bore: 52 mm spindle cone: MK 6 feed: längs 17 / 0,05 - 1,7 m/min feed: plan 17 / 0,025 - 0,85 m/min total power requirement: 4,6 kW weight of the machine ca.: 1340 kg dimensions of the machine ca.: 2440 x 915 x 1375 mm Fully equipped leading and tension spindle lathes. TH 4215 with digital position indicator DPA 21 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Handwheels with adjustable fine scale 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Upper slide adjustment rang ...

turning diameter: 330 mm turning length: 830 mm swing diameter over bed slide: 196 mm Swingdiameter in the bed bridge: 170 centre height: 165 mm centre distance: 830 mm Turning length in the bed bridge: 430 reus: 16 (70-2000) U/min tail stock: MK 3 quill stroke: 110 mm diameter of quill: 32 mm spindle taper: DIN ISO 702-2 Nr. 4 spindle bore: 38 mm spindle cone: MK 5 feed: längs 32 / 0,052 1,392 m/min feed: plan 3,2 / 0,014 0,38 m/min total power requirement: kW weight of the machine ca.: 0,52 t dimensions of the machine ca.: 1,7 x 0,75 x 1,6 m Fully equipped leading and tension spindle lathes. TH 3309D with digital position indicator DPA 21/3402040 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 4 - Precisely crafted slide - Handwheels with adjustable fine scale 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Main spi ...

Power: 0.85, 1.5kW; Speed range: 300 - 4000 rpm; Speed levels: infinitely variable; Spindle mount: MK-3; Drilling stroke: approx. 105 mm; Spindle projection: 200 mm; Weight: 152 kg; Smooth-running and powerful electric motor Two speed settings clockwise/anticlockwise rotation V-belt cover with safety switch Digital speed display integrated in the housing concentricity guaranteed less than 0.015 mm measured in the drill quill Height-adjustable chuck guard with microswitch for the greatest possible protection of the user Machine light integrated in the drill head Drilling spindle with precision ball bearing High-quality quick-release drill chuck as standard Precisely machined drill table with diagonally running T-slots, 360Â rotatable with circumferential cooling water chute Thick-walled cast iron column for high force absorption and stability Solid base plate, large dimensions st ...

Hardly used ( year of construction 2021) Metal Band Saw with Swivel Frame from Optimum OPTIsaw S 300DG Specifications Saw blade 2750 x 27 x 0.9 mm Saw blade speed 35 + 70m/min Cutting angle -60 – +45° Cutting range 0° round 255mm Square 190mm rectangle horizontal 190 x 310mm Cutting range -45° round 220 mm Square 190mm rectangle horizontal 135 x 190mm Cutting range -60° round 135mm square 135 mm rectangle horizontal 135 x 135mm Drive power 1.5 KW - 400 Volt Weight 335 kg Dimensions (LxWxH) 1680 x 1600 x 1300 mm Scope of delivery: material stop, bi-metal saw blade, machine base, coolant pump Properties Double mitre up to +45° and -60° Silent operation Heavy-duty cast design High cutting accuracy due to vibration-free operation Ball-bearing saw blade guide Chip brush Automatic shutdown of the saw a ...

Manufacturer: Optimum Machines Model: D360x1000 Technical features: Precision lathes with lead spindle and pulling with closed feed gears for quick and easy change of feed angles, Dimensions (L x W x H): 1920 x 800 x 1250 (DPA 1490) mm, Centre height 180 mm Centre width 1000 mm Ø movement over machine bed 356 mm

- Exhibition machine - new exhibition machine

- Exhibition machine - feed infinitely adjustable, swivelling---------- Technical data ---------- Swivel range: 0 - 60 , Cutting height: 150 mm, Cutting depth: 230 mm, Saw blade speed: 45 / 90 m/min., Saw blade length: 2,480 mm, Motor 400 V: 1.1 kW, Dimensions (LxWxH): 1,400 x 530 x 1,360 mm, Weight: 185 kg new exhibition machine

Description: Part number 300 3171 , Drilling capacity 16 mm , Spindle holder MK 2 , Motor power 0.5 kW , Voltage 230 V Spindle revolutions 500 - 2520 rpm Table dimensions approx. 180 x 180 mm Approx. Onsite Dimension. (l x w x h): 600 x 300 x 850 mm, weight approx.: 40 kg

Description: Drilling capacity: 40 mm Face milling cutter: 100 mm End mill: 32 mm Projection: 275 mm Max. distance, spindle head to table: 445 mm Mounting cone of the spindle: MK 3 Spindle stroke: 130 mm Diameter, quill: 75 mm Spindle head rotation range: 2 x 90° Diameter of column dovetail guide Total height without base: 1150 mm Total length of the machine: 750 mm Total width of the machine: 1185 mm Machine base: 710 mm Spindle speeds 2-stage motor: 12 Spindle speed range: 50 - 2500 rpm Adjustment travel across the table: 240 mm Adjustment travel along the table: 510 mm Clamping surface of the table: 820 x 240 mm T-slot stone size: 16 mm With accessories as shown in the pictures, including a dividing head (diameter: approx. 300 mm), a shaping angle and various other tools for the milling machine With operating instructions as shown in the pictures Approx. Onsite Dimension. (l x w x h) ...

see images and PDF immediately available

see images and PDF now available

Table length: 1650 mm Table width: 360 mm Longitudinal X: 1270 mm Cross Y: 280 mm Vertical Z: 400 mm OPTIMUM - OPTImill MT 200 Universal milling machine 1290 x 280 x 400 mm MACH - ID 6340 Make: OPTIMUM Type: OPTImill MT 200 YOP: 2013 X-Axis    1.270 mm Y-Axis       280 mm Z-Axis       400 mm Table Length       1.650 mm Table Width          360 mm Table load             450 kg Spindle speeds      1750 Rpm Feed rate X-Axis      420 mm Feed rate Y-Axis       393 mm Feed rate Z-Axis       168 mm Stroke pinole             ISO 50 mm Dimensions Length       2.160 mm Wi ...

Description Universal lathe suitable for tooling, fixture construction, training and mould making Peak height: 180mm Speed:25-2000 rpm Technical data Built in 2015 Speed 25-2000 rpm Peak height 180mm (360mm) Peak width 1000mm Spindle passage 38mm Reitstock MK 3 Total power requirement 4 KW Weight 880kg Connection 50 Hz 3x 380V

OPTIMUM D460X1500 tower Optimum brand universal lathe suitable for tools, fixture construction, forming and mold making. circumference diameter above the bed: 460 mm. Speed 25-2000rpm Year of construction / Yom 2014 passage 58mm Sp Height 230mm Tailstock MK 4 tip width 1500mm 5.5kw motor Speed 25-2000rpm Dimensions 2750X1080X1370mm

thickness of jaw: 127 mm clamping width: 0 - 208 in 3 Stufen mm clamping capacity: 4000 kg total power requirement: manuell kW weight of the machine ca.: 52 kg dimensions of the machine ca.: 670 x 151 ( L x H ) mm Furnishing: - hydraulic machine vice - Robust structure for milling, drilling and grinding - Vice body made of high quality cast iron - Guide surfaces hardened and ground - Jaws hardened, ground and exchangeable - Protected spindle - Booster system, little effort required, high pressure when clamping - Wide clamping range thanks to locking bolts with different hole spacings - With turntable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 315 mm cutting diameter: 85 mm stroke: mm mitter cutting - all-position: ± 45 ° turning speed range: 19 / 38 1/min power requirement: 0,75 / 1,5 kW coolant: voltage: 400 V total power requirement: 1,5 kW weight of the machine ca.: 235 kg dimensions of the machine ca.: 0,55 x 0,90 x 1,75 m - Coolant device - Machine base - without circular saw blade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 315 mm cutting diameter: 85 mm stroke: mm mitter cutting - all-position: ± 45 ° turning speed range: 19 / 38 1/min power requirement: 0,75 / 1,5 kW coolant: voltage: 400 V total power requirement: 1,5 kW weight of the machine ca.: 235 kg dimensions of the machine ca.: 0,55 x 0,90 x 1,75 m - Coolant device - Machine base - without circular saw blade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition. Revolving diameter above bed: 420mm Distance between points: 910mm Spindle passage: 52mm Max. workpiece weight: 280kg Spindle taper: MK 6 Spindle speed: 45-1800 rpm Number of gears: 8 Weight: 1560kg Possibility of inspection in operation by prior arrangement.