used OKUMA mu

Max. turning diameter [mm]: 650 Max. turning length [mm]: 1,500, 2,000 Spindle speed [min-1]: 3,000, [4,200] No. of tools: 40 [80], [120], [180] Motor [kW]: 22/15, [32/22] Features: W (Sub spindle), 2S (2 saddle), 2SW, ATC

Used Good Condition Control Type OSP-P200L X axis stroke 690 mm Y-axis stroke 230 mm Z axis stroke 1.545 mm Axis C 360° Axis B 225° Max workpiece vault Ø 630 mm Max. workable diameter Ø 710 mm workable length 1.500 mm Main spindle speed 38-3,800 rpm Spindle nose A2-8 Tool magazine 20 Chip Evacuator Accessories

Okuma Twin-Star LT300 MY with 2 equivalent main spindles and tool turrets (2x12) Speed range: 38-3,800 rpm. Torque: 420 Nm with CNC control Okuma OSP-P200L with tool monitoring system for tool life and breakage with control expansion kit One-Touch-IGF-M-D Gravity Belt Filter SPB4 Coolant pump 20 bar, 40 l/min. 2 x Kitagawa B208 power clamping device Full clamping cylinder programmable right + left Y-axis with stroke for driven WZ stations Interface + servo drive integrated for loading portal Loading portal MIDI diam. 200 x 150 mm Pallet stacking magazine PSM 100/20 Workpiece shuttle, stacking table extension Connection nozzle for air filter (preparation) Turning diameter 350 mm (550 mm above bed) Speed range: 38-3,800 rpm. Torque: 420 Nm Year of construction 07/2011 Operating hours: 25,871 h / Spindle running time: 24,773 h At the end of last year, almost € 6 ...

The machine is in good technical condition, testing possible upon agreement. Lathe with gantry loader. 2 spindles - 6” chucks (165 mm), 2 V12 turrets, 2 workpiece loaders, pick-up stations, 2 Pneumotec workpiece reservoirs, 18 chip ejector positions, OSP-U 100L control system.

OKUMA MA – 400 HA hours switched ON 37572 Hours spindle rotating 16725 Horas Year 2007 Okuma Lathes Okuma LU 15 M – 1000 OKUMA LB 15 OKUMA Multus B300 Okuma VTM 200 OKUMA Genos L3000 MA-550VB; MA-650VB; MA1250; MA12500; MA40; MA400; MA50; MA500; MA550; MA60; MA600 MA6005; MA600HBII; MA650 Okuma LU 15 M – 1000 OKUMA LB 15 OKUMA Multus B300 Okuma VTM 200 OKUMA Genos L3000 Okuma GI-20N OKUMA Multus B300 Okuma LU 15 M - 1000 OKUMA LB 15 Okuma VMC MC-V4A with 4th axis Okuma ACE Center MF-46VA OKUMA LB 15 OKUMA VTM 1200 YB OKUMA MX 45 CNC Machining Centre OKUMA LB15 Okuma LU 45 M OKUMA LT 300 M Okuma MX45VAE Machining Center Okuma VTM 200 1ST OKUMA LT 25-MY CNC Lathe Okuma MX 40 HA OKUMA LB 15 OKUMA MA-50HB OKUMA GENOS M460R-VE Okuma LC 40 Okuma LC 40 OKUMA MC-4VAE OKUMA Twin Star LT 300 M OKUMA MC 40 VA Okuma LR 15 2S 600 Okuma ...

OKUMA GENOS M460R-VE CNC machining center was built in 2016 in Taiwan. This technologically advanced machine was designed with the goal of providing its user high reliability as well as extreme precision, while its extensive machining capabilities will significantly improve any manufacturing process. One of the many innovative technologies incorporated into the machine is the Machining Navi M-g technology, which computes the most favourable machining parameters for a given job based on an analysis of the acoustic spectrum. The system also levels the vibrations and oscillations that occur at the contact between the tools and the workpiece, resulting in better workpiece surface quality, longer cutting tools life and low load on the main spindle. In addition, despite the most demanding machining operations, the OKUMA GENOS M460R-VE CNC vertical machining center remains very economical ...

Year of construction: 1993 Condition: good (used) Turning diameter over face slide: 530 mm Turning length: 850 mm Turning diameter: 450 mm Spindle bore: 80 mm Motor power: 30,000 W Spindle speed (max.): 3,000 rpm Spindle speed (min.): 10 rpm X-axis travel: 330 mm Z-axis travel: 850 mm Main spindle drive power: 30,000 W Total height: 180 cm Equipment: Documentation/Manual Okuma LB35 II M, OSP 5020LG, tailstock, touch setter, suction, coolant pump 8 bar, chip conveyor, in good condition in relation to age, very little spindle hours and very well maintained. Neff The Okuma Specialist and NeffBuy In addition, we will be happy to provide you with the all-round carefree package, inspection in our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as a briefing and subsequent service. Caa ...

Year of construction: 2009 Condition: good (used) Turning length: 1,000 mm Turning diameter: 650 mm Equipment: Documentation/Manual Okuma LU-45 MC-1000, control OSP P200L, turning length 1000 mm, double turret VDI50, A-turret with driven tools 12 pieces, B-turret 10 tool positions, tailstock, touch setter, gradation for oil mist, door automatic, belt filter system with coolant cooling, tool package Footprint 4800 x 3400 mm Delivery: free loaded truck 100% payment before loading upon invoicing. Neff The Okuma Specialist and NeffBuy In addition, we will be happy to provide you with the all-round carefree package, inspection in our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as a briefing and subsequent service. We operate Okuma CNC service throughout Europe both electronically  ...

Year of construction: 2009 Condition: good (used) Turning diameter over face slide: 580 mm Turning length: 1,000 mm Turning diameter: 360 mm Spindle bore: 80 mm Motor power: 22,000 W Spindle speed (max.): 3,000 rpm Spindle speed (min.): 20 rpm X-axis travel: 260 mm Z-axis travel: 1,000 mm Total weight: 7,500 kg Equipment: Documentation/manual, infinitely variable speed Okuma LB3000 EX MC1000, OSP P200L, Big Bore main spindle, automatic door on the left side, BMT60 turret with 12 driven tool stations (direct drive), NS tailstock, CE declaration of conformity, documentation, chip conveyor, coolant system with 8 bar, German/English documentation Neff The Okuma Specialist and NeffBuy In addition, we will be happy to provide you with the all-round carefree package, inspection in our showroom including demonstration and acceptance, loading, transport, assembly and commissionin ...

OKUMA LB3000EX II CNC turning center was built in 2014 in Japan. This highly technologically advanced machine designed for the most demanding production challenges is distinguished by its extensive machining capabilities, reliable components and extensive equipment. This is what makes the machine ideal for efficient turning, milling, drilling, threading and slotting of workpieces with the highest precision and accuracy. In order to guarantee high dimensional stability and rigidity, an inclined bed is used inside the machine, on which the spindle and turret head are optimally positioned. In addition, special sensors have been placed in the key zones of the bed, spindle and head support, which monitor the current temperature status and actively correct the working travels. This solution helps to ensure proper thermal properties inside the working area. The LB3000 EXII MY C 450 lathe  ...

CNC control, numeric control, CPU rack made of OKUMA LB 10 OKUMA type OPUS 5000 CPU /IF RACK 9A SKU: E7191-292-325-1 Year of construction 1985 Ser. Nr.: 003184 Dimension W x H x D 390 x 345 x 240 mm The device is still installed ready for operation in an OKUMA LB 10. Further components from OKUMA can be found under stock number: 60403, 60404, 60405, 60407, 60408, 60409, 60410, 60411; used

Stock number: 3846 Angetribende Tool Manufacturer: Eppinger , Type: 9.654.088 Year of construction: 0 Specifications: VDI-40 Size Winckel 90 Insert Type ER32 External Cooling Speed max 5000 rpm Motor Power Driven Tools 40Nm Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Stock number: 3848 Angetribende Tool Manufacturer: Eppinger , Type: 4.201.109 Machine NO.: 2 Specifications: Size VDI 40 Winckel 90 Insert Type ER32 Internal Cooling Speed max 5000 rpm Motor Power Driven Tools 70Nm Preci-Flex tool system Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Stock number: 3849 Angetribende Tool Manufacturer: Eppinger , Type: 4.201.109 Machine NO.: 3, Specifications: Size VDI 40 Winckel 90 Insert Type ER32 Internal Cooling Speed max 5000 rpm Motor Power Driven Tools 70Nm Preci-Flex tool system Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Stock number: 3850 Angetribende Tool Manufacturer: Eppinger , Type: 4.201.099 Machine NO.: 5, Specifications: Size VDI 40 Winckel 90 Insert Type ER32 Internal Cooling Speed max 5000 rpm Motor power driven tools 70 Nm Preci-Flex tool system Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Stock number: 3851 Angetribende Tool Manufacturer: WTO, Type: 410520135-40 Machine NO.: 5, Specifications: VDI-40 Size Winckel 90 Insert type ER32 - K19-09608-1.1 Internal Cooling Speed max 6000 rpm Motor power driven tools 63 Nm Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M

Stock number: 3852 Angetribende Tool Manufacturer: Eppinger , Type: 4.200.952 Machine NO.: 7 - 296747-1 Specifications: VDI-40 Size Straight Insert Type ER32 Internal Cooling Motor power driven tools 50 Nm Preci-Flex tool system Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Stock number: 3853 Angetribende Tool Manufacturer: Benz, Type: 114EA04941E6 Machine NO.: 8, Specifications: VDI-40 Size Straight Insert Type ER32 Speed max 4500 rpm Motor power driven tools 50 Nm Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Stock number: 3854 Angetribende Tool Manufacturer: Benz , Type: 114EA04941E6 Machine NO.: 9, Specifications: VDI-40 Size Straight Insert Type ER32 Speed max 4500 rpm Motor power driven tools 50 Nm Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Year of construction: 2015 Condition: very good (used) X-axis travel: 925 mm Y-axis travel: 1,050 mm Z-axis travel: 600 mm Spindle speed (max.): 8,000 revolutions per minute Spindle speed (min.): 25 revolutions per minute Motor power: 2,200 W Total height: 3,525 cm Total length: 4,850 cm Total width: 2,998 cm Workpiece weight (max.): 700 kg Table load: 700 kg Input Current Type: AC Table width: 630 mm Tool length: 400 mm Total weight: 175,000 kg Coolant supply: 70 bar Equipment: Documentation/manual, infinitely variable speed Neff The Okuma Specialist and NeffBuy In addition, we will be happy to provide you with the all-round carefree package, inspection in our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as a briefing and subsequent service. We operate Okuma CNC service throughout Europe bo ...

CNC turret lathe Okuma LB15 at call The OKUMA LB 15 CNC lathe has been professionally serviced regularly since its purchase and is in perfect technical condition. It has a hydraulic chuck with a diameter of 250 mm and a turret holder for 12 tools. The turning spindle rotates at a speed of 70-3800 rpm and has a diameter of 75 mm. Technical specifications of the CNC lathe OKUMA LB-15 – CNC control: OSP 5000L-G CNC system (German) – Data transmission: RS232 – Tool turret: 12-position type BOLT ON – Slain chuck: 250 mm – Spindle: 70-3800 rpm (11 kW, 30 min; 7.5 kW – continuous operation) – non-continuous spindle – Diameter of the spindle bore: fi 75 mm (at a depth of 70 mm, measured from the front of the lathe chuck and without jaws) – Diameter of the spindle bore: fi 28 mm (at a depth of 200 mm, measured from the front of the lathe chuck and without jaw ...

Turning diameter: 580 mm Turning length: 1000 mm Turret positions: 12 CNC Brand: Okuma CNC Model: OSP P 200 L Okuma - Space Turn LB 3000 MY CNC Lathe with C / Y Axis MACH - ID 6346 Make: Okuma Type: Space Turn LB 3000 MY Control: OSP-P200L YOP: 2006 Max. turning Ø    580 mm X-Axis      260 mm Y-Axis       115 mm Z-Axis       1.000 mm Spindle bore        80 mm Speedrange         4200 Rpm Spindle power      30 kW ATC / revolver      12 Speed live tools       6000 Rpm Control       OSP-200 Chip conveyor     Yes Tool eye        Yes Dimensions Length    4.400 mm Width      2.430 mm Height&nbs ...

Turning diameter: 580 mm Turning length: 565 mm Turret positions: 12 CNC Brand: Okuma CNC Model: OSP -P 200 L Okuma - LB 2000 EX CNC Lathe with Sub spil MACH - ID 6345 Make: Okuma Type: LB 2000 EX Control: OSP-P200L YOP: 2006 Max. turning Ø    580 mm X-Axis       260 mm Z-Axis        565 mm Spindle bore       62 mm Speedrange         6000 Rpm Spindle power     20 kW Subspindle speeds       4000 Rpm Subspindle bore           40 mm ATC / revolver             12 Dimensions Length      3.200 mm Width        2.300 mm Height       2.290 mm Weight       3.400 kg

Turning diameter: 300 mm Turning length: 1000 mm Turret positions: 0 Positions ATC: 60   Number controlled axis: 0   CNC Brand: Okuma CNC Model: Loading Robot Make Okuma MACTURN Type MACTURN 30 W Year 1999 Multi tasking mill turn drilling machine Centre height (mm) Swing bed = 300 Center distance (mm) Length = 1.000 Spindle bore ATC 60 positions OKUMA Loading robot Full B axis Full C Axis  

Turning diameter: 0 mm Turning length: 1500 mm Turret positions: 0 Positions ATC: 12   Number controlled axis: 0   CNC Brand: Okuma CNC Model: OSP U 100 L Make Okuma LB300M Type Space Turn LB 300 M Year 1999 Okuma LB 300 M OSP U 100 L Centre height (mm)Swing = 630 Center distance (mm)DBC = 1.500 Spindle boreBore = 60 ATC 12 Vdi live tooling OSP U 100 L Speeds 4500 Rpm Chip conveyor