NILES zstz used machines

max. wheel diameter: 630 mm gear width: 215 mm max. module: 12 min. module: 1 number of teeth: 5 - 140 stroke length max.: 225 mm table diameter: 500 mm table load: 400 kp grinding wheel diam. min/max.: 270-350 mm max.helical angle: 45 ° no. of strokes: 75 - 315 p.M. total power requirement: 8,5 kW weight of the machine ca.: 6,3 t dimensions of the machine ca.: 3,2 x 3,6 x 3,7 m change gears, program control, complete covering, coolant/Filtering attachment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1250 mm gear width: 430 mm max. module: 30 min. module: 2 no. of teeth: 10 - 400 max.helical angle: 45 ° Stößelhublänge: 25 - 450 mm stroke position adjustment: 310 mm Doppelhubzahl - stufenlos: 70 - 190 U/min grinding wheel diam. min/max.: 290 - 400 mm table diameter: 1000 mm table load: 4000 kp dimensions of the machine ca.: 7,7 x 4,5 x 3,3 m total power requirement: 30 kW weight of the machine ca.: 28 t - Complete covering - Oil mist extraction - Coolant system - counter Holder - change Gears - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Niles gear grinding machine is offered. Max. gear diameter: 630mm, gear width: 215mm, module range: 1-12, ram stroke rate range: 75-315 double strokes/min, stroke length: 225mm, number of teeth min./max.: 12/140, min. root diameter: 50mm, max. tip diameter: 630mm, table diameter: 500mm, workpiece dimensions X/Y/Z: 630mm/200mm/700mm, max. workpiece weight: 400kg, min./max. grinding wheel diameter: 250mm/350mm, grinding wheel bore: 127mm, grinding wheel width: 30mm, grinding wheel speed: 1690rpm, weight: approx. 6300kg. Including cabinet with change gears and counter support. Documentation available. Inspection by prior arrangement is possible.

A Niles gear grinding machine is offered. Module range: 2-14, table diameter: 630mm, workpiece dimensions X/Y/Z: 800mm/290mm/1500mm, min./max. generating grinding stroke: 20mm/280mm, ram stroke rate range: 20-280double strokes/min, min./max. number of teeth: 5/360, root diameter: 50mm, max. tip diameter: 800mm, min./max. grinding wheel diameter: 270mm/350mm, grinding wheel bore: 127mm, grinding wheel speed: 2450rpm, weight: approx. 10000kg. Including paper band filter, cabinet with change gears and oil mist extraction unit. Inspection possible by appointment.

Face plate diameter: 1.250mm Center height above foundation slab: 1,250mm Weight: 19t Power: 55Kw Max. torque on the face plate: 31,500Nm Maximum workpiece mass between centres: 16,000 kg Speed range: 2.24 – 224 rpm

Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T

overhauled: 2007 Control Siemens ... Sinumerik 840 D Max. workpiece diameter ... 2500mm Table diameter ... 2240mm Max. workpiece height ... 1250mm Axis Z ... 1000mm Max. workpiece weight ... 10000 kg Main engine power ... 55kW L x W x H 7000x4400x5500mm Machine weight ... 37900kg The machine is in good condition. More info on request.

overhauled: 2007 Control Siemens ... Sinumerik 840 D Max. workpiece diameter ... 2500mm Table diameter ... 2240mm Max. workpiece height ... 1250mm Axis Z ... 1000mm Max. workpiece weight ... 10000 kg Main engine power ... 55kW L x W x H 7000x4400x5500mm Machine weight ... 37900kg The machine is in good condition. More info on request.

overhauled: 2007 Control Siemens ... Sinumerik 840 D Max. workpiece diameter ... 2500mm Table diameter ... 2240mm Max. workpiece height ... 1250mm Axis Z ... 1000mm Max. workpiece weight ... 10000 kg Main engine power ... 55kW L x W x H 7000x4400x5500mm Machine weight ... 37900kg The machine is in good condition. More info on request.

overhauled: 2007 Control Siemens ... Sinumerik 840 D Max. workpiece diameter ... 2500mm Table diameter ... 2240mm Max. workpiece height ... 1250mm Axis Z ... 1000mm Max. workpiece weight ... 10000 kg Main engine power ... 55kW L x W x H 7000x4400x5500mm Machine weight ... 37900kg The machine is in good condition. More info on request.

overhauled: 2007 Control Siemens ... Sinumerik 840 D Max. workpiece diameter ... 2500mm Table diameter ... 2240mm Max. workpiece height ... 1250mm Axis Z ... 1000mm Max. workpiece weight ... 10000 kg Main engine power ... 55kW L x W x H 7000x4400x5500mm Machine weight ... 37900kg The machine is in good condition. More info on request.

overhauled: 2007 Control Siemens ... Sinumerik 840 D Max. workpiece diameter ... 2500mm Table diameter ... 2240mm Max. workpiece height ... 1250mm Axis Z ... 1000mm Max. workpiece weight ... 10000 kg Main engine power ... 55kW L x W x H 7000x4400x5500mm Machine weight ... 37900kg The machine is in good condition. More info on request.

3-jaw chuck, three-jaw chuck WMW DH-B 200x3x6 ( DH-B200x3x6 ) TGL 30-2332 Outer Ø: 200 mm Bolt circle Ø : 133.5 mm Bore Ø: 54 mm Height with jaws: 140 mm used, tested ! Dimensions: 200 x 200 x 121 mm

3- Jaw Chuck WMW NILES DHK 200x3 Outer Ø: 200 mm Flange: 155 mm Bore Ø: 60 mm Bolt circle: 175 mm Height with jaws: 125 mm Chuck number: 507 Dimensions: 200 x 200 x 125 mm

3- Jaw Chuck WMW NILES DHK 200x3 Outer Ø: 200 mm Flange: 155 mm Bore Ø: 60 mm Bolt circle: 175 mm Height with jaws: 125 mm Chuck number: 507 Dimensions: 200 x 200 x 125 mm

turning length: 2500 mm control: Sinumerik 840 D spindle head: A 11 tool numbers: 48 swing diameter over bed slide: 750 mm swing over bed: 780 mm c-axis: 0,1-30 1/min diameter of quill: 160 mm taper bore: MK 5 tool length - max.: 500 mm weight of tools max.: 15 kg weight of the machine ca.: 27 t dimensions of the machine ca.: 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm) The data for this ad was crea ...

turning length: 3.000 mm greates pass round over bed: 810 - 760 mm swing diameter over slide rest: 740 mm control: SIEMENS - 840 C max. turning diameter: 800 mm turning diameter over slide: 740 mm travel -x2 axis: 875 mm travel -z2 axis: 3.700 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MC / 3000 equipped with a well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MC3000 | N40MC The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 1.300 mm spindle diameter: 120 mm spindle bore: 38 mm control: SIEMENS - 840 D numbers of positions in the tool changer: 12 tool taper: VDI 30 CNC Turning- and Milling Center | NILES-SIMMONS - N10 equipped with Y-axis, turret for driven tools, steady rest, and tailstock. The machine is in well-maintained condition. For further technical details, please refer to the attached offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-10 | N 10 | N10/2 | N10-2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 270 mm turning length: 630 mm control: SIN840D swing over bed: 400 mm swing diameter over slide rest: 220 mm longitudinal slide -travel: 745 mm cross slide - travel: 200 mm turning speeds: 10 - 4.000 U/min power capacity at 100 % load: 15,00 kW spindle head DIN 55026 - Size: 6 spindle bore: 62 mm chucking diameter: max. 315 mm feed x-axis: 1 - 12.000 mm/min rapid traverse X-axis: 12,00 m/min Feed z- axis: 1 - 20.000 mm / min. rapid traverse Z-axis: 20,00 m/min tailstock quill taper MT: 3 quill stroke: 112 mm quill pressure: 10,00 kN tool turret with 12 work positions: tool taper DIN 69880: Ø 30 mm Tool drive speed max.: 4.000 1/min total power requirement: 37,00 kW weight of the machine ca.: 4,00 t dimensions of the machine ca.: 4,00 x 2,75 x 2,30 m With SIEMENS SINUMERIK 840D control system, turret with driven tools, C-Axis, tailstock, chip conveyor, various tool hol ...

turning length: 4.500 mm greates pass round over bed: 810 - 760 mm swing diameter over slide rest: 740 mm control: SIEMENS - 840 C max. turning diameter: 800 mm turning diameter over slide: 740 mm travel -x2 axis: 875 mm travel -z2 axis: 5.200 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MCT 4500 equipped with a turret for driven tools as well as NC steady rest and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MCT4500 | N40MCT The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 200 mm -Weight: 18 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Short cone mount for: bayonet disc attachment -Cone size: 6 -Cone: Ø 106 mm -Bolt circle: Ø 133.4 mm -Through hole: Ø 54 mm -Weight: 15 kg

three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Cone: Short cone 8 Ø 139 mm -Bolt circle: Ø 170 mm -Through hole: Ø 80 mm -Weight: 24 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Feed size: Ø 200 m -Through hole: Ø 54 mm -Weight: 12 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH: B200x3x6 -TGL: 30-2332 -Chuck size: Ø 200 mm -Cone: Ø 104 mm -Hole circle: Ø 132 mm -Through hole: Ø 54 mm -Weight: 15 kg