NELA g2 used machines

video control station The VCPevo / VCP Evolution (often written “VCPevolution”) is a fully automatic register punching & bending system for printing plates (offset printing) built by NELA. “VCP” stands for: Video‐recognition of register marks (V) + Controlling via CCD image processing (C) + Positioning by stepping motor control (P) — as one brochure puts it. The machine is used in the pre‐press / printing-plate automation sector: it aligns exposed printing plates, punches the register holes, bends the plates (to the correct angle) in one cycle. The VCPevolution line is described as the “new generation” of the VCP series, aimed at high precision, high throughput, integration into automation / plate sorting lines. According to NELA’s product page for VCP, the machine is “available in different models and can easily be integrated into any automation solution.”  ...

Plate punch HD/Nela SM 52; good condition; cleaned and tested; Table equipment; Punching 425mm Autoplate. Plate punch HD/Nela SM 52; good condition; cleaned and checked; table top machine; punch size 425mm autoplate.

Printing plate bending HD/Nela SM 102 B; suitable for Heidelberg Speedmaster SM 52-102; max. Plate length 811mm. Plate bender HD/Nela SM 102 B; used for Heidelberg Speedmaster 52-102: max. plate lenght 811mm.

Printing plate bending HD/Nela SM 102 B; suitable for Heidelberg Speedmaster SM 52-102; max. Plate length 811mm. Plate bender HD/Nela SM 102 B; used for Heidelberg Speedmaster 52-102: max. plate lenght 811mm.

Plate bend Ingkant SM 52; cleaned and tested; Table equipment; suitable for Heidelberg SM 52 plates. Plate bender SM 52; good condition; cleaned and checked; table top model; used for Heidelberg SM 52 plates.

Printing plate punch/lacquer plate punch for Heidelberg XL 145/162; good condition; cleaned and tested, perforation 1200mm autoplate. Plate punch/ plate punch for varnish plates for Heidelberg XL145/162; good condition; cleaned and checked; hole size 1200mm autoplate.

M. No.: 3839/11

M. No.: 3839/11

M. No.: 5927/37

M. No.: 6513/19

M. No.: 5301/04

Give. Angular handpiece with collet for key tension, wear-resistant cast housing, ball bearing, bevel gear, grease lubricated. Equipped with 6mm collet

Güldner 2-6L79,G20-50 Zylinderkopf kpl.mit Ventilen im Austausch ab Lager lieferbar. Preise per Stück,zuzügl.gesetzl.Steuer,Preisänderungen vorbehalten. info@miw-zeven.de

Cylinder head complete with valves in exchange info@miw-zeven.de

One used AEG Kanis G 20 back pressure steam turbine from 1985 in good running condition.  The steam inlet pressure of 14 bar can be increased up to 20 bar. Alternators with other voltages are also available on request. For Sale type: AEG-Kanis G20 el. power: 2046 KW generator end: AEG 2650 KVA, 5250 Volts, 50 Hz, cos phi 0,8 steam consumption: 40 to/h at full load steam inlet pressure: 14 bar (up to 20 bar possible) back pressure: 4,5 bar inlet steam temperature: 320 °C gear ratio: 8,04 manufactured: 1985 mesurements: 8,30 L * 3,00 H * 4,2 W price on request: Here you can download all the turbine pictures (30 MB):  abc.stromerzeuger-discount.de/AEG-Kanis_G20_back_pressure_2046_kw_stea m_turbine_14_bar/all_pictures.zip Here you can download the scope of supply      (13 MB):  abc.stromerzeuger-discount ...

Manufacturer: Trane Type: CRHR400 G2HBO Type: Compressor Technical data: Volume flow 145.3 m3/h compressor end pressure 28 bar speed 145 0 1/9p Voltage: 380/415 V 3PH 100/92 A 50 Hz New price EUR 11,043 Condition: new; ready for use

Manufacturer: GARDNER DENVER #3289 Type: G200 2 BH 1900 -7AH17 Electric power: 12.5 kW RPM: 2920/minute at 50Hz Pmin: 280 mbar

Engine Brand: MTU, Conditie: NEW, , https://www.hamofa.com/stock/diesel-engines/mtu-8v1600-g20f-new/261, , = More information =, , Type: Engine, Type number: 8V1600 G20F

TWO-COMPONENT DOSING AND MIXING SYSTEM Little used. Only in the development department, no series production. The new price of the system was over 20,000 euros plus VAT. Facility details: - Total power requirement: 3.0 kW - Basic housing G22 for 30/60 L container - Base frame with drip tray, protective frame, crane eyelet, motor mount, compressed air filter regulator, pressure gauge, quick couplings and control cabinet, mounted with fixed and swivel castors - 2x dosing pump drive 0.55 kW incl. frequency converter and pump carrier = 1x dosing pump KF0/4; 1x Dosing pump FP/S14-N19; 1x Tank VA 60L, Tank Agitator 0.18kW (A-Comp.) - Respiratory dryer - Recirculation - Hoses - Mixing head GP 23 static/D low dead space - 2009 model with separately pneumatically controlled fluid valves - Air purge valve autom. Handle with E-switch - 4 solenoid valves 5/2-way - Static mixer - I ...

RMH G 25 New Manufacturer: RMH Roller cutting width: 1200mm Roller cutting height: 1300mm Dimensions ( L x W x H ): 2200 x 1300 x 2500 mm Drive: 11 KW Manual working procedure Two-handed operating system Cutting force: 25 tons (1x cylinder) Total weight: 3600kg

Kubota RCK 48-G23 intermediate axle mower to Kubota G23, rear ejection, without knife, functional. Further intermediate axle mowers for various Kubota mopdelle in stock.

geared motor, electric motor -Speed: 36.5 rpm -Power: 0.75 kW -Design: B5 -Shaft diameter: Ø 30 mm -Brake: 24 V -Protection class: IP 65 -Weight: 36 kg

CATALOG NUMBER 6679 TECHNICAL DATA - max width of the workpiece 250mm - max height of the workpiece 170mm 6 spindles: 1) horizontal lower 250mm 5.5kW 2) vertical right 170mm 5.5kW 3) vertical left 170mm 5.5kW 4) horizontal, upper 250mm 7.5kW 5) horizontal lower 250mm 7.5kW 6) universal 250mm, adjustable at an angle of 360 ° 5.5kW - 6 electrically adjustable spindle up / down - all adjustable spindles up / down, right / left - diameter of the spindles 40mm - 6 introductory pulling rollers, toothed, including 2 double ones - 6 rollers leading out, pulling, rubber, smooth, including 2 double - 2 clamps from above - from the bottom, a roller introducing toothed, pulling, torsion in the table before the first spindle - at the bottom, 2 pulling rollers, metal, smooth - 4 side clamps at the bottom - feed on cardan shafts - pneumatically pressed rollers - smooth regulati ...

Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 180 mm -Number: 2 milling cutters Price: complete -Weight: 7.5 kg

Manufacturer: ELMO RIETSCHLE / Garden Denver Type: G200 2BH1900 Overall size: 500 x 600 x 1100 mm Connecting pipe stub: DN100 Pmin: 280 mbar RPM: 2920/min Electrical data: 50 Hz; 380 V; 12,5 kW; 28 A