used MUBEA hiw

5-way combined iron worker with notching device and hole punchMake MUBEA type HIW 550/510Machine -No: 0171793397130 built in 1993Technical specifications:Flat steel scissors: 350 x 13 mmAngle steel scissors L-steel 90 °: 140 x 13 mmL-steel 45 °: 70 x 7 mmSteel bar scissors round / square: 45/42 mmNotching device: 10 mmHole punch punching force: 55 tProjection: 510 mmpunches: 30 in 16 mmStroke of the punch stepless: 0 - 60 mmNumber of strokes of the punch with 20 mm travel: 42 strokes / minDrive power: 5.5 kWWeight about 1500 kgWith- support tables- various accessoriesused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

5-fold combined profile steel shears with notching device and hole punchMake MUBEA type HIW 550/510Machine -No: HIW550/510/94 built in 1999Technical specifications:Flat steel scissors: 350 x 13 mmAngle steel shears L-steel 90°: 140 x 13 mmL-steel 45°: 70 x 7 mmSteel bar shears round/ square: 45 / 42 mmNotch: 10 mmPunching force: 55 tProjection: 510 mmpunches: 30 in 16 mmInfinitely variable punch stroke: 0 - 60 mmNumber of strokes of the punch at 20 mm path: 42 strokes / minDrive power: 5.5 kWWeight approx.: 1600 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Punching force: 550 kN (punches e.g. 30 m in 16 mm material), with search device via foot switch for graining Projection: 550 mm Cuts 350 x 13 mm or 230 mm on the flat steel shears Two separate foot switches for the punching and shearing sides, so that punching and shearing can be carried out independently Assortment of tools is included in the price

Offer 23294 Specifications: - Flat steel shears - knife length 470 mm - for flat material 450 x 15 mm - or 300 x 20 mm - Sectional steel shears - L- steel at 90° 140 x 13 mm - at 45° 70 x 7 mm - T-steel at 90° 70 mm - Bar steel shears - round steel 50 mm - Square steel 42 mm - Notching device - rectangular notching 52 x 90 x 12 mm - Punch punch - punching force approx. 750 KN - - Infinitely variable stroke 0 - 70 mm - Perforates in steel up to 30 mm Ø in 20 mm - Projection 310 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1600 x H 1850 x D 1400 mm - Weight approx. 2400 kg - With: - 2 E. foot switches for two separate workstations - Slewing ring

Punching force: 1000 kN (punches e.g. 40 mm in 22 mm material), with search device via foot switch for punching Projection: 340 mm Cuts 400 x 20 mm or 500 x 15 mm on flat steel shears Support table with stop on the punching side Two separate foot switches for the punching and shearing side, so that independent punching and shearing can be carried out Assortment of tools is included in the price

Punching force: 750 kN (punches e.g. 30 mm in 22 mm material), with search device via foot switch for punching Projection: 320 mm Cuts 450 x 15 mm or 300 x 20 mm on flat steel shears Support table on the punching side Two separate foot switches for the punching and shearing side, so that independent punching and shearing can be carried out Assortment of tools is included in the price

Punching force: 750 kN (punches e.g. 30 mm in 22 mm material), with search device via foot switch for punching Projection: 320 mm Cuts 450 x 15 mm or 300 x 20 mm on flat steel shears Support table on the punching side Two separate foot switches for the punching and shearing side, so that independent punching and shearing can be carried out Assortment of tools is included in the price

Hydr. 4-fold combined profile steel shears make MUBEA type KLSH 550Make -No: 0155682757250Technical specifications:Capacity of the flat steel shears: 200 x 20 / 400 x 16mmCutting length: 400 mmPerformance of the profile steel shears:L-steel: 120 x 13 mmor: 130 x 90 x 12 mmRound bar: 35 mmSquare steel: 32 mmU steel: U 160Hole punch performancePressure capacity: 50 tStroke:50mmpunches :30 in 15 / 28 in 16 mmProjection: 320 mmPerformance of the release devicetriangle notcher:L + T - iron: 75 x 8Notch depth: 80mmLatch width: 40 mmGeneral data of the machineDrive power: 7.5 kWDimensions L x W x H: 1160 x 550 x 1840 mmWeight approx.: 1.1 tused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for yo ...

Hand lever shears, hand tin snips, tin snips, sheet metal snips -Scissors: 180 x 4 mm -Dimensions: 800/400/H900 mm -Weight: 60 kg

Sheet metal width - 170 mm, Sheet thickness 8 mm. 80 x 10 mm, flat steel Steel bar cutting stencils for round and square Knife length 170 mm. Sheet holding device Machine length 800 mm (1000 mm with moveable base) Machine height 500 mm plus 560 mm for base Machine weight 255 kg,. on mobile base

Max. working diameter round/ square/ flat: 30/ 28/ 30mm, length: 550mm, width: 1050mm, height: 1750mm, weight: 700kg.

Reinforced steel scissors Round iron scissors Scissors Manufacturers Muhr and Bender Type 50N/22 and 50N/28 50N/22 intersects at 450N/mm2: Round: 22mm Square 22mm Flat: 35x10mm 50N/28 intersects at 450N/mm2: Round: 28mm Square 24mm Flat: 40x15mm Both machines new and ovp Special price

Max punching force: 750 kN stroke over foot switch With range of tools as desired

Max punching force: 1100 kN Extension: 510 mm Large support table with material flaps on the punchside Electric contact load stop for heare hydraulic holder for profile and flat steel shears with a wide range of tools ; Very good

Combined cut-out machine and sheet metal scissors with base ; Very good

The mubea and Peddinghaus tools pictured are not sold completely. You can tell us what stamps and dies you need, so that we put together an individual assortment for you.

Bearing number: 3488 Profile steel shears Manufacturer: Mubea, Type: KBLH 500 Machines NR.: 0156085927332, Year of construction: 0 Specifications: Size Printl 50 To Max punching dia 30 x 15 mm mm Stroke length 0-60 mm Number of strokes per min. 16 Extension 410 mm Flat steel 180 x 20 - 400 x 10 mm Angular steel 50 mm Round steel 55 mm Total power 7.5 kW Hydraulic. Length: 1400 mm, Height: 1800 mm, Width: 800 mm, Weight: 1800 kg

+++ ATTENTION - PRICE DROP!!! +++ Prices are rising, ours are falling!!! +++ Our prices are reduced by 50% now, +++ due to warehouse restructuring!!! +++ Also, consider taking a look at our other offers in stock. Sheet Metal- & Profile Steel Shear Mubea KBL 11 with notcher and punching press manufacturer: Mubea type: KBL 11 mach.-Nr.: 107/3019/7 year of construction: ??? comm.-Nr.: 0250/125/200/0575 stock-Nr.: 1911 +++ Regular Price: 2.750,- € > Reduced Price: 1.375,- € BN +++ All prices are shown without taxes (net price) Technical Data (According to manufacturer) Flat Steel Shear blade length: 220 mm sheet metal up to: 11 mm flat steel up to: 125 x 13 mm Profile Steel Shear angle irons up to: 80 x 9 mm T-iron up to: 80 x 9 mm U- and I-iron up to: NP 10 hubs: ca. 55 / min. Steel Bar Shear steel bars up to: 35 mm square steel up ...

DATA ON THE MACHINE Machine type: Profile steel shears / unclinking machine Manufacturer: MUBEA Muhr u. Bender Model: BF11N Condition: used Price: 1,450 Euro net plus VAT Location Warstein , Germany Reference M-MUB-1220 Description We offer you a used profile steel shear from the manufacturer MUBEA Power 32t Weight approx. 1t Our offer is aimed at professionals who are covered in accordance with section 14 GewO in accordance with the trade order. The offer is subject to change, intermediate sale reserved. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are reserved!

sheet width - max.: 80 x 12 mm plate thickness: 8,0 mm weight of the machine ca.: 135 Kg dimensions of the machine ca.: 1,20 x 0,50 x 1,75 m - Serial-no.: 305-11.06 - fixed on rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 400 mm plate thickness: 4 mm weight of the machine ca.: 0.3 t dimensions of the machine ca.: 0.5x1x2.2 m www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 400 mm plate thickness: 4 mm total power requirement: x kW weight of the machine ca.: 0.2 t dimensions of the machine ca.: 0.7x1x2 m www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 170 mm plate thickness: 0 mm number of rolls: 0 weight of the machine ca.: 0,1 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - Hole diameter approx. 44 , 45 , 48 , 52 , 2 x 55 , 2 x 58 , 61 , 66 mm 2 x 68 , 2 x 80 , 81 , 85 mm - Long hole dimension approx. 12 x 42 , 12 x 50 , 18 x 55 mm - Stamp holder 58 mm - Stamp height 54 + 58 mm - Adapter ring for stamps - Die height 30 + 40 mm - Die outer diameter 90 + 140 mm - Adapter ring for matrices 90 - 140 mm - Weight approx. 90 kg

Combination machine Manufacturer Mubea Type KBL100 5-fold combined Flat steel shears 150x19mm Profile steel shears e.B angle iron 160x7mm or 100x12mm Bar steel shear 70mm round Hole punching Jack 16mm All information to the best of our knowledge, but without guarantee!