We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
I sell a 3-axis CNC machining center SCM Morbidelli Author A630S with truss table Year of construction 2004. Configuration: 3-axis main spindle SCM 6.6kW 24,000 rpm Tool magazines 2 x 6 positions ISO30 on the head Second 3-axis main spindle SCM 6.6kW 24,000 rpm Second tool magazine 6 positions ISO30 on the head 1x groove saw X-direction Drill head 12+4+4 drilling spindle fully equipped Usable work surface 3050x1370 x Z 180mm. 2 work surfaces, 4 clamping zones Automatic system of Central Lubrikazion Pump Gardner Denver 215/260 m3/h. Xilog Plus new software with operating instructions. Very good condition. Available the same.
used
Manufacturer: Morbidelli, Type: Author 600, Year: 1999, Control: Num 1040/X-Log, Work piece width min-max mm: 1680, Min.-max. workpiece length in mm: 4400, Min.-max. workpiece height in mm: 10-80, Working range X: 4829, Working range Y-axis: 1774, Working range Z: 180(280), C axis: yes, Number of milling spindles: 1, Tool adaption system: ISO, Milling engine 1 hours power: 7,5, Number of tool changers: 2, Number of tools per tool-magazine: 4 + 8, Mitfahrender Werkzeugwechsler: yes, Vertical drills-X: 12, Drill vertical Y: 6, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, 4 station allocation: 4, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: ca.60, Saw unit: schwenkbar, Radial arm machine: yes, Year :1999
used
Manufacturer: Morbidelli, Type: Author 600, Year: 1999, Feeding speed max m/min: 50, Working range X: 3000, Working range Y-axis: 915, C axis: yes, Number of milling spindles vertical: 1, Tool adaption system: ISO 30, Milling engine 1 hours power: 7,5, U/min 1) Vertikal: 1500 - 1800, Number of tool changers: 1, Number of tools per tool-magazine: 10, Vertical drills-X: 18, Horizontal drills-X: 6, Traverse table: yes, Vacuum pumps m³/h: 100, Year :1999
used
Manufacturer: Morbidelli, Type: Author 600, Year: 2000, Working range X: 4400, Working range Y-axis: 1300, Number of milling spindles: 2, Tool adaption system: ISO 30, Milling engine 1 hours power: 10 PS, Milling engine 2 hours power: 9 PS, Number of tool magazines: 1, Number of tools per tool-magazine: 10, Horizontal drills-X: 6, Traverse table: yes, Vacuum pumps Qty: 1, Vacuum pumps m³/h: 100, Drill vertical: 18, Radial arm machine: yes, Year :2000
used
X-travel: 3660mm, y-travel: 1250mm, z-travel: 180mm, length: 5300mm, width: 2200mm, height: 2500mm, weight: 4.3t.
used
X-travel: 3665mm, y-travel: 1250mm, z-travel: 200mm, max. plate thickness: 120mm, weight: 4t.
used
Processing field 3200 x 1300 4 axle machine
used
- Work surface 3050 x 1360 mm - Machining height 180 mm - Electrospindle 10 HP ISO 30 rapid 8 - 6 position tool tray - saw diameter 150 mm 0-90 ° - 18 independent vertical spindles - 4 opposite horizontal spindles in Y - 2 opposing horizontal spindles in X - 6 working beams with 18 suction cups - Xilog management - 100 mc/h vacuum pump - Safety system with bumpers - CE standards - fully functional 7 -regular service
used
Key data: 900 mm, 2600 mm, 80 mm
Model Author 503, 3 axis machine, x = 900 y = 2600 Z = 80, with groove saw, 1 x milling, T dowel drilling 18 + 3 on the front side, 2 + 2 from the back and front 1 x, year of manufacture 95
used
4 axes machining dimension max Y1650 mm - X4600 mm Machining in height Z180 mm 14 position tool magazine 8 SCHMALZ brackets the machine is plugged in, testing is possible
used
Description: Serial number AL1950 Documents: use and maintenance manual, programming diskette Approx. Onsite Dimension. (l x w x h): 4,000 x 2,000 x 2,000 mm, weight approx.: 2,500 kg
used
Description: • CNC machining centre (3-axis) • Serial number AL5632 • Total installed power 20 KW • Working area approx. 2600 x 1150 mm • Panel passage height 180 mm • Travelling way X-axis: approx. 3000 mm, Y-axis: 1465 mm, Z-axis: 280 mm • Maximum travel speed in the axes direction x-y-z: 50-40-22.50 m/min • Tool magazine with 10 positions (some elastic nippers are broken) • Electro spindle SCM ISO-30-LD: power 6.60 KW, automatic tool change, for ISO 30 tool holder • Vertical milling group 6.60 KW-max. 12000 rpm, manual tool change • Saw unit to groove in X direction • Vertical drilling spindles in X-axis direction: 9 • Vertical drilling spindles in Y-axis direction: 7 • Horizontal drilling spindles in X-axis direction: 2 + 2 • Automatic lubrication • Remote control panel • 8 consoles with 22 vacuum suction cups total • 4 lifting modules for heavy wo ...
used
Description: • CNC machining centre • Serial number AL5132 • Total installed power 20 KW • Useful working area approx. 2700 x 1000 mm • Maximum travel speed in the axes direction x-y-z: 50-45-22.50 m/min • , 2 x vertical milling unit with manual tool change • Saw unit to groove • Vertical drilling spindles in X-axis direction: 6 • Vertical drilling spindles in Y-axis direction: 5 • Horizontal drilling spindles in X-axis direction: 1 + 1 • Horizontal drilling spindles in Y-axis direction: 1 + 1 • NUM numerical control • Remote control panel • 6 consoles with 2 vacuum suction cups each • BECKER KVT 3.100 vacuum pump with capacity 100 m³/h Approx. Onsite Dimension. (l x w x h): 5,500 x 2,800 x 2,500 mm, weight approx.: 2,900 kg
used
CATALOG NUMBER 6059 TECHNICAL DATA - number of horizontal spindles 2 × 20 pieces - number of vertical spindles 1 × 20 pieces - spacing of extreme spindles 610mm - spacing between spindles 32mm - stroke of the feed cylinder 60mm - max. length of the workpiece: 3400 mm - adjustment of horizontal spindles up / down, front / back - right / left adjustment of vertical spindles - possibility of working on each drilling apparatus separately - right drill - left, threaded (screwed) - 3 pneumatic clamps - engine power 4 × 1.85 kW - air demand 6-8 bar - dimensions length / width / height 4600x1180x2200mm - weight about 1500 kg Net price: PLN 18 900 Net price: 4345 euros depending on the price, 4.35 euros (Prices may vary with higher fluctuations)
CATALOG NUMBER 6059 TECHNICAL DATA - number of horizontal spindles 2 × 20 pieces - number of vertical spindles 1 × 20 pieces - spacing of extreme spindles 610mm - spacing between spindles 32mm - stroke of the feed cylinder 60mm - max. length of the workpiece: 3400 mm - adjustment of horizontal spindles up / down, front / back - right / left adjustment of vertical spindles - possibility of working on each drilling apparatus separately - right drill - left, threaded (screwed) - 3 pneumatic clamps - engine power 4 × 1.85 kW - air demand 6-8 bar - dimensions length / width / height 4600x1180x2200mm - weight about 1500 kg Net price: PLN 18 900 Net price: 4345 euros depending on the price, 4.35 euros (Prices may vary with higher fluctuations)
used
SCM MORBIDELLI CX100 High-performance compact vertical machining center for drilling wood boards such as chipboard, lacquered board, MDF, extremely suitable for installation in smaller rooms. Safe and reliable, thanks to the upper clamping unit that provides adhesion to the lower reference, ideal for both flexible and series production. Windows operating system. CAD/CAM software for programming and designing any production processes. Automatic detection of piece dimensions and barcode scanner for greater efficiency and production speed. Specifications; Max. workpiece dimensions: 3050 mm x 900 mm x 60 mm Min. workpiece dimensions: 200 mm x 70 mm x 10 mm X and Y axis speed: 40 - 40 m/min Number of vertical drills: 12 (7+5) Number of horizontal drills along the X-axis: 4 Number of horizontal drills along the Y-axis: 2 Electrospindle milling machine: 5.5 kW - 18000 rpm ...
used
Working area: 2890mm x 900mm x 80mm, axis working paths: X/Y/Z: 3270mm/1200mm/115mm, max. vector axis speed: 75mm/min. Spindle speed: 1200-18000rpm, max. panel thickness: 80mm, control: TRIA 7500. Dimensions X/Y/Z: 4400mm x 2865mm x 2350 mm, weight: 3000 kg. Defects: Screen, ball bearing of the Z-axis.
used
Manufacturer: Morbidelli, Type: 503, Year: 1998, Control: Tria 7000, Feeding speed max m/min: 75, Working range X: 3200, Working range Y-axis: 1050, Working range Z: 80, C axis: yes, Number of milling spindles: 1, Tool adaption system: ISO 30, Milling engine 1 hours power: 7,5, rpm 1): 18000, Number of tool changers: 1, Number of tools per tool-magazine: 8, Vertical drills-X: 11, Drill vertical Y: 7, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, 4 station allocation: yes, Stops in the table front: yes, Stops in the table rear: 4, Vacuum pumps m³/h: 120, Tool clamping system: ISO 30, Saw unit: Starr in X Richtung, Radial arm machine: yes, Year :1998
used
Manufacturer: Morbidelli, Type: U 50, Year: 1991, Control: Morbielli, Feeding speed max m/min: 200, Working range X: 3590 , Working range Y-axis: 1800, Working range Z: 55, Milling engine 1 hours power: 5 - 7,5 PS, rpm 1): max 18.000, Vertical drills-X: 14, Drill vertical Y: 16, Horizontal drills-X: 2, Drill horizontal Y: 2, Traverse table: yes, Year :1991
used
Manufacturer: Morbidelli, Type: U 50, Year: 1991, Control: Num, Min.-max. workpiece length in mm: 150-3150, Min.-max. workpiece height in mm: 10-60, Working range X: 3150, Working range Y-axis: 1300, Working range Z: 60, C axis: no, Pendulum processing: yes, Min.-max. workpiece length in mm: 150-3150, Min.-max. workpiece height in mm: 10-60, Number of milling spindles vertical: 2, Tool adaption system: Schnellspansystem, Milling engine 1 hours power: ca.4,4, rpm 1): 12000/18000, Milling engine 2 hours power: ca.4,4, Number of tool changers: keine, Horizontal drills-X: 2, Drill horizontal Y: 2, Traverse table: yes, 2 station allocation: yes, Stops in the table front: 2 reihen, Vacuum pumps m³/h: 100, Saw unit: yes, Portal machine: yes, machine ready for demonstration: yes, Available: sofort, Year :1991
used
Key data: 3050 mm, 1200 mm, 120 mm
Technical version: Console table 3050 x 1200 mm with manually movable 6 brackets, 2 vacuum cups per console and a pneumatic excavation rail Spot laser set-up aid, vacuum pump CNC control XILOG Plus Main spindle 7.5 kW HSK 63F with C-axis, 1500 – 24,000 rpm Tool changer plate 10-fold 1 adapter unit swivel saw Drill head with: 12 vertical spindles, 4+2 horizontal spindles, groove saw Installation dimensions: 6800 x 3040 mm Weight: 2850 kg
used
Horizontal drill head S/R left driven taken from a scm Tech 99 when it was scrapped
used
It functions, works properly, is occasionally used in specialist milling and drilling of furniture. Very simple, trouble-free and graceful equipment. 16 drilling spindles, 2 electrospindles, saw unit, Becker vacuum pump. Trio 6000 control.
used
This MORBIDELLI Universal 3012 TV Universal Machining center was manufactured in the year 2008. It is equipped with a CNC XILOG Plus control unit and has 3 axis.
used
Description: Min. panel length 150 mm Max. panel length 800 mm Min. panel width 230 mm Max. panel width 3200 mm Max. forward feed speed 70 m/min No. Top clamps 4 no. bottom vertical units 6 , motor power 1.3 KW r.p.m. 7000 RPM No. injectors 6+6 No. storage tank 2 Item inserted , wooden dowels , wooden dowels 8/10 mm TOOLS NOT INCLUDED Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg