used MORANDO kn

LATHE MORANDO Manufacturer: ITALY Year of manufacture: 1970 Swing over bed 1200mm Turning length: 8 000mm

Table diameter 1450mm Maximum working diameter 1600mm Maximum height under the crossbar 1000mm Two balanced RAM Quota viewers Machine working in good condition Machine weight 18 ton This morando vertical lathe is in excellent condition and ready to be installed.

Vertical lathe MORANDO 2000 for sale Technical data: - X axis: 1600 mm - Axial travel: 900 mm - Turning diameter: 2100 mm - Maximum turning height: 1350 mm - Platform diameter: 2000 mm - Maximum table load: 21000 kg - Spindle power: 75 Kw - Spindle revolutions/minute: 110 rpm

Vertical lathe MORANDO 3000 for sale Technical data: X axis: 1500 mm Axial travel: 1200 mm Turning diameter: 3100 mm Maximum turning height: 1840 mm Platform diameter: 3000 mm Maximum table load: 47000 kg Spindle power: 52 KW Number of spindle revolutions/minute: 100 rpm CNC: Siemens 840D

Table diameter 1450mm Max working diameter 1600mm Max height under crosstravel 1000mm Nr. 02 RAM Visualization by DRO 4 axes Good working conditions Machine weight18 ton

Table diameter: 1,200 mm Maximum turnerable diameter: 1,350 mm Spindle power: 47.7 Kw Maximum turnable height: 950 mm Table capacity: 6 ton Table rotation speed: 2.22 ÷ 200 rpm Vertical RAM wagon stroke: 1,000 mm Vertical turret wagon stroke: 760 mm Tilt vertical wagons: 35 ° Total weight: 16 ton CNC FAGOR 8055 Year 1979 REVISED IN 2009

turning diameter over bed: 1900 m turning diameter over slide rest: 1370 mm turning length: 8000 mm faceplate: 1650 mm spindle passage: 220 mm turning speeds: 300 U/min steady: 970 mm steady: 680 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1200 mm swing diameter: 1400 mm turning height: 1080 mm workpiece weight: 6000 kg turning speeds: 5-250 U/min swivelling of ram: 35 ° slide adjustment: 760 mm slide adjustment: 1000 mm cross travel: 800 mm main gear-box motor: 40 kW total power requirement: 50 kW weight of the machine ca.: 18 t dimensions of the machine ca.: 3,2x2,8x3,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

* General * SKUR1300 * LocationBarneveld * MakeL.A. Wolf Spezialmaschinen GmbH (D) * TypeMK 2/100 * Year of construction1989 * Main Features * MaterialStainless steel * Volume100 Ltr. * Motor7.5 KW * Inlet diameter250 mm * Specified Features - Kneader * Paddle mixercheck * Double shaftcheck * Useful capacity100 ltr * Trough sizes700x600x500mm * With covercheck * Inletdia. 250mm * Outletdia 150mm * With jacketcheck * With adjustable packing glandscheck * Motor7,5 kW 380 Volt * Kneaders * Jacketcheck * Inletdia. 250mm * Bottom outletdia. 150mm * Capacity100 ltr. * Double shaft kneadercheck * Trough sizes700x600x500mm * With adjustable packing glandscheck * With covercheck * Motor7,5 kW 380 Volt * MaterialStainless steel * Information * With switchcheck * Floorspace1,5x1,4 M * Floor space1,5x1,4 M * Total height1,7 M * Weight1500 KgKneadersL.A. Wolf SpezialmaschinenKneaders > KneadersBrand  ...

With Siemens touch display control

Data processing!

Belt conveyors Horstmann; L1: 4,800; L2: 2,250 / 40 °; Working width: 1.450 mm; good condition. Cain belt tape model Horstmann: L1 4,800; L2: 2,250 / 40 °; work width: 1. 450mm; good condition. Contact at: rerec@web.de or mobile: 0049 160 96232593

For heavy or tähe products, Trough size 840 x 520 x 450mm deep, Full capacity 160L, usable capacity approx. 100-120kg per product, Stainless steel clad, double-walled for heating/cooling, Mixed elements of normal steel, side walls of normal steel, with stainless steel lid with counterweights and limit switch, converted to pneumatic tilting, with control cabinet, and built-in timer: 1 to 7 minutes. Dimensions: 2.2 x 1.2 x 1.4m high (with control cabinet 1.9m high) Weight approx. 1.200kg

Kemper Long Knitter - L analog control with flour spreader Spreader adjustable Speed treadmill adjustable Height of the bands adjustable with CE plug for linking to bread system No separate power connection required on rolls Metrics: Height: 170cm Width: 200cm Depth: 90cm

Assembled Knife Holder for CPM 7930 Model 30-4 Knives included

Mitteltrennschnitteinrichtung - 4th and 5th knife attachment for Trimmer Mueller Martini 4th-5th knife Year 1999 - Serial-No. DSS 2609 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

* General * SKU033E083 * LocationBarneveld * MakeWerner und Pfleiderer * No.87170 * Main Features * MaterialStainless steel * Volume0.5 Ltr. * Motor2.2 KW * Specified Features - Kneader * MaterialStainless steel * Jacketcheck * Capacity0,5Ltr. * Double shaft kneader(1x) * Single gearedcheck * Trough sizes140x90x100mm * With adjustable packing glandscheck * With covercheck * With manual operated tiltingcheck * Motor1,6x2,2Kw.380Volt, flameproof * Information * With switchcheck * Floorspace1,2x0,6M * Total height1,5M * Extra SpecificationsStamp KneadersWerner & PfleidererKneaders > KneadersBrand > Werner & Pfleiderer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machi ...

* General * SKU082Z322 * LocationBarneveld * MakeWerner & Pfleiderer, Stuttgart * TypeUK-14 X/AU * No.154 576 * Year of constructionunknown * Pressure * Working pressure6 Bar * Main Features * MaterialMild steel * Volume200 Ltr. * Motor17.5 KW * Specified Features - Kneader * Jacketcheck * Max. temperature220 Degr. C. * Screw speed20/40 Rpm * Arm speed27/20 Rpm (front/back) * Capacity250 Ltr, Useful 200 Ltr * Double shaft kneaderMixtruder (1x) * Masticator-armscheck * Trough sizes740x685mm * With covercheck * With screw dischargecheck * Motor30,0 KW, 380 Volt * Motor11,0/17,5 KW, 380 Volt * MaterialMild steel * Information * With switchgear(Dim. 80x40x180 CM) * Floorspacekneader 2,8x1,4 M * Total height1,6 M * Weight3200 KG * Extra Specifications- Dimensions drive unit 1,4x1,0x1,7 M (LxWxH), weight 2130 KG * Technical specs * Extra informationtest pressure is achieved at 220 Degr. C.Knea ...

* General * SKU164H746 * LocationBarneveld * MakeJ.Borgonien * Main Features * MaterialStainless steel * Volume30 Ltr. * Motor0.55 KW * Specified Features - Kneader * MaterialStainless steel * Jacketcheck * Capacity30Ltr. * Single shaft kneader(1x) * Trough sizes375x280x340mm * With adjustable packing glandscheck * With manual operated tiltingcheck * Motor0,55Kw.220/380Volt * Information * Mounted on framecheck * Mounted on wheelscheck * With switchcheck * Floorspace0,9x0,5M * Total height1,M * Weight250KgKneadersBorgonienKneaders > KneadersBrand > Borgonien What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

* General * SKU075B496 * LocationBarneveld * MakeAML Advance Mixing LTD Stroud * No.7134 * Year of construction1999 * Main Features * MaterialStainless steel * Motor4 KW * Inlet diameter400 mm * Specified Features - Kneader * Single screw cont. kneaderContinuous dough preparation line (1x) * AC-motor4,0 KW, 380/415 Volt * With variable speed drive4,0 KW, 380/415 Volt * Feeding with hopper(Capacity 600 KG) * Capacity200-300 KG p/Hr * With variable speed drivecheck * MaterialStainless steel 1.4301 (304) * Information * Mounted on framecheck * With switchgearcheck * Floorspace3,0x2,4 M * Total height5,6 MKneadersAML StroudKneaders > KneadersBrand > AML Stroud What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please ...

* General * SKU186K643 * LocationBarneveld * MakeWerner und Pfleiderer * TypeLDUK 6 - IInS * No.111045 * Year of construction1962 * Pressure * Working pressure10 Bar * Main Features * MaterialMild steel * Volume18 Ltr. * Motor7.5 KW * Specified Features - Kneader * Jacketcheck * With variable speed drivecheck * Arm speed21,6-97,2/28,2-127 Rpm * Capacity18 Ltr. (usefull 8 Ltr.) * Double shaft kneaderdispersion kneader (1x) * Masticator-armscheck * Single gearedcheck * With adjustable packing glandscheck * With covercheck * Motor7,5 KW * MaterialMild steel * Information * Extra SpecificationsPneumatic tilting, With top ram (pneumatic), Mounted on frame, With switch, Floorspace 1,8x1,4 M, Total height 2,0 M. KneadersWerner & PfleidererKneaders > KneadersBrand > Werner & Pfleiderer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Rea ...

* General * SKU090A440 * LocationBarneveld * MakeThe Mickle Laboratory Engineering Co. * No.089-81 * Specified Features - Kneader * With covercheck * Motor(220 Volt, 1 Ph) * Information * With switchcheck * Floorspace0,5x0,5 M * Total height0,6 M * Weight60 KGKneadersMickle LaboratoKneaders > KneadersBrand > Mickle Laborato What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

-Sale by owner AT THE CAMP ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobile: +43-664-3358378 office@machines-plants.at www.machines-plants.at for fully automatic packaging of block and bricks in Special design for stacking and setting up concrete elements Drive: Electro-hydraulic, wheels of the clamfore truck made of Vulkollan Stacking device: All-wheel steering with + 90 0 steering impact from straight line. Control: PLC from Siemens The respective stowage inserts are detected by light barriers Hydraulic: Gear constant pump, ultra-fine filter in high-pressure circuit, return filtering Front and rear wheels can be steered separately or separately. Maximum stacking height of the forklift 1,250 mm Special gripper clamp, in which a complete stoare is held and can be handled, a set of gripping jaws for hold ...

The Klingelnberg KNC 60 bevel gear milling machine was developed as a universal machine for the production of bevel gears in the field of agricultural machinery, construction machinery, wind power gearboxes, machine tools, mining technology, aircraft, textile machines, etc. It can be used for individual production, small series production as well as for mass production. Figure shows KNC 60 in the actual state, can be used as a used machine or as a CNC conversion, completely modernized, designed for highest performance and accuracy with flexible production, acceptance according to DIN and manufacturer standard, control SINUMERIK 840 D SL; digital drive technology SINAMICS. Technical data Klingelnberg KNC 60 CNC Wheel diameter - max 650 mm Largest tooth width 120 mm Module 2.2-12 mm Number of teeth 5-120 Hypoid offset +/- 100 mm Applicable knife head radii 55, 100, 135, 170, 2 ...

1 x Buss PR200? Ko-Kneader, supplied fully refurbished by Buss in 1995, G130 gearbox, 11 L/D ratio, with 340kW dc motor and controls. Including oil heater and TCU 2t/hr output. Spare screw and barrel segments.