MONDIALE hbm used machines

spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1700 mm Control: Fanuc spindle taper ISO: 50 z-travel: 1400 mm Table area: 1250x1500 mm Table load: 5000 kg spindle turning speed range: 35-3000 U/min Tool changer: 60 chip conveyor: covers for slideway: total power requirement: 18,5 / 22 kW weight of the machine ca.: . t dimensions of the machine ca.: 1250 x 1500 mm Fanuc 31 iMB (Manual Guide i) control system Other controls such as Siemens, Heidenhain, etc. are possible W-axis 550 Chip bucket Coolant system 20 bar Table guards The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in ...

spindle diameter: 130 mm x-travel: 3000 mm y-travel: 2000 mm z-travel: 2000 mm w-axis: 700 mm table load: 10.000 kg Table dimensions: 1600x1800 mm Control: Fanuc 31iMB voltage: 400 V number of spindle speeds: 35-3000 U/min taper ISO: 50 Tool changer: 60 total power requirement: 20/30 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 3000 mm y-travel: 2000 mm z-travel: 2000 mm w-axis: 700 mm table load: 10.000 kg Table dimensions: 1600x1800 mm Control: Fanuc 31iMB voltage: 400 V number of spindle speeds: 35-3000 U/min taper ISO: 50 Tool changer: 60 total power requirement: 20/30 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1700 mm Control: Fanuc 32iMB spindle taper ISO: 50 z-travel: 1400 mm Table area: 1250x1500 mm Table load: 5000 kg spindle turning speed range: 35-3000 U/min Tool changer: 60 chip conveyor: covers for slideway: total power requirement: 18,5 / 22 kW weight of the machine ca.: . t dimensions of the machine ca.: 1250 x 1500 mm Manual Guide i The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 970 mm, 2200 mm, 500 1/min

Control Fanuc OiTD Centre Distance 2,200 mm Max. swing over bed 970 mm Max. Swing over Cross Slide 720 mm Max. Turning diameter 850 mm Spindle Bore Ø 230 mm R.P.M. 500 kW 37 Volts 400 Cycles 50 Including: 4-Jaw chuck, Ø 800 mm rear Pneumatic 3-Jaw chuck, Ø 600 mm front

turning diameter over bed: 420 mm turning diameter over slide rest: 290 mm turning length: 900 mm turning diameter in the gap: mm turning speeds: 40 - 2000 U/min centre height: 210 mm spindle bore: 38 mm total power requirement: 4,0 KW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 2,4 x 1,1 x 1,3 m Lead and feed spindle lathe - 3-jaw chuck 220mm - Quick-change tool holder with 5 cassettes - Steady rest - Chip tray - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 410 mm turning diameter over slide rest: 260 mm turning length: 1000 mm turning diameter in the gap: mm turning speeds: 40 - 2000 U/min centre height: 205 mm spindle bore: 50 mm total power requirement: 4,5 KW weight of the machine ca.: 1,6 t dimensions of the machine ca.: 2,4 x 1,3 x 1,5 m Leadscrew lathe - with copying device - 200mm 3-jaw chuck - 2x Multifix quick-change tool holders - Live center - Machine light - Chip tray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning diameter over bed (mm) 365 Turning length (mm) 1000 Spindle bore (mm) 42.5 Max. rotary diameter over carriage (mm) 205 R.P.M. / Speed 38 - 1600 (16x) Accessories: Digital display 2 axes 3 B. chuck 250 mm, 4. B. chuck 200 mm, documentation and Multifix steel holder

Year of manufacture 1980s/90s Technical data: Tip height: 185 mm Center width: 750 mm Turning diameter over bed: 370 mm Spindle bore: 36 mm Bed width: 250 mm Speed range: 38 - 1600 rpm Tailstock mount: MK 3 Quill stroke: 110 mm Dimensions (WxDxH), approx.: 1950 x 900 x 1200 mm Weight, approx.: 800 kg Equipment: - 3-jaw lathe chuck, brand: Röhm, ø 200 mm - Quick-change holder with 4 inserts - Bed stop - Chip tray

turning diameter over bed: 1300 mm turning diameter over slide rest: 900 mm turning length: 8000 mm spindle diameter: 153 mm total power requirement: 37 kW weight of the machine ca.: t dimensions of the machine ca.: m Turning length (mm) 8000 Max. turning diameter (mm) 1300 Max. turning diameter over slide (mm) 900 Max. turning diameter in the offset (mm) 1580 Spindle diameter (mm) 153 Speed ??7 - 500 (12x) kW 37 Voltage 400V Hz 50 Powered tailstock, powered quill, coolant system, 4-jaw chuck Ø 1,000 mm Steady rest roller type Ø 60 - 300 mm Steady rest roller type Ø 200 - 600 mm Taper turning attachment, 4-way toolpost The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane c ...

spindle passage: 230 mm turning diameter over bed: 970 mm turning diameter over slide rest: 720 mm Control: Fanuc OiTD turning length: 2200 mm total power requirement: 37 kW weight of the machine ca.: t dimensions of the machine ca.: m Year of manufacture 2013 Control: Fanuc OiTD Other controls possible Turning length (mm) 2200 Max. turning diameter (mm) 970 Max. turning diameter over slide (mm) 720 Spindle diameter (mm) 230 Diameter range (mm) 850 Speed: 500 kW 37 Voltage: 400V Hz 50 Including: 4-jaw chuck, Ø 800 mm rear Pneumatic 3-jaw chuck, Ø 600 mm front The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your worksh ...

Teach-in lathe Type: BNC-2260XL Swing over bed: 550 mm Swing over cross-slide: 310 mm Distance centre tot centre: 1500 mm Max longitudinal travel Z-axis: 1650 mm Max cross travel X-axis: 300 mm Dia of spindle bore: 82 mm Power on the spindle: 15 kW Number of speeds: 80 > 3500 rpm Command: Fanuc 0i-TC Total power needed: 25 kVa Length: 3690 mm Width: 2225 mm Height: 2050 mm Weight: 4300 kg Toolchanger: yes Number of tools: 8 positions

Overhauled: 2018 Year of construction: 2001 Band saw blade 5800 x 41 x 1,3 mm Motor power approx. 11 KW with frequency control Cutting speed 20-170 m / min Square maximum work area: 430 x 430 mm Round maximum work area: 430 mm Section length 10-600 mm (~ 9999 mm multiple hub) Nachschubgeschw. Max 400 mm / s Weight approx. 4500 kg Dimensions Lxwxh 2910mm x3600mm x2200mm The machine is both technically and optically after completed retrofit in mint condition. A visit of this saw system is possible at any time. The machine will be overhauled in our House. Among other things, following points are renewed: -Modification on PLC control Siemens S7 -Renewal of the ball screw drive -New electric components -Renewal of the pneumatic pipes -New pneumatic components -Renewal of the hydraulic pipes -Overhaul and renewal of hydraulic components -Overhaul of cabin -Overhaul of  ...

The machine has a Siemens S7 control system

SIG-HBM: Maximum width of the film roll: 740 mm Control: Siemens S7 Product Moulding / straightening / filling / closing of bags - tubular bags Description horizontal bagging machine, rotating cross-sealing station for hot or cold sealing The machine is designed for the following products: chocolate bars, fruf bars, chocolate table, waffle, biscuit stacks, baked goods, deep food, non-food, pre-packaged products, cheese, meat,

SIG-HBM: Maximum width of the film roll: 740 mm Control: Siemens S7 Product Moulding / straightening / filling / closing of bags - tubular bags Description horizontal bagging machine, rotating cross-sealing station for hot or cold sealing The machine is designed for the following products: chocolate bars, fruf bars, chocolate table, waffle, biscuit stacks, baked goods, deep food, non-food, pre-packaged products, cheese, meat,

with bending bolts Prism 80 mm Stop and die holder Foot switch, optional two-hand operation Pressure adjustment Colour: blue/beige Total power requirement: 5 kW Tool height: 200 mm Stroke 250 mm Pressure 40 t Dimensions: 1300 x 680 x 1110 mm Weight: 880 kg

spindle diameter: 110 mm x-travel: 2200 mm y-travel: 1600 mm z-travel: 1600 mm spindle turning speed range: 35 - 3000 U/min spindle drive motor: 18,5 / 15 kW spindle taper ISO: 50 w-axis: 500 mm table surface area: 1250 x 1500 mm Table load: 5000 kg T-slot - width: 22 H8 B-axis (table): 0,001 ° Control: FANUC 31i-B Rapid Travel X / Y / Z-Achse: 12 m/min total power requirement: 50 kVA weight of the machine ca.: 21,5 t dimensions of the machine ca.: 7,8 x 4,8 x 3,7 m Assembly 2018 - CNC control FANUC 31i-B - Tool changer 60-fold (ISO 50) - Coolant system with IKZ 20bar - Chip conveyor - Renishaw OMP 60 - Universal milling head - Angled table (2) - CE only approx. 800h running hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mm plate thickness: 4,5 mm ST thickness at Niro-steel: 3,0 mm VA bending angle max.: 0 - 135 ° daylight opening: 100 mm back stop - adjustable: 70 - 600 mm total power requirement: 5,5 kW weight of the machine ca.: 6275 kg dimensions of the machine ca.: 3900 x 1700 x 1900 mm Description . - Full hardened structure - BEIJER 7 ”touch screen control * Software with 40 programs and up to 50 steps * 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand - Segmented upper cheek The d ...

Frequency converter, frequency converter, drive inverter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, inverter, servo drive, servo control, power supply, servo amplifier -Manufacturer: Hauser, servo controller servo amplifier 2 pieces with rack -Type: HBV 750 SEO HBMR 55 A4-445 -Price/charge: complete -Total dimensions: 390/250/H310 mm -Weight: 8.4 kg

boring mill, year 2018, CNC iTNC 640. Used machine. More info & price on IndustrialBuyer.

sheet width: 2035 mm plate thickness: 4,5 mm ST thickness at Niro-steel: 3,0 mm VA bending angle max.: 0 - 135 ° daylight opening: 100 mm back stop - adjustable: 70 - 600 mm total power requirement: 5,5 kW weight of the machine ca.: 4145 kg dimensions of the machine ca.: 3300 x 1550 x 1900 mm Description . - Full hardened structure - BEIJER 7 ”touch screen control * Software with 40 programs and up to 50 steps * 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand - Segmented upper cheek The d ...

Key data: 3100 mm, 1 mm

used Schechtl swivel bending machine, with hand roller shears, foot pedal, Sheet metal support rack, attachment rail 10 + 20mm, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Working length 3100 mm Blechstärke Stahl/sheet thickness steel 1.0 mm Blechdicke Alu/sheet thickness Aluminium 1.5 mm Blechdicke VA/sheet thickness Stainless 0.6 mm Backgauge (max.)/Backgage without Farbe/Colour grau/blau Space requirement approx. 3850 x 900 mm Machine Weight: 1300 kg Oberbolenhub/upper beam stroke 130 mm Roller shear/roller shear yes Öffnungsweite/opening width 130 mm Bending angle (max.)/bending angle 160 degrees Underbeam adjustment yes Back gauge (min,) no Machine number HB26495

HAEUSLER FLANGING MACHINE HBM-HY 8700 x 90 mm   - Forming and Flanging rollers: - inclines positon 0 - 25 Degrees - Rotation sopeed 0 - 200 M/Min - Rapid adjustment speed 2500 mm/Min - Crawling speed 0 - 1200 mm/Min - Sleeve hydro mechanical rapid speed 6000 mm/Min   - Infeed carriage: - Work piece weight 42.000 Kg - Max. dished head 8300 mm - Min. dished head 1900 mm - Speed 20 M/Sec - Centering Automatic   - Data of Workpiece: - Cold 360 N/mm2 45 mm - Hot 360 N/mm2 90 mm - Min Knuckel Radius 100 mm - Max. Knuckel Radius 1200 mm - Min thickness dished 10 mm - Head diameter without device 2600 mm - Head diameter with device       1900 mm - Length off straight flange at flanged head 3,5 x thicness = 140 mm   - Hydraulic tank 2000 Liter - Power 350 kW - Form roller changing device in combi with lifgting sleeve - Auxiliary device for flanging heads from 1900 - 2600 x 25 mm thickness ...