used MEYPACK vp

1 of used trayshrinkpacker, make Meypack, type VP500 traypacker, SW60D welding-bar type wrapper, shrinktunnel ST7840, new 2007. Operating side left. Stainless steel frame, Siemens S7 plc with SEW servos and Danfoss VFDs. Nordson ProBlue 4 hotmelt unit. Last used for small PET bottles as 6x4=24 and 6x5=30 bottles loose on tray with our without film. Capacity upto 30 trays/minute without film, upto 25 trays/minute with film. With Z-transfer between traypacker and wrapper to enable 4-sided coding (coding units NOT available). In excellent condition.

Packaging system, make Meypack, type VP452, year of construction 2006, Type of packaging: tray, tray/lid, Maximum output: 30 packs/min., Machine data:, Inlet height: 1,150 mm, Outlet height: 650 mm, Dimensions of the possible multipack:, L x W x H: 200-400mm x 120-300mm x 80-350mm, Cutting dimensions: L x W: 360 – 1,400 mm x 300 – 700 mm with Nordson hot melt device, ProBlue P/N213 544C

Overview The PET bottling line mainly contains machines from Krones and Meypack and was installed in 2011 in a German mineral water company. It was operated in the same location with a returnable PET bottling line and the two lines were sharing the same filler. Therefore the number of operating hours on the machines of this line are very low, as mainly returnable PET bottles were produced. The filler will we kept inside the returnable PET bottling line, therefore the line is sold without a filler. As the sales volume of non-returnable PET has reduced further, the line is stopped and for sale. All machines are still assembled and electrically connected.   Tech Specs: Capacity 20,000 bph, at 1l Suitable for carbonated and non carbonated beverages Neck type: 28 mm The Plant in Detail: Manufacturer: ---- Machine Type: PET Bottle Fedding Manufacturer: Lanfranchi Machine Type: PET Bottle Unsc ...

The machine packs in full cartons or trays. Capacity up to 80 cartons per minute. The change to the new carton format takes place from the operator panel - very quickly. Siemens S-7 control. Machine dimensions: Length: 9m Maximum width: 3.2m Height: 2.4 m. Weight: 3.5 tonnes The machine is equipped with a set of necessary spare parts for 2-3 years of operation. The machine after complete renovation in very good condition. Ready to work. We provide 12 months warranty. The condition of the machine and the level of modernity ensure many years of operation.

with Siemens S7 electrics By ordering, we will completely overhaul the machine and set it up to your tray size and your bottle/can type.

Speed: 18m/min, heating output: 1.35kW, length: 2750mm, width: 976mm, weight: 650kg, including documentation, spare parts and accessories.

Shrink chippers, multipackers, multipacks, cans, cans 2x2, 3x2, 4x2 Shrink foil packer, Multipacks, Beverage cans 2x2, 3x2 , 4x2

Traypacker cans, for 24 cans in the tray and multipacks/shrinkpacks/shrink packs 4 + 6 + 8 packs Traypacker Beverage cans, 24 cans per tray, multipacks, shrinkpacks 4 + 6 + 8 Packs

1X Electrical power (Kw 0.73), Centrifugal force(kg) 680, Sieving decks 1 and sieve area (m2) 0.36

ROVEMA, BOSCH, HASSIA-REDATRON, usw. vertikale Schlauchbeutelmaschinen in gutem Zustand, betriebsfertig oder (general)überholt, in Lager und Werkstatt

Rovema bagging machines VPX, VPI, VPL, partially or completely overhauled, Siemens S7-300, depending on customer requirements and requirements, incl. dosages such as snail dosing, cup dosing, multi-head scales

Automatic powder filling- and closing machine, suitable for micro volume. Speed: up to 60 units/min.

Filling quantity: 10 g, 20 g / 100 g / 200 g Capacity: 300 Pack per minute Dimensions: 9220 mm / 4100 mm / 2135 mm (L / B / H) Weight: 6,500 kg Country of origin: Germany

with Ultra Turrax T25 Vacuum pump with controler IKAVAC Heater Huber Control unit RE 1621 l P various spare parts Operating manuals Dimensions LWH: 1200 x 800 x 860 mm Weight: approx. 100 kg

VCU VP2 800 1/X Vibration Control Screen Model VP2 or VP1 Ø 800mm Vibrating sieve for food powders or granules Throughput 700-800 kg/h with salt (99% < 1mm) - Parts in contact with the product made of stainless steel Aisi 304 ground grain 120 - Lid with self-dosing inlet DN300 and vent DN100 - Screen deck H=118mm with outlet DN150, complete with clamping ring and screen mesh, mesh size 2 mm Silicone gasket and fastening ring with quick-release fastener (Quick Clamp) - Conical bottom with outlet DN 250 - 2 motors OLI, 230/400V 50/60Hz - On springs and trolleys in Mild steel mounted, painted RAL 7001 Height outlet floor = 1050 mm - Transition hose at the spout made of silicone with hose clamp/quick-release fastener

Tyre testing machine - static balancer for passenger tyres. Tyre size from 15 "to 18" (20") CE certified More details see the attached description!

Composite plant VPM355-4830 / 3604959 with condenser for freezing with 3 compressors: 4TCS-8.2Y-40P Compressors each have 8hp Built: 2006

Inductive sensor -10-65 VDC 200 mA -Sn: 40 mm -B5MNH -Number: 10 pieces available -Price: per piece -Weight: 0.5 kg

Composite plant VPP350-4860 / 3604957 with condenser with 3 compressors: 4PCS-15.2Y-40P Compressors each have 15hp Built: 2006

WOLF VPP 180 machine packing in brick bags or clip bags Packaging machine performance up to 40 cycles per minute Packaged weights from 400 to 1000g Bag format: 50 x 90mm 60 x 95mm Machine to watch in Ostrołęka

TECHNICAL INFORMATION Manufacturer: BHS Sonthofen Name: Impact crusher Type: VPM 1100x700x3 BM Drive line: 90 kW Drive type: V-belt Throughput: approx. 80 t/h (depending on the feed material) Inlet opening (width/depth): 700 x 500 mm Built: 1991 Execution: Heavy Number of impact bars: 3 pcs. Rotor diameter: 1,100 mm Weight: approx. 7,100 kg (without drive and base frame) Rotor speed: approx. 700 rpm SPECIFIC COMMENT - Incl. 3 new impact bars - Incl. new interior lining - Incl. steel support for the crusher construction If there is any interest, we are happy to send you a more detailed offer with photo documentation. EuroConsult Dimitrios Piretzidis

TECHNICAL INFORMATION Manufacturer: BHS Sonthofen Name: Impact crusher Type: VPM 1100x700x3 BM Drive line: 90 kW Drive type: V-belt Throughput: approx. 80 t/h (depending on the feed material) Inlet opening (width/depth): 700 x 500 mm Built: 1991 Execution: Heavy Number of impact bars: 3 pcs. Rotor diameter: 1,100 mm Weight: approx. 7,100 kg (without drive and base frame) Rotor speed: approx. 700 rpm SPECIFIC COMMENT - Incl. 3 new impact bars - Incl. new interior lining - Incl. steel support for the crusher construction If there is any interest, we are happy to send you a more detailed offer with photo documentation. EuroConsult Dimitrios Piretzidis

Stock # U2347-3 Used mixer by Netzsch (DE) type VPI 550 with butterfly/tri-foil agitator. Mixer has contact parts designed in stainless steel. Shaft has a working length 650 mm and is equipped with butterfly agitator, with three paddles and external diameter 1080 mm. Agitator is diven by el. motor 48 kW and is hydraulically risen up to about 130 cm. Machine is equipped with local control pane and electric cabinet. Machine is also equipped with hydraulicaly operated post for mixing can. Mixing pan is not included.

Max. speed: 90 bags/min.

KAAST Millex VPlus 7 CNC machining Centre way back in 2011 complete with Siemens Controller 802S