4 MENGELE bending presses used machines

Press brake edge machine edge bench press used Manufacturer: Mengele Type: C320-4B Built: 1966 last revision and repair: 2000 Location D-01587 Riesa Dimensions WxH: 6,250 x 3,650 mm Edge knife width: 6,150 mm sheet thickness at 6,000 mm bending length: approx. 7.5 mm. The machines are designed for very deep shaft bends, therefore very deep cheek recesses. Original 300 t pressing force - In 1989 the pressing force was increased to 350 t. The press is in very good condition despite its age. The machine is disassembled and ready for loading. documentation for the machine is available. Weight: about 45 t

Hydraulic press brake Manufacturer: MENGELE Type: A 100-2 Pressing pressure: 100t Stroke: 160mm electr. Connection: 400V 3Ph Year of construction: 1964 Condition: used and functional

pressure: 160 t chamfer lenght: 4000 mm distance between columns: 3060 mm control: FORTRON CNC 10 H 4 throat: 280 mm stroke: 250 mm dayligth: 500 mm table length: 4050 mm table width: 280 mm feed down: 70 mm/sec feed up: 68,4 mm/sec working feed: 9 / 3,5 mm/sec operating pressure: max. 205 bar oil volume: 400 l total power requirement: 19,5 kW weight of the machine ca.: 20,8 t Total weight including accessories: 22 t dimensions of machine L x W x H: 4,8 x 1,88 x 2,93 m dimensions of switch cabinet: 1,6 x 0,5 x 2,25 m Acc.: programmable back gauge, upper and lower dies, table extensions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t chamfer lenght: 3000 mm distance between columns: 2560 mm dayligth: 450 mm throat: 450 mm adjustment of stroke: 240 mm horn length over column outer edge each: 175 mm table length: 3050 mm table width: 280 mm table height over floor: 820 mm electrics - voltage/frequency: 220/50 V/Hz control: CYBELEC, DNC60 stroke: 250 mm operating pressure: 150 bar total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: L:4,0 x B:3,2 x H:3,44 m • hydraulical press brake, • new control CYBELEC DNC60 (in 2005), • lower part of the machine moves down 500 mm to the floor, at the moment the machine is mounted on a double-T-support, • prism and upper part of the machine in 3000 mm length The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mm plate thickness: 25 mm distance between columns: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1250 t chamfer lenght: 15000 mm distance between columns: 10160 mm Control: CNC 10 Grafik total power requirement: kW weight of the machine ca.: 230 t dimensions of the machine ca.: 17000 x 5400 x 5900 m - Pressure: 1.250t - Bending length:15.000mm - Control: CNC 10 graphics - No. of axes axes: min. 10 - Frame width: 10.160mm - Projection: 770mm - Table length: 15,000mm - Dimensions: 17,000mm x 5,400mm x 5,900mm - Mass: approx. 230t Equipment - Crowning device - CNC 10 control with graphics - Hydr. clamping of the upper tools - Multi-man operation - Increased speeds - Automatic height-adjustable rear sheet stop - die cushion device - Horn length 2,200 mm on both sides The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 130 t chamfer lenght: 3550 mm distance between columns: 3050 mm stroke: 250 mm Control: Cybelec weight of the machine ca.: 11.600 kg dimensions of the machine ca.: 4000x2000x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An oil-hydraulic press brake built in 1978 is offered, max. pressing force: 2000kN, max. stroke: 250mm, max. operating pressure: 295bar. Control panel defective. Viewing is possible by arrangement.

pressure: 160 t chamfer lenght: 3000 mm distance between columns: 2650 mm Control: Cybelec DNC 800 total power requirement: kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting length: 2000 mm sheet thickness - max.: 6 mm operating pressure: 250 bar fabric-no.: S2669 weight of the machine ca.: 4,7 t working width: 2059 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3 mm, 10 mm, 1 mm

Guillotine shears from a company liquidation Worked as a cutting center with automatic stacking device make Theis Control cabinet , built in 2015 new Front support arms 1,000 mm Service regularly performed according to plan 3,000 x 10 mm

Scissors

Scissors

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Spare part: Hydraulic cylinder from Mengele press brake -Equipment: with threaded stop for depth limitation -Piston diameter: approx. 240 mm -Piston rod: Ø 200 mm -Stroke: approx. 380 mm -Piston rod mounting: 212 x 212 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 840/410/H355 mm -Weight: 430 kg/piece -Weight: 430 kg/piece

pressure: 125 t chamfer lenght: 3550 mm distance between columns: 3050 mm stroke: 250 mm table width: 120 mm table height: 900 mm column arm: 320 mm return speed: 100 mm/sec working feed: 10 mm/sec control: Cybelec DNC 70 quantity of oil: ca. 250 l total power requirement: 11 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 4 x 2 x 3 m * new control Cybelec CypTouch 12 - 3 axes * Hydraulic tool clamp * Crowning * Swivel control, right front * free-moving foot control * lateral protective device (protective grille) * rear protective device (protective grille) Machine is available in about 1-2 months !! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 t chamfer lenght: 3550 mm distance between columns: 3050 mm stroke: 250 mm table width: 120 mm table height: 900 mm column arm: 320 mm return speed: 100 mm/sec working feed: 10 mm/sec control: Cybelec DNC 70 quantity of oil: ca. 250 l total power requirement: 11 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 4 x 2 x 3 m * new control Cybelec CypTouch 12 - 3 axes * Hydraulic tool clamp * Crowning * Swivel control, right front * free-moving foot control * lateral protective device (protective grille) * rear protective device (protective grille) Machine is available in about 1-2 months !! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Semi-automatic bending, pipe bending machine, mandrel bending machine MOBITEC type BAH 1-2KOTTMANN and BERGER GmbHFabr. No. 056 Year of construction 09/2004- for simultaneous bending of two pipe sections made of steel up to 12 mmBending angle max. 90Pipe diameter max. 12mmMandrel length approx. 65 mmNominal power 3.5 kWDreturn air max. 6 bar / approx. 1 litre per bending cycleMains connection 400 volts, 50 Hz- Pneumatic clamping- Pneumatic mandrel retraction- Control for angle input via STOBER Controlbox Series 4000/5000- Control SIEMENS

Folding machine KRAMER type A-toll. II 1000Fabr. No. 48 287 Year of construction 1990Useful length 1060 mmmax. Sheet thickness 3.75 mmStroke of the upper beam 180 mmAdjustability of the bending beam 60 mmBack gauge 480 mmDrive power of bending beam drive 4 kWAdrive power of upper beam drive 1.5 kWNet connection 400 volts, 50 Hz- manual and semi-automatic control- angle adjustment via angle selector- one-piece pointed rail 135- back gauge with hand crank adjustment and simple measurement scale-

Bending tool, die, lower knife, lower tool, lower jaw -Tool: for swivel bending machine -Widthen: for lower cheek -Dimensions: 59 x 19 mm -Length: 1452 mm -Weight: 10 kg

Bending tool, die, lower knife, lower tool, lower jaw -Tool: for swivel bending machine -Widthen: for lower cheek -Dimensions: 59 x 19 mm -Length: 1452 mm -Weight: 10 kg

Tube bending machine - mandrel bending machine TRACTO-TECHNIK Type Transfluid DB 2060 KSerien. No. 70173 Year of construction 2004Bending capacity (steel) max. 76.1 x 3.0 mmBending capacity (stainless steel) max. 76.1 x 1.65 mmBending tool max. 70 x 2 mm (for stainless steel)Pipe slide length 4572 mm (4300mm)Bending radius max. 150 mmBending direction clockwise (right)Bending angle max. 190Bending head speed at 90 8 sec. Hydraulic operating pressure 200 barEngine power 3 KWnet connection 400 Volt, 50 Hz, 15

Hand - Swivel bending machine KRAMER type AMS 650 x 1.5Hand swivel bending machine, bending benchYear of construction approx. 1985Working length 650 mmSheet thickness at 40 kg/mm2 1.5 mmUpper beam opening approx. 60 mmBending beam adjustment approx. 0-25 mmBending angle 0-180- Upper beam adjustment via hand crank- Pilot rail for the bending brace- One-piece sharp rail 135Space requirement L x W x H 1200 x 600 x 1100 mmWeight 160 kggood condition; used

Hand - Swivel bending machine KRAMER type AMS 650 x 1.5Hand swivel bending machine, bending benchYear of construction approx. 1985Working length 650 mmSheet thickness at 40 kg/mm2 1.5 mmUpper beam opening approx. 60 mmBending beam adjustment approx. 0-25 mmBending angle 0-180- Upper beam adjustment via hand crank- Pilot rail for the bending brace- One-piece sharp rail 135Space requirement L x W x H 1200 x 600 x 1100 mmWeight 160 kggood condition; used

Hydr. Press brake, die bending machine HAMBURGER JONESCHEIT type HYPM 70-2600Fabr. No. 4004 Year of construction 1987Printing capacity 70 ton. Working length 2600 mmStand width 2770 mmPlunger stroke 60 mmDistance table - ram max. 390 mmTable size 2750 x 200 mmMotor power 7.5 kWWet connection 380 volts, 50 Hz.- Crimping depth via mechanical fixed stop with electric adjustment and mechanical depth indicator- Lower tool consisting of 2 segments, each 835 mm, with 2 different prisms (15 and 24 mm)- Upper tool,

Manual Pipe Bending Machine, Pipe Bending Machine, Mandrel Bending MachineHand Pipe Bending Machine, Hand Wire Bending Machine, Bending MachineManufacturer: MEWAGing Power: max. 16 mm1 piece bending tool 15 mm with 25 mm bending radius1 piece bending tool 10 mm with 16 mm bending radius1 piece bending tool 8 mm with 9 mm bending radius1 piece bending tool 6 mm with 8 mm bending radius1 piece bending tool 5 mm with 8 mm bending radius- Turning plate with degree marking- Scope of delivery as shown- Wooden box for storageDimensions L x W x H: 570 x 480 x 145