MAGGI steff used machines

Type Junior 640 Motor power 3 kW Blade diameter 350 mm Motor arbor 30 mm Blade speed, rpm 2800 rpm Max trimming capacity: 860 mm Depth of cut with motor at 45? mm Depth of cut 90?: 110 mm Table dimensions 1050?690 mm Saw the angle 0? +45? -45? Made in Italy Transport dimensions Weight 180 kg

Cutting height: 60 mm saw-blade dia.: 350 mm Motor output: 5,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Uniform spindle spacing: 32 mm Number of spindles: 23 Distance between the first and last spindle on the drill head: 672 mm drilling depth: 80 mm Table size: approx. 900 x 545 mm size of the workpiece: 800 x 2500 x 100 Working pressure: 0.6 MPa Air consumption: 10 NL/cycle Voltage, frequency: 400 V/50 Hz Spindle speed / min.l: 2800 rpm. Motor power: 1.5 kW Weight ca: 400 kg Dimensions: 1220 x 1065 x 1400 mm * Patented spiral system Programming and adjustment devices of horizontal and vertical Drilling depth. * Pneumatic drill head shears * Drill head frame of 0-90 degrees with blocking in any position and reference switching angle with each angle * Head with quick-connect spindles (the quick-release buckets are a Zubehoer). * 5 quick-release buckets are standard. * 2 patented pneumatic pressure devices accident-protected. * 2 side connectors on th ...

CATALOG NUMBER M0252 PRODUCT FEATURES The main features of the machine: - Single-head drilling machine for drilling in the range of 0 - 90 ° - Pivoting angle of the head adjusted pneumatically - Possibility to set lateral supports with an accuracy of 0.1 mm - Safety holders allow quick adjustment of panels without adjustment - Spindles adapted for quick couplers - Patented pneumatic clamps of the material - MDF work table - Quick and accurate adjustment - Precise drilling - Italian production Standard equipment of the machine: - 2 aluminum rulers with a length of 1.5 m (right and left) with four stopwatches - 5 quick connectors - Wooden box securing the machine in transport. ADVANTAGES - vertical / horizontal / angled drilling - multi-spindle - new machine - CE certificate - solid - professional TECHNICAL DATA - number of spindles 23 - dista ...

Duebel hole drilling machine BORING SYSTEM 21 PRESTIGE QUICK CONNECTIONS 21 DRILLING SPINDLES AXLE DISTANCE 32 MM CENTER DISTANCE FROM THE FIRST TO THE LAST DRILL CHUCK 640 mm DRILLING DEPTH 65 mm Engine power 2 hp Aluminium stop with 2 folding straps equipped with 1 left stop 1500 mm and 1 right stop 1500 mm 5 drilling spindle droplets 2 Pneumatic hold-downs in a safe and secure manner incl. packaging Quick Connection Drilling Spindles Drill head in cast iron Cast iron work table Drilling depth adjustment via patented spiral system Pneumatic scraping of the drilling group from 00 to 90 ° adjustable in any position. Stop infinitely adjustable via millimeter scale with magnifying glass High drills over num. digital display adjustable Back-side stop max. travel 300 mm Fixed stop on 37 mm for doorband Machine built according to Ce standards

1994. 1996, 2004

motor power 3KW Table top dimensions 2000x770mm 3-angle cutting adjustment year of manufacture 2009 cutting height max 125mm maximum cutting width 865 mm 400 V

Cutting height: 195 mm saw-blade dia.: 550 mm Motor output: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting height: 195 mm saw-blade dia.: 550 mm Motor output: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pitch: 32 mm Working width: 896 mm Boring depth max.: 65 mm Motor output: 2x1,5 kW Overall size: 1122x1040x1250 mm Weight: 380 kg Number of boring spindles: 29 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pitch: 32 mm Working width: 1088 mm Boring depth max.: 85 mm Motor output: 2x1,5 kW Overall size: 1320x1040x1250 mm Weight: kg Number of boring spindles: St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting height: 195 mm saw-blade dia.: 550 mm Motor output: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pitch: 32 mm Working width: 704 mm Boring depth max.: 70 mm Motor output: 1,5 kW Weight: 310 kg Number of boring spindles: 23 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rolls: 3; Roll width: 60mm; Roll diameter: 120mm; Travel: 20mm; Speeds: variable 3 - 18 m/min.; Tripod selectable: Delivery without tripod / optionally the following tripods can be selected: Standard / 1050 / PLUS with counter; Motor power: 0.75kW;

TECHNICAL DATA: Spindle: Ø 35 mm Spindle tilt: 0° - 45° Manual spindle height adjustment Adjustment of the direction of rotation Adjustable speed from 3000 to 10000 rpm Installed power: 5.5 hp EQUIPMENT: 1 3-roller drive (Maggi Steff 2034)

Excellent condition - Fully operational - Loading / Transport possible! Table dimensions 1255 x 900 mm, table height 900 mm, motor power 6 kW, speeds 3000/4500/6000/9000 rpm, tool holder SK 40, double-sided electromotive spindle adjustment, electromotive table opening switching 72/105/160/225/305 mm, spindle diameter 30 mm, integral fence AIGNER, extendable workpiece support, spindle height adjustment 150 mm, 4-roll-feed unit MAGGI STEFF 2044, 8 feed rates 4 to 66 m/min, Electromotive Integral Fence Adjustment, Double-sided Table Extensions 580 mm plus Swivelling Stop per Side.

Saw blade Ø 300 mm; overall size 130x120x170 cm; working height 90 cm; table size 106x91 cm; equipped with Maggi Steff 2034 power supply Auction-ID: A1-44305-33

NUMBER OF SPINDLES 21 SPINDLE DISTANCE 32 MM DISTANCE BETWEEN FIRST AND LAST SPINDLE 640 MM DOWEL DRILL HEAD BY MAGGI MADE IN ITALY

SCM T130E spindle moulder Spindle diameter 40mm Overall length of spindles 180mm Spindle speed variable by inverter up to 10,000r.p.m Main motor power 7.5kw Spindle rotation right and left Electronic spindle height adjustment Electronic setting of fences Electronically adjustable roller feed 4-roller feed Maggi Variosteff 4 Feed speed control via variator CE Certified DTR documentation Year of production 2004

overhauled in 2012 and equipped with a new Beckhoff control system with touchscreen. Extruder S 50/22D for HDPE single head with Moog servo valve and WDS. Steffes lekstester is there. Very good condition. Available from stock immediately, subject to prior sale

Robust swivel milling machine T 26 swivel from -45 to +45 degrees Swivel milling machine in very good equipment A treat for every Martin fan Pole-switchable drive motor 5 / 6kW with automatic motor brake R/L Barrel Swivel angle from - 45 to + 45 degrees electrically adjustable Height adjustment max. 150mm, electrically adjustable When adjusting the height, the correction factor for the swivel angle is displayed in the upper display, which is then adjusted at the stop, so that adjustments can be made according to drawings Four speeds 3000, 4500, 6000 and 9,000 rpm Spindle diameter 30mm, mandrel fix quick-change spindle with torque wrench T226 comfort stop with digital displays for overall adjustment and infeed jaw individually, as well as input of the cutter diameter, whereby the cutting depth is automatically calculated Stop with lifting device can be swivelled away (for s ...