MAE hy used machines

Single column hydraulic press MAE type S63SZ SOMasch.Nr. 551277 year of construction approx. 1977Nominal compressive force 63 ton. Pressing force: 50 tons (Practically tested)Projection 320 mmTable surface 850 x 630 mmRam area 1050 x 500 mmRam stroke 500 mmInstallation height max. approx. 730 mmTable height above floor 970 mmTank capacity hydraulics 600 litersDrive power 15 kWNerg connection 380 volts, 50 Hz- Hydraulic drawing cushion under the table with holes through the table top- 2-hand control- Electrical control cabinet damagedSpace requirement L x

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic cylinder press brake -Hydraulic cylinder: comes from a hydraulic press manufacturer MAE type HY-S63S pressing force 63 tons -Hydraulic cylinder: pressure piston stroke 690 mm -Piston rod: Ø 130 mm -Piston diameter: approx. 160 mm -Bolt circle: Ø 180 x 18 mm -Dimensions: Ø 270 x 1200 mm -Weight: 330 kg

pressure: 100 t throat: 380 mm stroke: 300 mm arm length: 380 mm table surface area: 1700x700 mm ram surface: 1400x700 mm dayligth: 650 mm total power requirement: 30 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 2400x3600x3400 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t throat: 320 mm stroke: 250 mm arm length: 320 mm table surface area: 1400x600 mm ram surface: 1200x600 mm dayligth: 650 mm total power requirement: 22 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 3200x3300x3300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: . t throat: . mm stroke: . mm total power requirement: . kW weight of the machine ca.: 4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic press, single-column press, C-column press, oil-hydraulic press, hydraulic single-column press -Handover: in its current condition as inspected -Note: without hydraulic unit and control system -Pressing force: 40 tons -Piston rod: Ø 105 mm -Max. stroke: 710 mm -Mounting plate: 550 x 800 x 45 mm -Mounting plate holes: Ø 18 mm -Dimensions: 890/1570/H610 mm -Weight: 826 kg

Automatic straightener, shaft straightener , MAE -25RH, 1996, used Manufacturer: Maschinen- & Apparatebau Götzen GmbH, Germany Connected load: 14.5kva , Dim.: 2.5 x 1.5 x 1.8m, Weight : 5000kg

Key data: 25 t

Automatic straightener, shaft straightener , MAE -25RH, 1996, used Manufacturer: Maschinen- & Apparatebau Götzen GmbH, Germany Connected load: 14.5kva , Dim.: 2.5 x 1.5 x 1.8m, Weight : 5000kg

Automatic straightener, shaft straightener , MAE -25RH, 1996, used Manufacturer: Maschinen- & Apparatebau Götzen GmbH, Germany Connected load: 14.5kva , Dim.: 2.5 x 1.5 x 1.8m, Weight : 5000kg

machine measurements: 2.000 x 1.300 x 1.800 mm machine weight: 1.500 kg power capacity: ca. 2,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

machine measurements: 2.900 x 700 x 1.700 mm machine weight: 400 kg power capacity: 2,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 1000 mm grinding width: 300 mm workpiece height: 230 mm table surface area: 1000 x 240 mm x-travel: 1000 mm y-travel: 270 mm z-travel: 350 mm grinding wheel diameter: 240 mm grinding spindle speed: 2180 U/min table speed -stepless-: 3 - 30 m/min total power requirement: 4,5 kW weight of the machine ca.: 2,8 t dimensions of machine L x W x H: 2,36 x 1,37 x 2,0 m Accessories: magnetic plate 680 x 200 mm, grinding wheel with flange (ø 240 x 25 mm), wet grinding attachment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 t distance between columns: 500 mm stroke: 200 mm total power requirement: 10 kW weight of the machine ca.: 4.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Maxi Maestro D.C Servo Drive 200 x 25/50

CNC gear rack grinding machine - Automatic grinding head - B-Axis Grinding head ca 20 gr swivel - ARO - KKS coolant tank 8000 L ( size 4400 x 1900 x 2200) - Pendel opperation ( double table) - Dresser automatic - Table dresser

temperature max.: . ° internal length of the oven: . mm internal width of the oven: . mm internal height of the oven: . mm total power requirement: kW weight of the machine ca.: t Annealing furnace with extraction system Make: Helmut Peiler 2 pieces available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

temperature max.: . ° internal length of the oven: . mm internal width of the oven: . mm internal height of the oven: . mm total power requirement: kW weight of the machine ca.: t Annealing furnace with extraction system Make: Helmut Peiler 2 pieces available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure:6 t stroke:1020 mm total power requirement:3,5 kW Can only adjust between tips

The Hycon HWP4 is a 4-inch hydraulic submersible pump for waste water, , designed for large-scale dewatering in heavy-duty applications such as groundwater lowering and dirty water with large solids., Includes extension boom for mounting in the machine., , Key Specifications, Capacity: Up to 120 m³/hour., , Hydraulic requirements: Oil supply 30-40 l/min at 120-150 bar working pressure; max. 172 bar., Max. delivery head: 22 m; solids up to ø74 mm through vortex impeller., Weight: 26.7 kg; dry-running resistant thanks to direct hydraulic drive., , Features and Benefits, No electrical cables required; can be connected to power packs, excavators or tractors for versatile use., , 4-inch BSP connection, , Throughput capacity: 120 m3/h, Max dirt passage: 74 mm, Max. head: 22 MWK, Weight: 27 kg, , = More information =, , Year of manufacture: 2021, Empty weight: 28 kg, Connector size: 4 inch, , ...

Hemco hydraulic tracing lathe Hopper feed very good condition...$7,900 obo Contact Fred (716) 433 4224 (12:00 noon is best time to call)

GEKA HYDRACROP 55/S hydraulic ironworker machine was built in 2018 in Spain by MAQUINARIA GEKA S.A. The machine, equipped with 5 work stations, is designed for precision machining of flat bars and angle bars. Each station is controlled by two hydraulic cylinders, which give the possibility to work independently or in parallel on two stations simultaneously. The GEKA HYD 55 S ironworker machine weighs 1390 kg. Technical specifications of the GEKA HYDRACROP 55/S ironworker machine General data - maximum punching force: 55 t - maximum cutting force: 110 t - number of workstations: 5 - number of hydraulic cylinders: 2 - engine power: 5 kW - weight of the GEKA HYDRACROP 55/S machine: 1390 kg Flat bar shearing station - flat bar dimensions: 300 x 15 mm; 200 x 20 mm - blade length: 305 mm - working height: 880 mm Angle bar shearing station - shearing of angle bar at 90°: 12 ...

Hydrostat / Acid Gearbox SPV23 000 29852

Hydraulic Connections Fittings in Original Packaging Best Quality Made in Germany, Italy Price: â?¬ 2,00 / kg

Hydraulic hose tree Storage shelf for hydraulic hoses The slots can be swivelled out for reloading. Each inserting shell can be rotated to remove the hoses. Beuhqhh0xx It is 1 piece shelf with 7 shelves. Without the contents of hoses. A large item of new hoses in different diameters can also be purchased Such shelves are necessary in companies that produce hydraulic hoses with a hose press.

We are looking for all models of Doosan, Daewoo, Hyundai and Hitachi wheeled excavators for export