MACMON 100 used machines

Code 61044 Description Toolroom millingmachine Make MACMON Type M 100 E Serial no. 1176 Year 1984 Table size 600 x 215 mm Longitude traverse table (X) 310 mm Cross traverse millinghead (Y) 170 mm Vertical traverse milling head (Z) 340 mm Spindle taper 40 ISO 16 Spindle speeds: H / V 40 - 2000 rpm 16 Feeds: longitude and vertical 9 - 450 mm/min Spindle motor 1,3 and 1,8 kW - 380 Volts Dimension L x W x H 1,1 x 1,1 x 1,4 meter Weight 750 kg Accessories Universal millinghead with quill of 70 mm Coolant Condition Machine is in good condition

x-travel: 290 mm y-travel: 170 mm z-travel: 310 mm table surface area: 600 x 215 mm spindle taper: SK 40 spindle turning speed range: 50 - 2500 U/min feeds: 9 - 450 mm/min quill stroke: 70 mm total power requirement: 1,8 kW weight of the machine ca.: 860 kg dimensions of machine L x W x H: 1,06 x 1,05 x 1,33 m Accessories: vertical head with quill retraction, solid table, counter bearing, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 310 mm y-travel: 340 mm z-travel: 170 mm total power requirement: 2,5 kW weight of the machine ca.: 900 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 290 mm y-travel: 170 mm z-travel: 310 mm table surface area: 600 x 210 mm spindle taper: SK 40 spindle turning speed range: 50 - 2600 U/min feeds: 9 - 450 mm/min quill stroke: 70 mm total power requirement: 5,5 kW weight of the machine ca.: 720 kg - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Macmon M100 Universal Milling Machine with Digital Display -Feed range in steps 9-450mm/min -Horizontal 40-2000 rpm -21 spindle speeds vertical 50-2500 rpm -Spindle holder SK40 -Projection of the V-spindle approx. 100-320mm -Installation height under spindle 350mm -Vertical Head Quill 70mm -Vertical head swivels 360 degrees -Fixed angle table 215x600mm -Milling slide path transverse manual 170mm -Vertical motor/manual 310/340mm -Table travel longitudinal motor/manual 290/310mm -X-travel 310mm -Y-travel 340mm -Z-travel 170mm -Automatic feeds and rapid traverses in all 3 axes -Total power requirement 2.5kW -Spindle drive 2.2kW -Total drive 2.5kW-380V-50Hz Dimensions: LxWxH 1.5x0.7x1.5 meters / Weight 900Kg

Heidenhain TNC 124 Year of construction 1996 Spindle holder ISO 40 Travel 310 x 170 x 340 mm 16 spindle speeds from 40 - 2500 rpm Infinitely variable feeds Weight approx. 700 kg

Key data: 310 mm, 170 mm, 340 mm

Built in 1990, with 3-axis digital display. Spindle holder ISO 40, travels 310 x 170 x 340 mm, 16 spindle speeds from 40 - 2000 rpm, 16 feeds from 9 - 450 mm/min, motor power 1.2/1.8 kW, weight 700 kg. The machine is in good condition.

x-travel: 400 mm y-travel: 250 mm z-travel: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Heidenhain TNC 124 control quill electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 400 mm Querweg (Y-Achse) / Y-travel cross 250 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Tischaufspannfläche / table clamping area 600 x 320 mm Werkzeugaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed range 30-6300 UpM Vorschub x,y,z / feed x,y,z 10,10,8 m/min. Antriebsleistung gesamt / drice capacity 6,5 kW Gewicht ca. / weight ca. 1200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTec ...

Macmon M400 CNC with Heidenhain TNC 355 control Manufacturer: Macmon Type: M400 CNC Control: Heidenhain TNC 355 Year of Make: 1994 Weight: 2700 kg Connected load: 12 kW Travel X: 630 mm Travel Y: 450 mm Travel Z: 380 mm Clamping surface table: 800x500 mm Spindle revolutions: 20-2780 rpm Levels: 2x continuous Spindle power: 5.5 kW Tool holder: SK40/ISO40 Final drive: 0-2000 mm/min Final drive rapid traverse: 5000 mm/min Quill stroke W: 100 mm Head Swivel: 2x90° Resolution measuring system: 0.001 mm Positioning: +/- 0.02 mm Special features: Protective housing that can be opened, chip tray, quill stroke

x-travel: mm y-travel: mm z-travel: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand ingot caster plantMfc.:Sistem TeknikBuilt:1/2015Stopped in 4/2015Recycling capacity:5000 Ton/annumQty. 12 Units of Pyrotek moldsDim. of aluminium ingot: 1000 x 1000 x 500 mmWeight:500 kgCharging material: Aluminium cans, profiles, sheets, motor blocks, wheels etc.Scope of supply:Aluminium shredderMagnetic separator Aluminium de-coating machine Baler Aluminium gas furnace Aluminium casting system Gas generator Mass ARUN spectrometer Air compressor, conveyors, forklift, ect.Shredder and magnetic separation conveyorMfc.:YSSType:Mono shaft shredder J600Capacity:500 kg per hour high power electrical shredding machineMono shaft shredder stylePLC automatic control unit Siemens?Hydraulic unit for material pushing to shredding wheelCurrent control for shredder reverse – safe usageShredded aluminium pass onto conveyor unitMagnetic separation system for steel removalE ...

used chamber filter records 1000 x 1000 PP approx. 190 pieces in the camp

Material: mild steel Drive: 45 KW Weight: 2000 kg Dimensions: 1500 x 1500 x 1600 mm

with Freeflow Printserver and Clear Toner M. No.: 3130055185 Counter (m): 7.3 Colors: 4 + varnishes Format : A7 – A3+ (SRA3) Equipment / Additional information: Image Resolution: 2400 x 2400 dpi VCSEL ROS Productivity/Print Speeds—AWM • 80/100 ppm (8.5" x 11"/A4 letter), all weights 55–350 gsm (15 lb Bond to 130 lb Cover) • 4800/6000 full process color A4 (letter) 4/0 impressions per hour • 44/50 ppm (11" x 17"/A3–12" x 18"/SRA3), all weights 55–350 gsm (15 lb Bond to 130 lb Cover) • 2400/3000 (11" x 17"/A3–12" x 18"/SRA3 tabloid) 4/0 impressions per hour and 4800/6800 (8.5" x 11"/A4) IMP Paper Format/Sizes • Maximum Sheet Size: 13" x 19.2" (330 x 488 mm) • Minimum Sheet Size: 7.2" x 7.2" (182 x 182 mm), tray inserter kit supports for 4" x 6" (102 mm x 152 mm); see Optional High Capacity Feeder • Maximum Print Area: 12.83" x 19.05" (326 mm  ...

Rexroth double pump for Battenfeld injection moulding machine SY2DFE1-2X/100-100 MNR: R901016480

Clamping plate, welding table, welding table, straightening plate -Width: 1000 mm -Length: 1000 mm -Height: 780 mm -Surface: milled -partly with threaded holes -Plate thickness: 25 mm -with supporting ribs -Weight: 214 kg

500 Heavy Duty Grating 100 x 100 cm Used goods, very good condition, see pictures hot-dip galvanized Weight load: approx. 450 kg/m² Dimensions: 1000 x 1000 mm Mesh size: 20 x 30 mm Bearing rod height: 45 mm Material thickness bearing rod: 3 mm Negotiation price: € 45,- net per piece from stock Larger quantities on request! Numerous gratings with different mesh sizes and support rods available! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

Bühler Riser (Tarar) MVSO 100 converted to MVSQ 100

MHG pressure blasting machine SMG 100-100 incl Dust Extractor 1703-1,5

Specifications: Working length: 3100 mm Stand width: 2650 mm Pressing force: 100 tons CNC control : AMADA OPERATOR II 14-inch TFT color screen Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Mot. adjustable back gauge Projection: 415 mm Stroke: 200 mm Working height: 960 mm Crowning Engine power: 9 kW Dimensions (length x width x height): approx. 4300 x 2300 x 2950 mm Weight: approx. 8 tons Accessories: 1 set of segmented AMADA tools

WMW Union BFT 80/2 X: 1000 - Y: 1000 - Z: 1600mm Spindle Dia: 80 mm Spindle bore: ISO 50 Table dimensions : 1100 x 1000 mm Table longitudinal travel (X-axis): 1000 mm Cross travel Table/colom (Y-axis): 1000 mm Height travel head (Z-axis): 1600 mm Max travel spindle: 700 mm Power on spindle: 1250 rpm Power principal motor: 8,5 kW Weight: 11 ton

Metal Detector to check vertical falling products. The product is passed from above through a hopper. Ideal to combine with multi head weigher and vertical packaging machine. Stainless steel framework, touch screen. - Specifications: detecting accuracy: FE from ? 0.6mm, SUS from ? 1.8mm | tunnel size: ? 100mm | power: 220V/0.05kW, 50Hz/60Hz | dimensions and weight: L50xW50xH40mm, 45/145kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Daewoo X: 1250 - Y: 1000 - Z: 1000 mm CNC X-axes: 1250 mm Y-axes: 1000 mm Z-axes: 1000 mm Table dimensions: 800 x 800 mm Max weight on the table: 2000 kg Admission in spindle (ISO): ISO 50 Power on the spindle: 25 kW Control: Fanuc OM Number of axes: 4 axes: X,Y,Z,B Toolstore: yes Tools: 90 positions Frequency : 20 -> 4500 rpm Number of pallets : 2x Power principal motor: 70 kva Length: 4100 mm Depth: 6850 mm Height: 3240 mm Weight: 18 ton ACCESSORIES: yes Cooling-system: yes

Used welding equipment As seen in the pictures, technical data See pictures. If you have any further questions, please Price is per piece

Used welding equipment As seen in the pictures, technical data See pictures. If you have any further questions, please Price is per piece