used LODIGE fkm

USED LÖDIGE FKM 2000D STAINLESS STEEL 2.000 LITRES BLENDER REF#: C5725 Lodige FKM2000D mixer with a total volume of 2000 liters manufactured in 316 stainless steel. Two inspection doors with a 55 kw geared motor completely reconditioned. General characteristics: Manufactured by LODIGE Model FKM 2000D Material Stainless steel 316 Year built 1973 Weight 3700 kg (2060 kg + 1640 kg motor and reducer) Technical characteristics: Capacity 2,000 L (800-1,400 L useful) Motor characteristics: Manufactured by SCHORCH Voltage 400/690 V Current 94/55 A Power 55 kW Frequency 50 Hz cos(fi) 0.89 Rotational speed 2960 rpm Reducer characteristics: Manufactured by ELENDER Model SZBW 250 Ratio 0.04 Rotational speed 120 rpm

Stock# UG6234 Very little used high shear mixer/granulator made by Lodige (Germany) model MGTL 10. Machine is designed in stainless steel. Interchangeable cylindrical vessel with a total capacity of 10 liters and a working volume ranging from 25% to 70% of the volume of mixing chamber. Mixer equipped with a three-arm mixing impeller bottom driven by el. motor with the power 2.7 kW, 3000 rpm, and side entry chopper driven by el. motor 0.42 kW, 3000 rpm. The speed of the agitators is fully adjustable. Includes additional tulip type agitator, a spray nozzle and Watson Marlow peristaltic pump with adjustable speed in the range from 3 to 400 rpm and the capacity of about 5.7 to 760 ml / min. Mixer passed the FAT (Factory Acceptance Test) and the qualification according to the GMP (Good Manufacturing Practice) guidelines. Unit includes full technical documentation and spare parts. New in 20 ...

Used ploughshare mixer with a capacity of approx. 100 L. Mixer equipped with 1 chopper with a 3 kW motor. Contact parts with the product made of stainless steel. Mixer mounted on a solid base frame and equipped with a vertical frame for mounting additional equipment, eg installation for feeding. Chamber dimensions: length 66cm, diameter 50cm. The dimensions of the whole set: width 135 cm, length 125 cm, height 135 cm.

Old Lodige KM 1200 D continuous mixer with ploughshares (year 1977) transformed into a mixer-dryer (year 2017) by the previous user. Modification made : New enclosure / mixing chamber in stainless steel 316. Change of motor transmission: belt -> geared motor Main material: 316 stainless steel Year: 2017 Type of drying: hot air blowing Without electrical cabinet With piping 1 - Ploughshare mixer 1200 L Motor manufacturer: SEW Power : 18,5 KW Material: 316 stainless steel + 2 manual butterfly valves + 2 manual Orbinox knife gate valves Porthole interior view Safety box suppression (brand : Vigilex) No manufacturers plate 2 - Fan n?1 Manufacturer: Kiekens Model: 8 KTEN 355 Year : 2017 Volume: 1204 m3 / H Power : 15 KW Temperature : 80?C Atex : yes Ex II 3D/G td nA 3 - Fan n?2 Manufacturer: Kiekens Model : 8 KTEN 28 ...

Lodige FM130D ploughshare mixer Serial: 12321 130L ploughshare mixer, stainless internals with stainless breaker, bottom mounted discharge with manual discharge valve,

Lodige FM130D ploughshare mixer, Serial: 12321, 130L ploughshare mixer, stainless internals with stainless breaker, bottom mounted discharge with manual discharge valve, 3Ph this extra information is standard for this model. Please always double-check the details during a visit The Lodige FM130D Multishaft mixer is a high-performance pharmaceutical machine designed for mixing and blending powders, granules, and other pharmaceutical ingredients with exceptional precision and efficiency. With a capacity of up to 130 liters, this model is suitable for small to medium-scale pharmaceutical production processes. Equipped with multiple mixing shafts and a unique mixing mechanism, the Lodige FM130D ensures thorough and homogeneous blending of ingredients, resulting in consistent product quality and uniform distribution of active pharmaceutical ingredients (APIs) throughout the mixture.  ...

Manufacturer : L?dige Model: FKM 1200D 2H Type: ploughshare mixer Year : 1966 Motor power: 15kW Materials in contact with product: stainless steel Total volume: 1200 L Plugs for choppers (not installed): 2 Transmission: geared motor

Material: stainless steel Engine: 160 kW Content: 15000 ltr Weight: 11000 kg Length x Width x Height: 6300 mm x 2200 mm x 2500 mm Mechanism SDW (340kW) Flender Speed: 1500 / 63 More details on request. Very good condition. You can also get the entire system with all components you need.

Totalent emptyer with hydraulically operated floor flaps over the entire length, drive 37 kW via Flender gearbox, incl. hydraulic unit with 4 kW for actuating the floor flaps and pneumatic flaps for filling from above. The micl is occupied with Becker shovels, the mixer has three flanges for retrofitting knife heads / choppers. Mixer, drive unit and hydraulic unit are mounted on a stable base frame; The scope of delivery also includes another frame for spring-supported vibration reduction.

Totalentleerer mit hydraulisch betätigten Bodenklappen Single-shaft ploughshare mixer with hydraulically perated discharging flaps (full length engagement), incl. 4 kW hydraulics aggregate for operating bottom flaps and pneumatic flaps om top for feeding. Mixer shaft is equipped wirh Becker shovels, mixer has 3 mounts for retrofitting choppers. Mixer, drive unit and hydraulics aggregate are mounted on solid base frame; included in scope of supply: Second base frame with spring-based vibration reduction system.

NORMAL STEEL Drive 75 kW geared motor (Siemens),. with Becker blades

Batch horizontal mixer in standard steel version, lined inside with carbide, useful filling up to approx. 800 l.. Drive over 37 kW motor, Flender head gear and start-up clutch, equipped with 2 flanges for optional knife heads / choppers. Slingshot shaft with armoured Becker shovels (as good as new). Incl. basic frame for mixer, gearbox, fluid coupling and motor. Sandblasted and repainted.

Horizontal batch mixer in carbon steel design, hard metal lining inside, net capacity: Up to 800 l., drive unit: 37 kW drive, Flender gearbox and fluid clutch; equipped with 2 flanges for optional choppers. Shaft equipped with hard metal Becker shovels (mint). Incl. base frame for mixer, drive, clutch and gearbox. Sand blasted / complete repaint.

Normal steel Drive: 37 kW; Gear motor with 4 inlets, TWO dead space free outlet valves 2 cleaning doors and 4 flanges for mounting of tool heads

Mixer batch mixer Loedige FKM 130 D Version in stainless steel Ex protected very good operational condition, directly from production!!! Speed range 29-187 rpm Mixer volume 130 l Power 7.5, KW

Sloping Plough charm Type FKM 600 D stainless steel, without chopper (connection available), drive 15 Kw with speed control. Y.O.M. 1985

bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 130 mm spindle taper: SK 40 spindle turning speed range: 70 - 3200 U/min : 520 mm : 230 mm table surface area: 730 x 210 mm connected load frequency: 400 V total power requirement: 1,1/1,5 kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 1,1 x 0,9 x 1,15 m domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 300 mm z-travel: 440 mm table-size: 1120 x 260 mm spindle taper ISO: 40 spindle turning speed range: 35 - 1600 U/min total power requirement: 2,2 kW weight of the machine ca.: 1,36 t dimensions of the machine ca.: 1,65 x 1,32 x 1,65 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 300 mm z-travel: 350 mm table-size: 1120 x 260 mm spindle taper ISO: 40 spindle turning speed range: 67 - 2010 U/min quill stroke: 120 mm bore capacity in steel: 40 mm total power requirement: 2,2 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: 1,58 x 1,45 x 2,15 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 25 mm throat: 185 mm bore stroke: 50 mm spindle taper: MK 3 spindle turning speed range: 50 - 2500 U/min : 178 mm : 480 mm table surface area: 700 x 180 mm connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 160 t dimensions of the machine ca.: 0,75 x 0,8 x 0,9 m domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mm throat: 360 mm bore stroke: 150 mm spindle turning speed range: 120 - 3000 U/min spindle taper: SK 40 : 650 mm : 320 mm vertical adjustment: 500 mm table surface area: 1000 x 300 mm connected load frequency: 400 V diameter of hob: max. 80 mm total power requirement: 2,2 kW weight of the machine ca.: 0,85 t dimensions of the machine ca.: 1,25 x 1.5 x 2,3 m New Model Industrial Drilling and Milling Machine with Manual Transmission and High Speed Range. The prism guide in the Z-axis ensures a high degree of precision even in the most difficult milling jobs. Domestic equipments: • automatic feed in X-axis • 3-axis digital display • motorized Z-axis • Feed in quill • Left-right-run high • tapping attachment • Gear head swiveling • Coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1000 mm y-travel: 300 mm z-travel: 400 mm table-size: 1320 x 360 mm spindle taper ISO: 40 spindle turning speed range: 58 - 1800 U/min total power requirement: 4 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,1 x 2,1 x 1,95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 200 mm z-travel: 350 mm table-size: 700 x 200 mm spindle taper ISO: 40 turning speed range - horizontal: 150 - 1660 U/min turning speed range - vertical: 110 - 1230 U/min quill stroke: 120 mm spindle drive: 3,0 kW weight of the machine ca.: 1,15 t dimensions of the machine ca.: 1,31 x 1,38 x 1,65 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 130 mm spindle taper: SK 40 spindle turning speed range: 75 - 3200 U/min : 500 mm : 230 mm table surface area: 720 x 210 mm connected load frequency: 400 V diameter of hob: max. 80 mm total power requirement: 1,1 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,1 x 0,9 x 1,2 m domestic equipments • Digital display • Digital depth gauge for quill • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stainless steel machine with two choppers