3 LNS bar feeders used machines

LNS QUICK LOAD SERVO 2 / Rod Loading Magazine -Rod diameter (round) 6 - 80mm -Pole length 1.3 - 1.5 meters -Bar weight max. 67 kg -Charging time 4 - 12 seconds -Feed speed Max 100m/min -Air connection 5 bar Dimensions: LxWxH 2.2x1.5x1.5 meters / Weight 650Kg

for material Ã?: 6-80 mm for rod lengths: 100-915 mm Recording size: 945 x 800 mm Working height: 1400 mm height adjustment: +/-200 mm Electr. Connection: 220 V Space requirements: 3420 x 1150 x 1500 mm Weight: 300 kg

Bar feeder LNS Quick load Servo 3 for sale. Find more here - / Contact us at -

Find more here - / Contact us at -

CONTROLS   electronic controls DIMENSIONS / WEIGHTS   space requirements -left/right-: 4600 mm   space requirements -front/back-: 600 mm   total height: 1200 mm   total weight approx.: 500 kg ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz

Year of manufacture 1989 | Working range (diameter) Ø 6 mm to Ø 42 mm | Max. bar length 4,000 mm (Type 4.4) | Guide principle Hydrobaric (full oil bath) | Feed drive Hydraulic | Oil capacity approx. 150–170 litres (HLP 46 or equivalent) | Total length of the magazine approx. 4,850 mm | Weight (empty) approx. 650 kg | The machine can be viewed in operation by appointment. | Subject to changes and errors in the technical data and specifications, as well as prior sale!

Year of manufacture 2011 | Working range (diameter) Ø 6 mm to Ø 42 mm | Max. bar length 3,000 mm | Guide principle Hydrobaric (full oil bath) | Feed drive Hydraulic | Oil capacity approx. 150–170 litres (HLP 46 or equivalent) | Total length of the magazine approx. 4,850 mm | Weight (empty) approx. 650 kg | The machine can be viewed in operation by appointment. | Subject to changes and errors in the technical data and specifications, as well as prior sale!

Year of manufacture: 2007 | Type: Bar loading magazine | Easy changeover of the guide channel in less than approx. 2 minutes. | Complete changeover of the guide elements possible in less than approx. 8 minutes. | Technical details: | Diameter range: 2 mm to 20 mm | Channel Ø 22 mm | Maximum bar length: 3,000 mm | Installation dimensions / dimensions (L x W x H): 3,970 x 480 x 1,250 mm | Weight: approx. 850 kg | Condition: fully functional | The machine can be viewed in operation by appointment. | Subject to changes and errors in the technical data and specifications, as well as prior sale! | Translated with DeepL.com (free version)

Suitable for extracting oil mist., Nominal volume flow: 950 m³/h, noise level: 71 dB (A), number of revolutions: 2850 rpm, Dimensions W x D x H approx.: 525 x 592 x 781 mm, Weight approx.: 55 kg, Connected load approx.: 0.75 kW (400 V / 50 Hz),, colour: Grey

bar material dia.: 6 - 120 mm Bar length: 100 - 1.600 mm bar weight max.: 63 Kg feed length: 1.000 mm longitudinal adjustment: 600 mm machine weight ab.: 600 kg dimensions of the machine ca.: 2,2 x 1,5 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

LNS PB 80 / Bar Chamfering Machine / Sharpening Machine -CE marking - Chamfer diameter - 30 degrees 8-80mm - Chamfer diameter - 45 degrees 8-60mm -Turning diameter 10-60mm -Max turning length 40mm -2x speeds -Power 0.0-1.65 KW -Three-jaw chuck -Adjustable material support -Documentation Dimensions: LxWxH 1x0.7x1.6 meters / Weight 400 kg

IEMCA model 33 lathe bar loader

Bearing number: 3685 LOADER Manufacturer: Top Automazioni , Type: 337SX Machine NO.: BRS13122782 RE-S, Year of construction: 2013 Specifications: Stang dia. 6-37 mm rod length 3200 mm Length: 4500 mm, Høhe: , Width: , Weight: 1300 kg

Stock number: 3765 BAR FEEDER - LOADING MAGAZINE Manufacturer: IEMCA, Type: VIP 80 II - 16 Machine NO.: 0207370a01, Year of construction: 2007 Specifications: Max. Stang dia. 80 mm Min. Stang dia. 5 mm Stang length 1400 mm Length: 1900 mm, Height: 1500 mm, Width: 1000 mm, Weight: 520 kg

27 own barfeeds in stock or on arrival (Iemca-Lns-Top Automazioni) visit our website and ask for more details

Key data: 4200 mm, 25 mm, 25 mm

Bar feeder for multi-spindle lathe 8 spindles last attached to Gildemeister AS 16 / AS 20 Ø pitch circle 180 mm Guide channels 9/ 11/ 13/ 15/ 17/ 19/ 21 mm

Short-Loader Bar Ø 12-72 mm

Max. bar length 1,500 mm Bar diameter 4 – 85 mm Weight approx. 400 kg UNUSED!

Inv. Num. : 8916 Type: Maxis 62N Producer: IEMCA Created: 2007 Parameters: Maximum rod length: 3485 mm Rod diameter: 9-62 mm Weight: 770 kg

SERVO - Bar loading magazine HATEC AM 90 -Diameter range 4 - 65mm -Length range 100 - 1270mm -Feed of the working head 1300mm -Total power requirement 1KW -Drive - SERVO Drive -Control - CNC -Max. bar weight 40Kg -Various feed rods -DOCUMENTATION Dimensions: LxWxH 1.6x1.1x1.3 meters / Weight 250Kg

- Guide channel (oil-damped) - Max. bar length 3,200 mm - Included guide channel: D 52 mm (on request new sewer parts € 1,500,-, approx. 4 weeks) - Material slide length LL - Centering - last attached to Gildemeister Twin 32 - Weight approx. 900 kg - Dimensions LxWxH 4,000x700x1,200 mm

- Guide channel (oil-damped) - Max. bar length 3,200 mm - Included guide channel: D 52 mm - Material slide length L - Centering - Synchronous device - last attached to long-turning automat - Weight approx. 900 kg - Dimensions LxWxH 4,000x700x1,200 mm

- Max. rod length: 1,615 mm depending on the spindle of the automatic lathe - Material Ø: 5-80 mm - Material contact surface: 650 mm - Dimensions LxWxH: 2260 x 1200 x 1400 mm - Weight approx. 600 kg

- Guide channel (oil-damped) - Max. bar length 3,200 mm - Included guide channel: D 21mm - Material slide length L - Centering - Synchronous device - last attached to long-turning automat - Weight approx. 800 kg - Dimensions LxWxH 4,000x700x1,200 mm