LISSMAC smw used machines

The Posimat PB 80 is a pneumatically operated handling device. Version : with counterweight, suspended from on-site steel construction. Specifications: Load capacity: 120 kg; Hub; 1,600 mm; working range (radius) 2,600 mm; dead weight without counterweight and column: 150 kg The device was only in use for a few months.

Inv. Num. : 7225 Type: SBM - XS 300 G1E1 Producer: LISSMAC Created: 2015 Parameters: Hours: 166 Maximum sheet plate width: 15 mm Weight: 1400 kg

Material width: 1000 mm workable material thickness: 1-20 mm min. part length: 150 x 100 mm Required power: 4 x 4,8 kW Rotation speed: 1400 rpm Length: 2220 mm Width: 1500 mm Height: 1500 mm Weight of machine approx.: 1550 kg

Working hours machine: 5320 h max. working width: 300 mm workable material thickness: 1-15 mm Tension: 400V / 50 Hz Total power: 13,5 A Total current consumption: 7,5 kW Insulation class: IP42 Infinitely variable feed speed: 0-2 m / min Length: 2600 mm Width: 2300 mm Height: 1300 mm Machine weight: 1900 kg

A Lissmac steel brushing and deburring machine is available. Passage width: 1500mm, max. sheet thickness: 20mm, medium: brushing block, machine dimensions X/Y/Z: approx. 3100mm/1400mm/1800mm, weight: approx. 2300kg. Documentation available. On-site inspection is possible.

working width: 950 mm workpiece width - max.: 1,0 - 50 mm sandingbelt width: 970 mm sandingbelt length: 1900 mm weight of the machine ca.: 1,8 t The SMD 123 RE is a universal entry-level machine for all-round deburring Uniform edge rounding and surface grinding of sheet metal dry process. * Suitable for processing steel, stainless steel and aluminium. * The non-slip conveyor belt enables safe transport and the Machining even of small workpieces. * The two rotor heads ensure an all-round uniform Edge rounding and a directionless finish. * The intuitive operation via touch panel allows every employee get to grips with the machine quickly. * The SMD 1 models are installed and ready for operation in a short time. * The compact design saves valuable production space. * Low acquisition and operating costs lead to short amortization periods and guarantee economical processing of your workpieces ...

Extraction Lissmac Type: DD 3200 BJ 2014 for Deburring Machines

Fully functional.

max. working width: 1000 mm workable material thickness: 0,5 - 50 mm Total power: 82 A Total current consumption: 44,5 kW Insulation class: IP 42 Infinitely variable feed speed: 0-4 m / min Adjustment of material thickness: elektrisch Adjustment of tools: elektrisch Length: 3100 mm Width: 2100 mm Height: 2000 mm Machine weight: 3800 kg

This LISSMAC SBM-M 1500 B2 deburring machine was manufactured in 2014. Ideal for efficient deburring applications, it ensures consistent quality and performance. Consider the opportunity to buy this LISSMAC SBM-M 1500 B2 deburring machine. Contact us for more information.

This LISSMAC SBM-M 1000 B2 deburring machine was manufactured in 2012. It features an automatic material throughput with an aperture width of 1000 mm and can handle sheet thicknesses up to 20 mm. The machine is equipped with a powerful brushing motor and offers an infinitely variable feed adjustment. Weighing 2000 kg, its designed for robust and precise deburring operations. If you are looking to get high-quality deburring capabilities consider the LISSMAC SBM-M 1000 B2 machine we have for sale. Contact us for more information.

working width: 1500 mm workpiece width - max.: 0,5 - 50 mm dimensions: 3300 x 1500 x 1800 mm feed stepless: 0-4 m/min total power requirement: 20,4 kW weight of the machine ca.: 2800 kg The SBM-L G1S2 grinding and deburring machines were developed for double-sided deburring and edge rounding of workpieces in a single operation. LISSMAC machines are used for deburring sheet metal and processing sheet metal parts, laser parts, and stamped parts. The L series is equipped with three units on the top and bottom . Workpieces made of stainless steel, steel, aluminum or non-ferrous metal can be processed on the top, bottom or both sides. Processing sheet metal on both sides and rounding edges in a single operation saves up to 60% in time. It is also possible to easily connect automation solutions or integrate the machine into production lines. The machine design ensures ergonomic working and a p ...

working width: 1000 mm workpiece width - max.: 0,5 - 50 mm sandingbelt width: -- mm weight of the machine ca.: 2,5 t With the SBM-L 1000 G1S2, which works in the dry process, in alternating operation Steel, stainless steel and aluminum can be machined. She deburrs and rounds the edges on the outer and inner contours of punched, laser, fine plasma or water jet cut workpieces with a thickness of up to 50 mm on both sides in just one operation. * Two sanding units, 1 each on the top and bottom, remove spatter and slight burrs on outside and inside edges of sheet metal. * A total of four sanding belts, 2 each on the top and bottom Underside, process the sheets on both sides at the same time. here All edges are softened or rounded, depending on the tool settings. * Machining on both sides saves time-consuming turning of the workpieces and edit twice. * All pairs of aggregates can be switched  ...

material thickness: 0,5-50 mm material width: 1500 mm feed: 4 m/min Operating hours: 900 h weight of the machine ca.: t : dimensions of the machine ca.: m The machine was completely overhauled in December 2015The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical Description – SMW-Autoblok HFKN-D 165-45 A5 Designation: Three-jaw wedge-bar power chuck Manufacturer: SMW-Autoblok Model: HFKN-D 165-45 A5 Design: High-performance power chuck with wedge-bar actuation ?? Technical Data (typical for this model): Chuck diameter: 165 mm Central through-hole (bore): approx. 45 mm Mounting interface: A5 (DIN 55026) Actuation: Hydraulic (wedge-bar mechanism) Number of jaws: 3 (self-centering) Max. clamping force: approx. 45–60 kN (depending on hydraulic pressure) Max. speed: approx. 5000 rpm Repeatability: typically ? 0.01 mm Jaw type: Standard soft jaws or hard jaws, depending on configuration Subject to technical changes, errors, and prior sale.

Technical Description – SMW-Autoblok HFKN-D 165-45 A5 Designation: Three-jaw wedge-bar power chuck Manufacturer: SMW-Autoblok Model: HFKN-D 165-45 A5 Design: High-performance power chuck with wedge-bar actuation ?? Technical Data (typical for this model): Chuck diameter: 165 mm Central through-hole (bore): approx. 45 mm Mounting interface: A5 (DIN 55026) Actuation: Hydraulic (wedge-bar mechanism) Number of jaws: 3 (self-centering) Max. clamping force: approx. 45–60 kN (depending on hydraulic pressure) Max. speed: approx. 5000 rpm Repeatability: typically ? 0.01 mm Jaw type: Standard soft jaws or hard jaws, depending on configuration Subject to technical changes, errors, and prior sale.

consisting of two pieces of one type: KNCS-N-170-43 and HG-N-210-60-3 diameter one 170 mm and 210 mm Reference: Hercegfi - Lot 13 Weight: approx. 70kg Auction-ID: A7-46763-200

MAXIMUM SWITCHABLE LENGTH: 1520 MM MAXIMUM TROLLEY DIAMETER: 600 MM MAXIMUM SWITCHABLE DIAMETER: 540 MM AXLE STROKE X1:555 MM X2 AXIS STROKE: 185 MM Z-AXIS STROKE: 1595 MM STROKE Z2:1640 MM Y-AXIS STROKE: 160 (+-80) MM AXLE STROKE A: 1565 MM C1-C2 AXIS STROKE: 360 º (0.001) B-AXIS STROKE: 15-240 º (+-120) SPINDLE SPEED: 2800 RPM SPINDLE NOSE: ASA A2 # 8 CONTROL: FANUC 18I-TB COMPLETE WITH BEZEL SMW-AUTOBLOK

GeneralCNC Turning Centre; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways620 mmTransverse stroke260 mmLongitudinal stroke795 mmClamping chuck diameter max.315 mmWork spindle (left)Spindle bore91 mmSpindle diametre on front bearing140 mmMain drive 1Drive power (100% DC)22 kWSpeed range- 4000 rpmMax. torque (40% DC)525 NmTorque (100% DC)410 NmAccuracy at point stopping0,001 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (100% DC)10 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,03 x 2,2 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control)Y-Axis PartingTechnology cycle to parting off the workpiece by the Y-axis to ac ...

MAXIMUM SWITCHABLE LENGTH: 1520 MM MAXIMUM TROLLEY DIAMETER: 600 MM MAXIMUM SWITCHABLE DIAMETER: 540 MM AXLE STROKE X1:555 MM X2 AXIS STROKE: 185 MM Z-AXIS STROKE: 1595 MM STROKE Z2:1640 MM Y-AXIS STROKE: 160 (+-80) MM AXLE STROKE A: 1565 MM C1-C2 AXIS STROKE: 360 º (0.001) B-AXIS STROKE: 15-240 º (+-120) SPINDLE SPEED: 2800 RPM SPINDLE NOSE: ASA A2 # 8 CONTROL: FANUC 18I-TB COMPLETE WITH BEZEL SMW-AUTOBLOK

GeneralIntegrated Mill Turn Center; Control: Control F31iB5 with CELOS CharacteristicsSwing- Ø, max.700 mmMilling spindle upper side1 Bar diametre80 mmSpeed max.4000 rpmMax. Turning Length1530 mmMax machining diameter670 mmDrive power tool spindle5,5/3,7 kWDrive power milling spindle28/23 kWDrive power main spindle18,5/15 kWMovements X / Z200/1542 mmLower Turret10 PositionsNumber of Toolmagazine positions38 Speed max.12000 rpmSlewability of B-Axis±120 degreeMovements X / Z / Y675/1562/300 (±150) mmWeight approx.18500 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p(Left Spindle) through-spindle hole dia. 91 mm, 4,000min-1 (STD)(Left Spindle) Through-spindle Hol ...

General- partial hollow clamping device (hydraulic), - C-axis and spindle brake (hydr.) - upper compound slide with turning-/ milling spindle, with hydraulic locking reception HSK-A63, DIN 69893 - Y-axis ±210 mm - B-axis ±120º interpolating, Torque motor - tool magazine 36-fold disc magazine, ergonomic front load - absolute, direct measuring systems in X-, Y-, Z1-axis - cooling pump 6 bar;20 l/min,; Control: CELOS X with Siemens 840D SL Operate Main drive 1Drive power (100% DC)33 kWDrive power (40% DC)40 kWSpeed range- 4000 rpmTorque (100% DC)580 NmMax. torque (40% DC)700 NmC-Axis Speed-4000 rpmTorque of C-Axis (holding torque)1100 NmAccuracy at point stopping0,001 degreeWorking areaSwing diameter over guide ways700 mmTurning diameter630 mmClamping chuck diameter max.400 mmDistance between spindles2260 mmBar diameter max.102 mmTurning-milling spindleSpindle taperHSK-A 63 DIN 69 ...

Machine number: 291218 Center width: 760 mm Center height: 205 mm Spindle bore: 58 mm Main spindle Speeds 12: from 20 to 2000 rpm Spindle head mount: CAMLOCK 6 incl. two-axis digital display from the manufacturer FAGOR The machine is equipped with a tailstock, a Multifix turning steel holder and a three-jaw chuck from the manufacturer SMW AUTOBLOK, diameter: 200 mm and a steady rest Reference: Hercegfi - Lot 48

2-revolver turning center Guildmaster (DMG) Type: Twin 65 RG2 V5 Built: 2004 Control: Siemens 840 D Switch-on hours: 37,300 h Spindle hours: approx. 16,250 h Technical data: ----- - Spindle speed Hsp. & Gsp. max.: 5,000 rpm - Spindle bore S1 & S2: 79 mm - Power: 370 Nm at 40% ED - Rod passage Hsp.: 65 mm - Spindle nose: 2x 170H5 - Circulation max.: 250 mm - Rotates max.: 200 mm - Distance between spindles: 900 mm - Peak height: 1,288 mm - Slide path plan X1/X2/X3: 300/180/175 mm - Slide path along lengthZ1/Z2/Z3: 650/650/670 mm - 2x turret with 12 stations each, .. all driven, recording VDI 40 - 2x C-axis - Y-axis in the upper turret +/-40 mm - Part gripper with laxative belt internally - Chip conveyors - Automatic door - Total connection value: 85 kVA - Weight: approx. 10,500 Kg Accessories: ----- - Documentation - Holder package (fixed 20x + driven 1 ...

BRAND: HAAS YEAR: 2018 MODEL: DT-1 PRODUCTION HOURS: 3179 APPLICATION TYPE: MILLING LOCATION: NETHERLANDS MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: 01 01 2024 Technical Information CONTROL UNIT BRAND: HAAS MAIN DRIVE SPINDLE SPEED RANGE: 150000 1/MIN TOOL TAPER: BT-30 NUMBER OF AXIS: 5 Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - 21 TOOL WAREHOUSE - 20 BAR COOLING THROUGH THE SPINDLE / THROUGH-SPINDLE COOLANT READY + THROUGH SPINDLE COOLANT (TSC) - AIR THROUGH THE SPINDLE (THROUGH TOOL AIRBLAST (TAB) - 4TH AND 5TH AXIS DRIVE - WIRELESS INTIUITIVE PROBE SYSTEM - PROGRAMMABLE COOLANT NOZZLE - CHIP AUGER / CHIP CONVEYOR - HAAS CONNECT - DWO/TCPC (DYNAMIC WORK OFFSETS AND TOOL CENTER POINT CONTROL) - HIGH SPEED MACHINING OPTION QUALITATIVE MACHINE BENEFITS: - VISUAL PROGRAMMING SYSTEM - AUTOMATIC DOOR (DELIVERE ...