used LEUNIG eps

Power supply unit, converter, power supply, switching power supply unit, remote-controllable socket strip -Leunig: ePowerswitch EPS 4M+ -Voltage: 110 V -4 sockets: remote controllable -Incl. Accessories: see photo -Dimensions: 220/260/H55 mm -Weight: 1.5 kg

Power supply unit, converter, power supply, switching power supply unit, remote-controllable socket strip -Leunig: ePowerswitch EPS 4G -Voltage: 110 V -4 sockets: remote controllable -Incl. Accessories: see photo -Dimensions: 220/260/H55 mm -Weight: 1.6 kg

Power supply unit, converter, power supply, switching power supply unit, remote-controllable socket strip -Leunig: ePowerswitch EPS 4M+ -Remote control sockets: 4 -Dimensions: 225/110/H45 mm -Weight: 1.0 kg

Power supply unit, converter, power supply, switching power supply unit, remote-controllable socket strip -Leunig: ePowerswitch EPS 4G -Remote control sockets: 4 -Price: per piece -Number: 2 pieces -Dimensions: 225/110/H45 mm -Weight: 1.0 kg

Power supply unit, converter, power supply, switching power supply unit, remote-controllable socket strip -Leunig: ePowerSwitch-4 -Version: V.1.1.0.7 -4 sockets: remote controllable -Dimensions: 520/65/H45 mm -Weight: 1.2 kg

Pumps CP1 CP3 Fully-automatic test sequence in connection with KMA 802

BLUE BOX Epsilon Echos HP 37/ST 1PS Brand:BLUE BOX Type:Epsilon Echos HP 37/ST 1PS Stock number:M21-4507 Cooling capacity:35.6 kW Application:Cooling/Heating Number of fans:2 Refrigerant:R410A Refrigerant Content:9 kg Voltage:400 Volts Power consumption:13 kW Dimensions:1350 x 550 x 2100 mm Weight:460 kg Year:2016 Number in stock:1 piece(s) Price:On request Description: Nice air-cooled Bleu Box chiller/heat pump with 1 Copeland ZP154 scroll compressor on 1 circuit. This machine is equipped with a Carel micro C² SE controller and a hydronic module (water pump, expansion vessel and 140 liter buffer tank). Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. (Heating capacity: Q= 38.1kW, P= 11.9kW at +40/45°C and +7°C dry bulb, +6°C wet bulb). Please visit also our website: used-refrigeration

The machine was used very little, the total printing time is less than 50 hours. Accesories: - CN3D Smart Cabinet (base cabinet), operating hours: under 50 hours, Installation: 2022, Installation space in mm (x/y/z): 420×300×400mm, software: BCN3D Stratos slicing software, network connection: Offline printing: SD card / Online printing: WiFi or Ethernet, building material: BCN3D certified profiles for BCN3D filaments / open filament system, Layer thickness: 0.05-0.5mm, number of nozzles: 2, operating system: Microsoft Windows Server 2012 R2, Windows 7, Windows 8, Windows 8.1, Windows 10 (64 bit only), Windows 11 at least 4 GB RAM

Wire-O punching machine Make Bomco Model EPS-330 Year Working width 330 mm Tools 3:1 Wire-O tool with round holes Details Electric, other tools can be purchased Available direct

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Hopper opening 400x780mm Control panel with thermal motor protection only Available for: 3x230V / 50Hz or 3x400V / 50Hz 3x240V / 60Hz or 3x480V / 60Hz Capacity with fish boxes made of 25 kg/m3: 15-20 kg/h Capacity measured in fish boxes with lids (650 grams per piece: 23-30 boxes/h Wet boxes Non-corrosive Mobile on wheels Density 250-350 kg/m³ 2,2kW 3-phase 400 V/50 HZ480 V LxHxW 2220x1600x630 mm, Possible additions: exit tray, tub for tray, Stainless Steel version, See the chart below for more sizes, installed power : 2.2

Hopper opening 560x1000mm Control panel with thermal motor protection only Available for: 3x230V / 50Hz or 3x400V / 50Hz 3x240V / 60Hz or 3x480V / 60Hz Capacity with fish boxes made of 25 kg/m3: 110-130 kg/h Capacity measured in fish boxes with lids (650 grams per piece: 170-200 boxes/h Wet boxes Non-corrosive Mobile on wheels Density 250-350 kg/m³ 11 kW 3-phase 400 V/50 HZ480 V/60 HZ LxHxW 3700x1600x870 mm, Possible additions: removable bottom, removable bottom drawer, Stainless Steel version, See the chart below for more sizes, installed power : 11

Hopper opening 400x500mm Control panel Connection 1x230V / 50Hz 10 Amps. 1 phase (or two phases if no neutral) or 1×220-240V / 60Hz 10 Amps. 1 phase or 115V / 60Hz Capacity with fish boxes made of 25 kg/m3: 15-20 kg/h Capacity measured in fish boxes with lids (650 grams per piece: 23-30 boxes/h Dry boxes (for wet boxes a 3 phase machine is better) Non-corrosive Mobile on wheels Density 175-225 kg/m³ 1,5kW 1-phase 230/110 V 50-60 Hz LxHxW 1950x1600x630 mm, Possible additions : exit tray, tub for exit tray, Stainless Steel version, See the chart below for other sizes, installed power : 1.5

Hopper opening 400x500mm Control panel With thermal motor protection only available for: 3x230V / 50Hz or 3x400V / 50Hz 3x240V / 60Hz or 3x480V / 60Hz. Capacity with fish boxes made of 25 kg/m3: 15-20 kg/h Capacity measured in fish boxes with lids (650 grams per piece: 23-30 boxes/h Wet boxes Non-corrosive Mobile on wheels Density 250 – 350 kg/m³ 2,2kW 3-phase 400 V/ 50Hz 480 V/-60 LxHxW 1950x1600x630 mm, Possible additions: exit tray, tub for exit tray, Stainless Steel version, See chart below for more sizes, installed power : 2.2

Hopper opening 400x780mm Control panel Connection: 1x230V / 50Hz 10 Amps. 1 phase (or two phases if no neutral) or 1×220-240V / 60Hz 10 Amps. 1 phase or 115V / 60Hz 1 phase Capacity with fish boxes made of 25 kg/m3: 15-20 kg/h Capacity measured in fish boxes with lids (650 grams per piece: 23-30 boxes/h Dry boxes (for wet boxes a 3 phase machine is better) Non-corrosive Mobile on wheels Density 175-225 kg/m³ 1,5kW 1-phase 230/110 V 50-60Hz LxHxW 2220x1600x630 mm, possible additions: exit tray, tub for exit tray, Stainless Steel version, See the chart below for more sizes, installed power : 1.5

Hopper opening 560x1000mm Control panel with thermal motor protection only Available for: 3x230V / 50Hz or 3x400V / 50Hz 3x240V / 60Hz or 3x480V / 60Hz Capacity with fish boxes made of 25 kg/m3: 35-45 kg/h Capacity measured in fish boxes with lids (650 grams per piece: 50-60 boxes/h Wet boxes Non-corrosive Mobile on wheels Density 250-350 kg/m³ 4,0 kW 3-phase 400 V/50 HZ480 V/60 HZ Inlet opening 400×780 mm LxHxW 2900x1600x630 mm, Possible additions: removable bottom, removable bottom drawer, Stainless Steel version, See the chart below for more sizes, installed power : 4

Hopper opening 560x1400mm Control panel with thermal motor protection only Available for 3x230V / 50Hz or 3x400V / 50Hz 3x240V / 60Hz or 3x480V / 60Hz Capacity with fish boxes made of 25 kg/m3: 110-130 kg/h Capacity measured in fish boxes with lids (650 grams per piece: 170-200 boxes/h Wet boxes Non-corrosive Mobile on wheels Density 250-350 kg/m³ 15 kW 3-phase 400 V/50 HZ480 V/60 HZ LxHxW 4200x1600x870 mm, Possible additions: removable bottom, removable nottom drawer, Steinless Steel version, See the chart below for more sizes, installed power : 15

With combined pre-crushing and compaction of EPS material. Hopper opening: 300x490mm (11.8 x 19”). Control panel (1-phase) Connection: 1x230V / 50Hz 10 Amps. 1 phase (or two phases if no neutral) or 1×220-240V / 60Hz 10 Amps. 1 phase or 115V / 60Hz 1 phase. Capacity. Measured with fish boxes made of 25 kg/m3 density EPS 10-15 kg/h Wet boxes (it does work with wet boxes but less efficiently than a 3-phase model) Non-corrosive Mobile on wheels Density 140-225 kg/m³ 1,5kW 1-phase 230/110 V 50-60Hz Inlet opening 300×490 mm LxHxW 1850x1400x660 mm, Possible addition: exit tray, tub for exit tray, Stainless Steel version, See the chart below for other sizes, installed power : 1.5

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

For sale CNC milling machine Cielle Epsilon 130x150 year 2003 Spindle 3.6kW ELTE AF 90 CU 10/2 30,000 rpm Magazine for 8 tools, delivered with 12 tool holders Microlubrication Suction table and chip vacuum cleaner Remote Recommended for machining soft materials, PMMA, PVC, Dibond...

20pcs Pallet Stacking Machine Schwingshandl S-EPS-01 Used goods built in 2019, very good condition, see pictures Length: 160 cm Width: 200 cm Height: 246 cm Roll width approx. 88 cm Roll diameter approx. 9 cm Payload: 250 kg 4 pieces available. Negotiation price: from € 2.000,-/piece net ex location Depending on the purchase quantity and design Dismantling will take place from April to June 2024. Location: Northern Italy. Viewing possible by appointment. Further information on request. Partial sale possible. Systems are professionally dismantled and loaded. Transport and customs clearance can be carried out by us. Assembly and programming can be carried out by partner companies. EVERYTHING HAS to go! - from location to max. End of June 2024!! The following products of the plant are also available for sale: 300 x Dematic Multishuttle Strain Gauge 2 ...

EPS cutting line for 10 m blocks -Plate cutting with oscillating, automatic adjustment of the wire -Conveyor belts -Block alignment with page NG -Format editing (with automatically adjustable oscillation) -autom. Rinds acceptance (via conveyor belt) with breaker -Stacking The complex can be visited at any time by appointment. Other machines and components for the manufacture and processing of EPS are available.

EPS cutting line (production of panels from expanded polystyrene) suitable for net block dimensions: 5.20 x 1.20 x 1.0 meter Machines of part of by: Münchow and Hall/Brüser, KURTZ, Kottmann, Ganguly & Mues, DESCO Design for 2 man operation; 10 blocks per hour incl. block to Leger and block buffer incl. thickness cut incl. page NG including format station and Acceleration alley incl. upper plate inspection incl. stacking patterns / Federal truck including gravity Packer incl. palletizer (with pallet) including comprehensive documentation Visits to vote at any time. Various additional components and accessories in stock.

Horizontal wire saw for profiling of EPS boards Programming of CNC cutting image Application for EPS, XPS, PUR rigid foams Plate length: 1000 mm Board width: 500 mm Thickness: 80-200 mm Interpretation for approximately 17 m ³ production quantity per hour installed cutting image: hacking folding Visits by appointment at any time. Other machines and components for the production and processing of foams are available.