used KUPFERMUHLE dk

Kupfermühle 630/200

CATALOG NO. 7223 TECHNICAL DATA - max planing width 770mm - max planing height on both sides 200mm - maximum planing height on four sides 100mm in advance: - pulling, toothed input shaft - pawls - 2 rows of pressure - pulling shaft, toothed - pressure - planing shaft 770mm, 4-knife 7.5kW - pressure - pulling, smooth, output shaft from down: - guide strip - introduction table with a divided sliding shaft - introductory tabletop adjustable up/down - planing shaft 770mm, 4-knife 5.5kW - 2 smooth, pulling, adjustable shafts in the back: - 2 side spindles + clamps 1) vertical right 100mm 4kW 2) vertical left 100mm 4kW - spindle diameter 35mm - spindles adjustable up/down, right/left - electric setting of planing thickness - 4 types of feed speeds 6;9;12.5;18 m/min - 2kW feed motor - diameters of the exhaust pipe: 2x120mm, 2x180mm - dimensions length/width/heigh ...

CATALOG NO. 7186 TECHNICAL DATA - max planing width 510mm - max planing height on both sides 170mm - maximum planing height on four sides 100mm *in advance: - pulling, toothed input shaft - pawls - pulling shaft, toothed - pressure - planing shaft 510mm, 4-knife (2 knives installed) 4kW - pulling, smooth, output shaft *from down: - guide strip - sliding roller – adjustable top with an up/down roller - planing shaft 510mm, 2-knife 4kW - 2 smooth, sliding, adjustable shafts *in the back: - 2 side spindles + pressure - 1) vertical right 100mm 2.35kW - 2) vertical left 100mm 2.35kW - spindle diameter 35mm - spindles adjustable up/down, right/left - manual setting of planing thickness - 4 types of feed speeds - feed motor 1.5kW - dimensions length/width/height 1940x1320x1140mm - weight 1330kg ADVANTAGES – ideal for processing logs, floor tiles, etc. –  ...

Four-side planer KUPFERMUHLE 600x200mm - after technical review - German production - PLANING HEIGHT ON TWO AND FOUR-SIDES 200 mm - ideal for wet wood - electric height adjustment - electric adjustment of the left head - double feed chain planing width 600 mm planing height on two and four sides 200 mm power of vertical spindle motors 2 x 8.6 kW motor power of the lower shaft 5.5 kW upper shaft motor power 7.5 kW guiding ruler electric height adjustment adjustable vertical heads four upper pulling rollers four lower pulling rollers two take-up pull rollers 4 knives per shaft diameter of shafts 150 mm six types of feed speed 7 / 9 / 11.5 / 14 / 18 / 23 m/min row of anti-recoil pawls spindle diameter 30 mm / 100 mm material pressure at the left head dimensions (length/width/height) 260 x 190 x 205 cm weight 3500 kg

KUPFERMUHLE four-sided planer with additional table, multi-saw 600x200mm - after technical inspection - German production - DOUBLE-SIDED PLANING HEIGHT 200 mm - ideal for wet wood - electric height adjustment - double feed chain - additional preliminary table with a 340 mm head - additional material feed systems TECHNICAL PARAMETERS: planing width 600 mm cutting height on both sides planing height on four sides 200 mm 100mm power of vertical spindle motors 2 x 5.5 kW lower shaft motor power 7.5 kW upper shaft motor power 11 kW engine power of the first head 4 kW multi-saw engine power 15 kW adjustable vertical heads four upper pulling rollers three lower pulling rollers two receiving pull rollers 4 knives per shaft, shaft diameter 145mm six types of feed speeds 7 / 9 / 11.5 / 14 / 18 / 23 m/min 2 rows of anti-kickback pawls spindle diameter 40 mm disc  ...

Double flat clip machine DKF 15/15 overhauled 2009 - see display category Packaging machines -

Gearmotor Bauer DK940 AH/241 - used - MANUFACTURER´S DATA Bauer DK940 AH/241 output: 2,0 PS Motor speed: 1400/121U/min tension: 380Δ/Y protection class: IP65 shaft: 25mm CONDITION+HISTORY • operational standby-motor out of a company breakdown • shaft rotates, no further operation tests • condition see photos INSPECTION Motor can be inspected at any time. TERM´S OF DELIVERY Ex works DE - 83395 Freilassing, free on truck. COLLECTION By agreement Please feel free to contact us for any further questions! Project Organisation Alexander Torlach GmbH Breslauer Str. 41a 83395 Freilassing phone: +49(0)8654-77669-0 fax: +49(0)8654-77669-15 info@torlach

One used 2650 KVA AEG 5250V alternator ( generator end ) for sale. The alternator is in a good running condition. He was driven by a AEG Kanis G20 back pressure steam turbine. The location is our warehouse in solingen, germany. Brand: AEG Type: DKBH 4565/04 voltage: 5250V Electrical power: 2650 KVA RPM: 1500 rpm Year of construction: 1983 Weight: 8 tons Price on request: Here you can download the alternator pictures: (6 MB) abc.stromerzeuger-discount.de/Generator_2650KVA_5250_Volt_AEG/Generato r_DKBH_4565-04_AEG_2650_KVA_AEG_5250_Volt.zip Call us : 0163/5263546

Indramat Module DKC043-040-7-FW Bosch Rexroth

Atomatische hem saw with EWD DK90 - DendroMaskin feed table Board length 1-6m Board width of min. 45 mm of to 550 mm (bore 800 mm) Cutting height up to 160 mm feed from the right + Splinters separator with 2 blades + Pull-out roles for page items PLC SIMATIC S5 full modular Performance: Approx. 11 boards per minute selection:-NG 4-55 cm -Fixed widths of all kinds -Lattenschitt -Fixed widths + slats -Cut can be retrofitted

; Mileage [km]: 6; Power [PS]: 275

; Mileage [km]: 6; Power [PS]: 260

; Mileage [km]: 6; Power [PS]: 285

Technical data: Double column vertical turret lathe CNC control Siemens 802 D Weight 66 to 63 kw Dimensions 13,600 x 9,800 x 6,750 mm Faceplate diameter 3,500 mm Maximum workpiece height 2000 mm Max support adjustment 30 ° Maximum workpiece diameter 4,000 mm Maximum workpiece diameter with page support 3,750 mm Number of support 2 Max turning height 1,400 mm Maximum workpiece weight 25 to Max speed 30/min Min. speed 1/min

Manual Edger Esterer EWD DKV with task table good condition ! Immediately available !; Well

Esterer DKV 1 movable shaft ! feed hydraulically hydraulic and electrically roller lift: hydraulic power: 55 kW Year construction year: approx. 1982 passage: 750mm = width, 160mm = height 2 x directional laser incl. approx. 15 Circularsaws including with Splitter unit * screw roll; good

For sale is a complete frame sawmill as listed below. (Single sale also possible, please register in advance) An annual cut of up to 60,000 solid cubic metres of round timber is possible with the system. With a log length of 4 metres, the current annual cut is approx. 30,000 solid cubic metres in 1-shift operation. The facility is still in operation and can be visited by appointment. Machine Listing: 01. Log feed 4-strand SPRINGER with separator with roller conveyor with log turner with insert 02. Clamping carriage remotely controlled ESTERER Type: FHZ SV Built in 1990 Track width: 110 cm with auxiliary wagon with cabin 03. Frame saw ESTERER Type: HDS Built in 1973 600 stroke max. passage 71 cm with splitting wedge with drive motor 132 kW with front gear with hydraulic saw clamp with saw blades with hook-up 04. Frame roller conveyor Mayrhofer w ...

High capacity oil cooler, Schimpke prod., type DK68V / 50, 6200 kcal/per hour, oil Durchflus 36 - 51Ltr rpm installation _ compressor, fan, .uber filters extraction.

We sell 10 x Raritan DKX3 216 6 x Raritan DSXA 16 DL 1 x Raritan DKX3 032 2 x Raritan DKX3 832 50 x Raritan Dongles In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many other refurbished/used hardware available from the areas of the systems mentioned here as well as from other systems of these manufacturers: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at a reasonable price from HASCON! The sale is only made to companies. We have available complete  ...

Vertical Lathe WMW NILES DMF 6300 Condition: Very good, complete Technical details: Turning diameter: 6300 mm Turning diameter, with side-support: 6000 mm Degrees displacement of the vert. supports: +/-30 ° Displacement of the side-support: 1800 mm Workpiece height max. : 2500 mm Workpieceweight max. : 50000 kg Chuck diameter: 5300 mm Speedrange: 0.35-14 rpm Feeding speeds (16): 0.063-11.2 mm/omw. Rapid speed of the supports: 1000 mm/min ¬ ¹ Rapid speed of the side-support: 500 mm/min ¬ ¹ Connection power: 120 kW Dimensions of the machine W: 14.40 x 8.20 x 8.70 m Weight of the machine ca.: 174.000 kg

Block vane vacuum pump LEYBOLD DK200 is after the overhaul: absolutely mint condition According to manufacturer specifications verified so all games and mass in the tolerances are with new wear parts available at short includes one year warranty LEYBOLD DK200 rotary piston pump pumps will: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included a one-year warranty

Block vane vacuum pump LEYBOLD DK200 is after the overhaul: absolutely mint condition According to manufacturer specifications verified so all games and mass in the tolerances are with new wear parts available at short includes one year warranty LEYBOLD DK200 rotary piston pump pumps will: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included a one-year warranty

Leybold DK200 locking slide vacuum pump is after the general overhaul: absolutely new checked according to manufacturer specifications, so all games and dimensions are in the tolerances equipped with new wear parts available at short notice includes one year warranty Leybold DK200 Rotary Piston Pump pumps wants: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty

Leybold DK200 locking slide vacuum pump is after the general overhaul: absolutely new checked according to manufacturer specifications, so all games and dimensions are in the tolerances equipped with new wear parts available at short notice includes one year warranty Leybold DK200 Rotary Piston Pump pumps wants: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty

Cooling output: 11,000W, max. operational pressure: 30bar, connected load: 6.5kW, an inspection is possible.