We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
bore capacity in steel (diameter): 45 mm arm length: 325 / 1000 mm workpiece height max.: ca. 1000 mm spindle taper MT: 4 spindle turning speed range: 40 - 1700 U/min feeds: 0,125 - 1,25 mm/U distance spindle/base plate: 385 / 1400 mm quill stroke: 325 mm crossrail adjustment vertical: 700 mm : 360 ° boring head horiz. adjustable: 675 mm base plate surface area: 1300 x 800 mm total power requirement: 6,2 kW weight of the machine ca.: 3,8 t - autom. feed - right-/left spindle run Accessories: box table 1000 x 750 x 500 mm, hydr. vice, width of jaws 200 mm, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
bore capacity in steel (diameter): 55,0 mm arm length: 1750 mm workpiece height max.: 1630 mm turning speeds: 19 - 1320 U/min bore spindles - Morse Taper: 5 MK engine output: 5,5 kW weight: 5 t range L-W-H: 2,4 x 1,0 x 3,55 mm feed movement: 475 mm floor plate size:: 1650x1000 mm feeds: 0,07-2,9 mm/U The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Drilling capacity: 110 mm Radius: 2500 mm Spindle taper: 0 Make Kolb RH 110 mm Type RH Model RABOMA Year 1989 radial drilling machine kolb radiaal boormachine Tapping capacity (mm) M 78 Drilling capacity (mm) 110 Distance Column/center (throat) mm 2.500 mm Tapping depth (mm) Mk 6 / 600 Power 10 kW
used
Injection molding machines of types VRC 601 must exclusively be used for the filling of molds with various kinds of plastic materials. Other uses will be deemed a violation of the intended use and exempt U. Kolb GmbH from being held liable for injuries and damage to persons and/or property. Strictly observing the safety instructions and notes issued by U. Kolb GmbH is also mandatory and forms part of the intended use provisions to be adhered to.
used
CNC double-staender coordinate drilling rig with deep drilling support Kolb KBN G 120 year 1984 / Converted to Heidenhain TNC 426 in 2006 table size 4250 x 2200 mm Table load 14 t Table laengsweg X 3000 mm Main Spindle crosspath Y 2180 mm deep drilling spindle crossing path A - 2000 mm spindle vertical path 500 mm Distance between the stems 2640 mm; spindle - table 100 - 1300 mm; spindle diameter 224 mm Spindle drive power 46 kW spindle speeds 14 - 1400 rpm spindle holder ISO 50 Drilling in steel ST60: 100 mm diameter; drill up to 300 mm; threaded cutting up to M 125 x 3; frard power 730 cm3r/min.; SECOND SUPPORT SUPPORT: spindle speeds at BTA and ELB drilling 315 - 3150 rpm high high pressure oil Offer number V(B)-5234; Very good
used
CNC Double column Coordinate Boring Machine with Deep Hole Drilling Support Kolb KBN G 120 Year of manufacture 1984 / Retrofitted with Heidenhain TNC 426 in 2006 Table size 4250 x 2200 mm Table load max. 14 t Table longitudinal travel X 3000 mm Main spindle cross travel Y 2180 mm Deep hole drilling support cross travel A - 2000 mm Spindle vertical travel Z 500 mm Distance between the columns 2640 mm; Spindle to table 100 - 1300 mm; Spindle diameter 224 mm Spindle drive motor rating 46 KW Spindle speeds 14 - 1400 rpm Spindle taper ISO 50 Drilling in steel ST60 : 100 mm diameter; Boring to 300 mm; Threading to M 125 x 3; Milling capacity 730 cm³/min.; Second support for Deep Hole Drilling Spindle speeds for BTA and ELB boring 315 - 3150 rpm High pressure cutting oil delivery to spindle Chip- and oil collection and separation via Centrifuge. Very good condition P ...
used
Tool grinding machine make HAHN & KOLB type WS 54Year of construction 1975gr. workpiece diameter: 200 mmgr. clamping length between the tips: 230 mmMounting cone: MK 5Gr. grinding length: 110 mmCrossfeed: 140 mmPivoting the workpiece spindle head: +/- 7.5 °Swiveling the angle head horizontally and vertically: +/- 90 °Speeds of the grinding spindle: 4450 - 31000 rpm.Grinding wheel diameter: 125 mmMotor power: 0.55 kWDimensions L x W x H: 1400 x 1000 x 1500 mmMass. approx: 500 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
HYDRAULIC - LAPPING MACHINE - LHD0 / Hahn&Kolb Largest lapping disc diameter approx. 400mm Largest workpiece length approx. 100mm B2pwrlepqw Largest distance between the cast lobe discs approx. 80mm Greatest distance between the lapping grinding wheels approx. 55mm Lapping grinding wheel speed (average)40/80/160 rpm Speeds - main drive motors approx. 700/1400/2800 rpm Total power 1.8 -2.7 KW Optional accessory: Lap cage - steering device Adjustable suspension (one-sided lapping device) Planetary lapping device Reduction gears Coolant reservoir Turning device - manually operated Cast-iron pick-up plates Dimensions: L x W x H approx. 1.4 x 1.3 x 1.9 metres Weight approx. 1500kg
used
: KOLB A30 length: 300 mm tool adaptor: mit SK40 und SK50 Fuß : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
There are ten Automatic Lathes Hahn & Kolb DM 127 available, five more machines are available as spare parts donors, documentation, spare parts and accessories available, have been regularly serviced, inspection is possible.
used
Multi-edge lathe Multi-edge lathe Manufacturer: Hahn + Kolb Type: TORNOMAT 2 Year of construction: 1981 Working range 6-edge: 3 – 36 SW mm Working range 4-edge: 3 – 24 SW mm Maximum turning length: 60 mm hydraulic feed per revolution: 0 – 0.5 mm Rotor speed: 250 / 335 / 450 rpm. Hydraulic pump: 23 l /min. Pressure hydraulic system max.: 45 bar Oil filling 36 cSt/50° C: 125 liters Motor for lubrication pump: 1000 min. -1 Weight without accessories: approx. 1300 kg Space requirement without control cabinet: 1530 x 670 mm Accessories: Collets Knife head
used
Multi-turn lathe make HAHN & KOLB type TORNOMAT 2Masch. -No: 668273 Year 1973Working area hexagonal: 3 - 36 mmWorking area 4-edge: 3 - 24 mmhydr. Feed per revolution: 0 - 0.5 mmRapid traverse: 3.7 m / min.Switching time: 1.0 sec.Speed of the rotor: 250/355/450 rpm.Speed of the spindle: 2250/3200/4050 rpm.Drive power: 2.2 / 1.5 kWWeight approx: 1.25 tOutside dimensions approx: 670 x 1530 x 1220 mmWith- Electric control cabinet- Accessories and tool cabinet complete with content- Cabinet with collets- conveyor beltused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Hardness tester, hardness measuring machine, hardness tester, hardness tester, impact hardness tester -Handover: in the current condition as viewed -Tool kit: not complete -Hahn & Kolb: mobile hardness tester -Individual components: see photos -Dimension box: 355/190 / H95 mm -Weight: 5.4 kg
used
Inv. Num. : 7187 Type: Varimat VD 2000 Producer: KOLB Created: 1995 Parameters: Operating system: SIEMENS Sinumerik Axis X: 6000 mm Axis Y: 2400 mm Z axis: 1100 mm Weight: 83000 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 26 mm -Attachments: Hahn+Kolb -Dimensions: see photo technical. drawing -Total dimensions: 110/90/H75 mm -Total weight: 2,8 kg
used
Key data: 5500 mm, 4250 mm, 1250 mm
Kolb PFC 2500 portal milling machine, Built in 1996, Siemens Sinumerik 880 control system, Travel X/Y/Z 5500/4250/1250 mm, Clamping surface 2500 x 4000 mm, max. table load 20,000 kg, Tool changer 190 times, Adapter SK 50, separate cooling unit, Conveyor coolant preparation, Bandpass filter Interchangeable pallet 2500 x 4000 mm,
used
Key data: 5500 mm, 4250 mm, 1250 mm
Kolb PFC 2500 portal milling machine, Built in 1994, Siemens Sinumerik 850 ME control system, Travel X/Y/Z 5500/4250/1250 mm, Clamping surface 2500 x 4000 mm, max. table load 20,000 kg, Tool changer 190 times, Adapter SK 50, separate cooling unit, Conveyor coolant preparation, D7t7fp0 Bandpass filter Interchangeable pallet 2500 x 4000 mm,
used
Inv. Num. : 7411 Type: R6-5000 Producer: Kolb Created: 1981 Parameters: Grinding diameter: 605 mm Maximum weight of the workpiece: 3000 kg Distance between tips: 5000 mm Machine weight: 17900 kg
used
Description: Parallel gauge block '100' from Kolb & Baumann (KOBA), product information: Dimensions 100x 30 x 9 mm, including transport box, quantity = 1 piece Approx. Onsite Dimension. (l x w x h): 140 x 65 x 45 mm, weight approx.: 1 kg
used
: Hahn & Kolb A200 thickness of jaw: 200 mm : 160 mm hydraulic: ja weight of the machine ca.: 200 kg ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++ The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Aufspannflaeche 3,000 x 2,000 mms table height 1,150 mms
Kolbe K 220 bandsaw, table version. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.
Kolbe K 300 band saw, stand-alone-version. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.
used
<br>Gathering machine Clamping element with manual installation 20 stations TO 803 20 Controls Wrong & double sheet control Intermediate modules Installation element Hand system Adhesive Binder 20 pliers Vibration station Peace table Folding Anpre station S-FR and roughened station Popular B Hotmelt R ckenleimwerk Squeegee control Hotmelt side glue works Premelter Gauze station Scales cover feeder Groove Station 2 to 6 times Handling pressure Niederlegevorrichtung<br><br>Still in operation: No.<br>Available: immediately
used
<br>Gathering machine Clamping element with manual installation 20 stations TO 803 20 Controls Wrong & double sheet control Intermediate modules Installation element Hand system Adhesive Binder 20 pliers Vibration station Peace table Folding Anpre station S-FR and roughened station Popular B Hotmelt R ckenleimwerk Squeegee control Hotmelt side glue works Premelter Gauze station Scales cover feeder Groove Station 2 to 6 times Handling pressure Niederlegevorrichtung<br><br>Still in operation: No.<br>Available: immediately