used KLINGELNBERG knc

The Klingelnberg KNC 60 bevel gear milling machine was developed as a universal machine for the production of bevel gears in the field of agricultural machinery, construction machinery, wind power gearboxes, machine tools, mining technology, aircraft, textile machines, etc. It can be used for individual production, small series production as well as for mass production. Figure shows KNC 60 in the actual state, can be used as a used machine or as a CNC conversion, completely modernized, designed for highest performance and accuracy with flexible production, acceptance according to DIN and manufacturer standard, control SINUMERIK 840 D SL; digital drive technology SINAMICS. Technical data Klingelnberg KNC 60 CNC Wheel diameter - max 650 mm Largest tooth width 120 mm Module 2.2-12 mm Number of teeth 5-120 Hypoid offset +/- 100 mm Applicable knife head radii 55, 100, 135, 170, 2 ...

max. wheel diameter: 275 mm gear width: 150 mm max. module: 6 min. module: 1,5 total power requirement: 62 kW weight of the machine ca.: 12 t dimensions of the machine ca.: 4,7x4,4x2,45 m max. wheel diameter mm gear width mm max. module 6 min. module 1.5 max. workpiece diameter 275 mm tooth width max. 5.5 mm spiral angle 0 - 60 ° number of teeth 5 - 120 transmission ratio min. 1:1 transmission ratio max. 1:10 milling drive motor 20 kW workpiece drive 14.5 kW total power requirement 62 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 [...] Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 [...] - wo ...

max. wheel diameter: 275 mm gear width: 150 mm max. module: 6 min. module: 1.5 max. workpiece diameter: 275 mm tooth width: max. 5.5 mm spiral angle: 0 - 60 ° number of teeth: 5 - 120 transmission ratio min.: 1:1 transmission ratio max.: 1:10 milling drive motor: 20 kW workpiece drive: 14.5 kW total power requirement: 62 kVA weight of the machine ca.: 12 t dimensions of the machine ca.: 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 r.p.m. Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 r.p.m. - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel ...

Used machine more information will follow...

The Klingelnberg PKE140 bevel proofing machine is designed for the universal rolling test of bevel gears, crown wheels and gears. Here, gearingcans can be tested and evaluated conventionally by means of single-flank and two-flank rolling test. Description: The wheels are clamped by means of a threaded rod, (spindle bore 30H4) With the device you can check the support image, the axis distance and the swivel angle are adjustable by means of the final dimensions and the measuring clock. The device is also suitable for 2-flank testing and flank play measurement, evaluation by means of 0.01 measuring clock. The drive is carried out by handwheel. 1.Technical parameters Maximum diameter of the wheel 140 mm Built-in size, maximum 90 mm Adjustment angle, adjustable baar 50 - 140 degree Spindle bore wheel 30 H4 Spindle hole pinion MK4 Measuring clocks Mitutoyo Figure shows us ...

The Klingelnberg PSKE 900 bevel wheel tester is designed for universal flank rolling testing of bevel gears and crown wheels. Here, gearing can be measured by means of single-flank and two-flank rolling test and evaluated graphically. These test methods are particularly suitable for determining faults in gear geometry such as round and flat running properties, rolling deviations or division errors. Here, a practical installation situation of a gearing outside the gearbox is simulated under real load conditions and subsequently evaluated. Deviations in gear geometry, machining errors due to defective tools as well as damage to the gears can thus be detected and eliminated before assembly. The following parameters can be measured here: In-flank deviations Fi', fi', fl', fk' Backlash Circular, roundness (option) Carrying image with digital camera Split variances FFT Analysi ...

Circulation cutter from Klingelberg

max. wheel diameter: 2500 mm gear width: 0 mm max. module: 34 min. module: 1 total power requirement: ca. 15 kW weight of the machine ca.: 15 t dimensions of the machine ca.: 4,20 x 2,00 x 2,90 m Extra große ZR-Prüfmaschine, Gegenhalter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

external diameter: 103 mm bore diameter in mm: 32 mm width: 108 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Complete production line consisting of a bevel gear milling machine Klingelnberg AMK 852, with various knife heads for soft and hard toothing, as well as bevel gear test mesh for sale. Figure shows used machine in the actual state Scope of application / technical data Wheel diameter - max 900 mm Largest tooth width 120 mm Module 16 mm Take advantage of the advantages that speak for the use of the complete Klingelnberg AMK 852 production line: » Individually applicable for individual part and prototype production » Can be delivered as a used machine, partially modernized or new as a retrofit » Available at short notice....... » short cycle times » Installation, training and commissioning can also be offered *Information, data and illustrations are non-binding, subject to prior sale

max. wheel diameter: 1600 mm gear width: 250 mm max. module: 20 min. module: 1,5 base circle dia. - max.: 1450 mm base circle dia. - min.: 150 mm specimen weight from/to: 4000 kg feeler adjustment movement - parallel: 1400 mm max.helical angle: 0 - 90 ° wheel diameter with counterstay: 1000 mm feeler adjustment movement - parallel: 800 mm centre height: 1150 mm electrics - voltage/frequency: 400 / 50 V/Hz dimensions of the machine ca.: 2,8 x 2,4 x 2,3 m total power requirement: 2 kW weight of the machine ca.: 3 t Universal Involute and Helix Testing Machine - modernized 1995 Machine is suitable for measuring all individual tooth data on straight and helical spur gears, and shaping and shaving cutters. Following tooth data can be tested: Tooth flanks, Involute base circle dia. and pressure angle, Profile c ...

The Klingelnberg GKC 60 CNC bevel gear testing machine is designed for the universal single-flank rolling test of bevel gears, crown gears and gears and was developed and manufactured taking into account the latest knowledge and experience in the field of measurement technology. Here, gears can be measured and graphically evaluated by means of single-flank and two-flank rolling testing. These test methods are particularly suitable for the determination of errors in the gear geometry such as concentricity and plane running properties, rolling deviations or pitch errors. A practical installation situation of a gear outside the gearbox under real load conditions is simulated and then evaluated. Deviations in the gear geometry, machining errors due to defective tools as well as damage to the gears can thus be detected and eliminated even before assembly. The following parameters can be  ...

max. wheel diameter: 275 mm gear width: 55 mm max. module: 6 min. module: 1 Control: 840 C Siemens total power requirement: 100 kW weight of the machine ca.: 16,7 t dimensions of the machine ca.: 5,2 x 2,3 x 2,4 m m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 400 mm gear width: NA mm max. module: 1 min. module: 10 total power requirement: 12 kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: m K L I N G E L N B E R G (Germany) Automatic Bevel Gear Lapping Machine Model LKR 400 A 100 Year 1974/1998 Serial No. 1890 Partially reconditioned and electrically modernized in 1998 by Welter Company _______________________________________________________ Max. Ø of crown gear 400 mm Adjustment of pinion spindle 160 / 250 mm Adjustment of crown gear spindle 115 / 265 mm Additional movements: Axial / distance / vertical, approx. + / - 2 mm Automatic tooth clearance 0 - 0.6 mm Module 1 - 10 Axial offset, up / down, each 50 mm (= axial offset travel from middle position) Bore hole of driving spindle 100 taper Bore hole of driven spindle 60 taper 6 spindle speeds 900 - 1,800 rpm Total ele ...

Threaded screw grinding machine Klingelnberg HNC35 S CNC General description: This 7-axis CNC grinding machine is used for grinding single- and multi-speed screws and threads. In conjunction with the Universal CNC roll forming device, almost any profile shape can be produced. It can be used for individual production, small series production as well as for mass production. Figure shows used machine completely modernized as a retrofit, designed for maximum performance and accuracy with flexible production, acceptance according to DIN and manufacturer standard, control SINUMERIK 840 D SL; digital drive technology SINAMICS. Technical data Klingelnberg HNC 35 S Largest workpiece feeder (grindable) 350 mm Largest grinding length 660 mm Largest workpiece clamping length 950 mm Smallest / largest module 16 mm Tip height 180 mm Largest gear width 330 mm Gear range 1-99 Slop ...

external diameter: 128 mm bore diameter in mm: 40 mm width: 130 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 275 mm gear width: 55 mm max. module: 6 min. module: 1,5 control: Sinumerik 840C tooth width: 5,5 mm spiral angle: 0/60 ° max. number of teeth: 120 min. number of teeth: 5 transmission ratio max.: 1:10 transmission ratio min.: 1:1 spindle speeds: max. 110 mm blade head turning speeds: 20-110 1/min total power requirement: 100 kW weight of the machine ca.: 16700 kg dimensions of the machine ca.: 5200x2300x2400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The Klingelnberg PSKE 900 bevel gear testing machine is designed for universal single-flank rolling testing of bevel gears and crown gears. Here, gears can be measured and graphically evaluated by means of single-flank and two-flank rolling testing. These test methods are particularly suitable for the determination of errors in the gear geometry such as concentricity and plane running properties, rolling deviations or pitch errors. Here, a practical installation situation of a gear outside the gearbox is simulated under real load conditions and then evaluated. Deviations in the gear geometry, machining errors due to defective tools as well as damage to the gears can thus be detected and eliminated even before assembly. The following parameters can be measured here: Single flank deviations Fi', fi', fl', fk' Backlash Concentricity, Roundness (option) Bearing image with digita ...

external diameter: 80-210 mm bore diameter in mm: 32-60 mm width: 90-270 mm different sizes from Module 2-14 mm available! More details upon request. Price per module. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 160 - 1.600 mm gear width: 250 mm max. module: 20 min. module: 1,5 total power requirement: 1 kW weight of the machine ca.: 3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

external diameter: 113 mm bore diameter in mm: 32 mm width: 130 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

external diameter: 118 mm bore diameter in mm: 40 mm width: 157 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

external diameter: 112 mm bore diameter in mm: 32 mm width: 130 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

external diameter: 106 mm bore diameter in mm: 32 mm width: 108 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

external diameter: 88 mm bore diameter in mm: 27 mm width: 91 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.