KLAEGER hk used machines

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Manufacturer: Klaeger, pipe bending tool for profile bending machine -Type: R1/2 -Hole: Ø 30 mm -Dimensions: see photos -Dimensions: 86/57/H56 mm -Weight: 1.1 kg

cutting diameter: 200 - 280 mm band length: 400 - 500 mm stroke: - mm total power requirement: 2 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 3 LM m Package 5 x hacksaw / hacksaw machine / untested - partly in need of repair / spare parts carrier - 0278: RUCOCO RBS 280 A / Ø 280mm - automatic machine - 0664: SILISTRA HN 25 M / Ø 250 mm / saw blade 500 mm - 2395: BEHRINGER Super A-275 / Ø 275 / saw blade 450 mm / automatic machine - 3674: BEHRINGER Super 215 PU 2 / Ø 215 / saw blade 400 mm - 5708: KLAEGER / Ø approx. 210 / saw blade 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting area round/square: 190/190 x 190 mm Cutting area in mitre 45° round/rectangle: 140/190 x 140 mm Saw blade dimensions: 400 x 32 x 1.5 mm 1 Lifting speed: 85/min Drive motor: 380 V, 0.37 kW Weight: 126 kg Space requirement: 1200 x 600 x 980 mm

Offer 24477 Technical data: - Cutting range at 90° around 220 mm - flat 250 x 100 mm - Square 170 x 170 mm - Cutting range 45° around 150 mm - flat 150 x 150 mm - Mitre adjustment left + right - Saw blade dimensions 2890 x 27 x 0.9 mm - Cutting speeds 40 + 60 m/min - Hydr. lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 1.5 kW - Space requirement approx. W 1500 x H 1000 x D 650 mm - Weight approx. 250 kg

Offer 24477 Technical data: - Cutting range at 90° around 220 mm - flat 250 x 100 mm - Square 170 x 170 mm - Cutting range 45° around 150 mm - flat 150 x 150 mm - Mitre adjustment left + right - Saw blade dimensions 2890 x 27 x 0.9 mm - Cutting speeds 40 + 60 m/min - Hydr. lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 1.5 kW - Space requirement approx. W 1500 x H 1000 x D 650 mm - Weight approx. 250 kg

I - beam section - flat steel: 120 x 20 (d 750) mm I-beam section - upend: 60 x 10 (d800) mm L-beam: 50 x 5 (d 1200) mm bar material - diameter: 35.0 (d 800) mm bar material dia. max.: 70 x 3.0 (1200) mm : 50.0 mm diameter of upper rolls: 155 mm diameter of lower rolls: 155 mm Stroke length: 150 mm Rotating speeds: 9.0 U/min total power requirement: 1.3 kW weight: 305 kg range L-W-H: 900 x 700 x 1500 mm Features: - Robust electric-motor-driven ring/profile bending machine - Machine base frame with rear storage shelf - Can be used in both horizontal and vertical orientations - Equipped with a wide variety of roller sets * Split roller segments * Pipe rollers - Electro-hydraulic feed of the upper roller - Manually adjustable side/alignment rollers - 1 freely movable control panel - Base frame with forklift pockets * For easy transport The data for this ad was created with ModulMWS - the  ...

I - beam section - flat steel: 120 x 20 (d 750) mm I-beam section - upend: 60 x 10 (d800) mm L-beam: 50 x 5 (d 1200) mm bar material - diameter: 35.0 (d 800) mm bar material dia. max.: 70 x 3.0 (1200) mm : 50.0 mm diameter of upper rolls: 155 mm diameter of lower rolls: 155 mm Stroke length: 150 mm Rotating speeds: 9.0 U/min total power requirement: 1.3 kW weight: 305 kg range L-W-H: 900 x 700 x 1500 mm Features: - Robust electric-motor-driven ring/profile bending machine - Machine base frame with rear storage shelf - Capable of horizontal and vertical operation - Equipped with a wide variety of roller sets * Split roller segments * Pipe rollers - Manual feed of the upper roller - Analog position indicator for the upper rollers (scale) - Manually adjustable side/aligning rollers - Base frame with forklift pockets * For easy transport The data for this ad was created with ModulMWS - the ...

cutting diameter: 390 mm saw band length: 3600 mm cutting width: 400 mm cutting speed: 15-1000 m/min surface area: 760 x 600 mm total power requirement: 4 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: 1080 x 880 x 1810 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-band: 3770 x 27 x 0,9 mm Working height: 730 mm cutting speed: 15 - 100 m/min capacity 90 degrees: round: 325 mm : 325 mm capacity 60 degrees: round: 325 mm capacity 30 degrees: round: 280 mm : 190 mm capacity 90 degrees: square: 300 x 300 mm : 300 x 300 mm capacity 60 degrees: square: 280 x 280 mm Cutting range at 45 degrees: square: 270 x 270 mm capacity 30 degrees: square: 170 x 170 mm capacity 90 degrees: flat: 420 x 300 mm : 400 x 300 mm capacity 60 degrees: flat: 360 x 250 mm Cutting range at 45 degrees : flat: 300 x 200 mm capacity 30 degrees: flat: 200 x 100 mm weight of the machine ca.: 530 kg dimensions: 1850 x 1100 x 1230 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Höfer Press for sale. Model: HKP 260 + HKP 40 Year: 2005 Dimensions: Dimensions of the HKP260 (for transport): L x W x H 5100 x 2300 x 3000 mm Dimensions of the HKP40 (for transport): L x W x H 3900 x 2300 x 2400 mm Dimensions of each hydraulic unit: L x W x H 1400 x 1400 x 600 mm Loading table dimensions: L x W x H 4900 x 2100 x 1100 mm Outfeed table dimensions: L x W x H 2900 x 2100 x 1100 mm Heating unit dimensions: L x W x H 1400 x 500 x 1300 mm (2x) Main control cabinet dimensions: L x W x H 2000 x 1000 x 400 mm Dimensions of entire system ready for operation: L x W x H 14600 x 2600 x 3000 mm Weight of the HKP260 press (for transport): approx. 13000 kg, all attachments removed Weight of the HKP40 baler (for transport): approx. 6300 kg, all attachments removed Weight of the hydraulics: approx. 350 kg Weight of the switch cabinet: approx. 400 kg Weight of the heaters: ...

Cutting width approx. 700 mm Cutting height approx. 150 mm Saw blade diameter 500 mm Engine power approx. 4.0 kW hydraulic saw blade stroke

cutting width 700 mm cutting height 150 mm saw blade diameter 500 mm motor power about 4.0 kW hydraulic Saw stroke

Bickel HK 3/50; good condition; Working width 500mm; Stand model; with slot and perforating tool; Foot Switch. ; ready to go. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Many thanks for your interest on our new Heating/cooling table for chocolate or sugar-, candy dough, please find follow our offer: Heating table / cooling table / working table for sugar or chocolate mass Dimensions (lxbxw) : 1200 x 800 x 800mm / or (lxbxw) : 800 x 600 x 800mm (after customers request we are able to produce other dimensions) Execution completely in stainless steel: folded plates made of stainless steel Standing on 4 feet, (square tube 50 x 50) optional height adjustable with two wheels and two castors water heated, closed system with electr. Thermostat, heat exchanger, circulation pump, safety valve 0.5 bar) Plate heat exchanger technical changes reserved Wir bieten diese Maschine als Neumaschine zum Verkauf an. I offer this machine as New machine

Film recycling and granulation plant Material: PE, PP, // Cascade extruder, snail/LD x 220+150/ x 26D, drives 232 & 99 kW, water separator, hot tee with underwater cooling, only 8,500 operating hours

High-performance kneader Volume: 2.5 ltr. Material : product-contacted areas of stainless steel;

PLC – controlled high-performance precision cold-circuit sawing machine with very high quality loading magazine – equipped with software for industrial production in accordance with Industry 4.0, designed for the precision cutting of steel and stainless steel rods – high-strength alloys – forged materials and similar materials and similar materials Saw blade dimensions 460 mm x 2 mm to 2.5 mm, maximum cutting range 0° - 150 mm or 130 x 130 mm - saw blades made of TCT material are normally used (TUNGSTEN CARBIDE TIPPED) - this material allows very high cutting speeds and low saw blade thicknesses, which significantly limits the material loss, saw blade speeds 60 to 130 rpm, controlled unloading slide for two different unloading positions, largest bar length in the loading magazine 6,000 mm, maximum material weight in the loading magazine 3,000 kg, largest material feed per fee ...

MAKE:ISHIKAWAJIMA - HARIMA TYPE:HKA MACH.NO.:HKA 7942 DATE:Jan-77 RATED TORQUE:1500 K.G.M. 10850 LBS-FT

MAKE:ISHIKAWAJIMA - HARIMA TYPE:HKS MACH. NO.:HKS 6776 DATE:Dec-75 RATED TORQUE:1500 K.G.M. 10850 LBS-FT

MAKE:ISHIKAWAJIMA - HARIMA TYPE:HKS MACH. NO.:HKS 6776 DATE:Dec-75 RATED TORQUE:1500 K.G.M. 10850 LBS-FT

-Boiler Hebekiper Diosna HKV 224 -with Boku stage -suitable for boilers with metal pipes on the sides -Tilt height approx. 120cm -Height 245cm -Footprint approx. 170x107cm -Year of construction 2015

used lift-tilt device Manufacturer: L&M Type: HKV Year of construction: 2016 Net weight: 800 kg Total weight: 1,600 kg with transport castors

used lift-tilt device Manufacturer: WAGNER UMWELTTECHNIK Type: W HKV Year of construction: 2008 Load capacity:500 kg Drive power: ___ kW

Unused Düchting Centrifugal Pump Type HK200x6 Year of construction 2015 Düchting Pumpen Maschinenfabrik GmbH & Co. KG Q 300 m³/h H 490 m N 1480 1/min P 560 kW Further Düchting pumps in stock Applications: Conveyance of contaminated, chemically neutral or aggressive liquids with up to 10% solids content. Main water drainage in mining Secondary water drainage and mine air cooling in mining Pressure boosting systems in industrial processes Water supply and water treatment plants Condensate conveying Mineral fertilizer industry Oil & Gas Applications LHK125x6 HK150x11 Q150m³/h H730m n1485 1/min P430kw HK250 HPXU100x10 Q90m³/h H250m n1485 1/min P100kw HK150x5 Q163m³/h H325m n1485 1/min P210kw HK150x9 Q220m³/h H435m n1485 1/min P435kw HPXU150-200x5 Q150m³/h H665m n1485 1/min P415kw HK200x6 Q480m³/h H470m n1485 1/min P792kw HK200x4 Q500m³/h H265m n1485 ...

Lifting tipper König HK1100/2400 for Diosna boiler - Lifting tipper king - Type: HK 1100 / 2400 - for Diosna boiler - with boiler drive - with boiler cutter - Year of construction: 2009