KAISER kstu used machines

1 punching machine (14), manufacturer Kaiser, type KSTU 3500-25-6P, year of manufacture 2000, press force 350 t, stroke rate 20-100/min, stroke height 40 - 250 mm, ram adjustment 200 mm, installation height 700 mm, table size approx. 1,000 x 2,700 mm, control system, manufacturer Siemens, type Simatic Multipanel (retrofitted), force measuring unit, manufacturer Brankamp Marposs, type Prokos X1, two-hand operation, material discharge belt, downstream incline conveyor, coil unwinding reel, manufacturer Dreher, type 2380P, year of manufacture 2000, SN 0051, alignment unit, buffer section, belt feed, manufacturer Dreher, separate switch cabinet system, manufacturer Rittal, cooling unit, accessories: workbench, partition lighting, pull-out cabinet, swivel chair Find more here - / Contact us at -

Press capacity: 100 ton Ram stroke: 300 mm Slide adjustment: 125 mm Shut height (stroke down, adjustment up): 600 mm Free frontal opening L-R: 2.020 mm Free lateral opening F-B: 620 mm Table surface area : 2.000 x 1.000 mm Slide area: 2.000 x 900 mm Hole in table: 1.700 x 300 mm Number of strokes: 10 - 50 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 4.400 mm Dimensions L x W x H: 5.166 x 2.500 x 4.400 mm Weight of machine approx.: 38 ton

High-performance mechanical automatic punching machine with coil system for strip material processing in series production. Manufacturer: Kaiser Pressen Model: KSTU 3150-15 R Machine Type: Automatic Punching Machine Year of Make: 1994 Press force: 3150 kN Drive type: mechanical Stroke rate: 20 – 120 1/min Plunger stroke: 20 – 150 mm Plunger adjustment: 150 mm Table surface: 1780 x 1250 mm Plunger area: 1500 x 1000 mm Installation height: 565 mm Tool weight max.: 3000 kg Strip width: 30 – 800 mm Band thickness: 0.5 – 3 mm Max. strap thickness: 4 mm Strip infeed height: 160 – 260 mm Belt speed: 4 – 30 m/min Straightening rollers: 9 pieces Feed accuracy: ± 0.1 mm Coil inner diameter: 508 mm Coil outer diameter: 1000 – 1500 mm Supply voltage: 3 x 400 V Air pressure: 5 bar Location: Radeberg

Press capacity: 125 ton Ram stroke adjustable: 30 - 120 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 450 mm Free frontal opening L-R: 1.290 mm Free lateral opening F-B: 450 mm Table surface area : 1.250 x 800 mm Slide area: 1.250 x 650 mm Hole in table: 1.050 x 260 mm Number of strokes: 30 - 220 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 3.800 mm Dimensions L x W x H: 3.500 x 2.200 x 3.800 mm Weight of machine approx.: 21,5 ton

I sell a set of Kaeser high pressure compressors that are only used to start a blow molding machine from Taiwan that has never been started.

High-quality film from a German quality manufacturer – no imported goods! Ideal for manufacturers, co-packers and bottlers with the highest demands on aroma protection and machine compatibility. ???? Product: Product Type: High Barrier Flat Film with EVOH Aroma Protection Aroma barrier: Extremely strong – also suitable for citrus aromas Color: Transparent Roll width: 260 mm Film thickness: 62 μm Roll core: 76 mm Length per roll: 1,000 m Manufacturer: Kaiser Verpackung GmbH ???? Applications: ✅ Compatible with almost all flow-wrapping machines ✅ For food (e.g. spices, tea, snacks, coffee pods) ✅ For cosmetics & non-food ✅ Suitable for aroma-sensitive products ???? Example: 15,000 running meters result in 100,000 bags of 15 cm each! ???? Availability & graduated prices (1,000 running metres/roll): Prices per 1,000 m (1 roll): 5 rolls – 140 €/roll 10 rolls � ...

Roller feed KAISER ZR 12 Belt width - 120 mm Feed length 100 mm Feed angle - adjustable - 90 - 180 degrees Tech. Condition - good, complete With pneumatics. Spare parts Btto 250 kg

quantity: 2 STK Dr. Kaiser Diamant Abrichtscheibe Modul 1,5 - EW 15° - HBR=1000 - ID-Nr. 69667_1 The “classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.com (free version) The d ...

High-quality film from a German quality manufacturer – no imported goods! Ideal for manufacturers, co-packers and bottlers with the highest demands on aroma protection and machine compatibility. Product: Product Type: High Barrier Flat Film with EVOH Aroma Protection Aroma barrier: Extremely strong – also suitable for citrus aromas Color: Transparent Roll width: 260 mm Film thickness: 62 μm Roll core: 76 mm Length per roll: 1,000 m Manufacturer: Kaiser Verpackung GmbH Applications: ✅ Compatible with almost all flow-wrapping machines ✅ For food (e.g. spices, tea, snacks, coffee pods) ✅ For cosmetics & non-food ✅ Suitable for aroma-sensitive products Example: 15,000 running meters result in 100,000 bags of 15 cm each! Availability & graduated prices (1,000 running metres/roll): Prices per 1,000 m (1 roll): 5 rolls – 140 €/roll 10 rolls – 135 €/roll 30 ro ...

Technical data Pressure: 32 to Stroke: (stepless) from: 80 s/min up to: 400 s/min Execution: 4 supports Table surface: Length: 420 mm Width: 380 mm Tool height: 300 mm With pressing power: upside down Slide adjustment: 50 mm Stroke adjustment: from: 6 mm up to: 50 mm slide bore diameter: 32 mm Slide clamping surface: Length: 420 mm Width: 380 mm Passage between the supports: longitudinal: 420 mm Lateral: 250 mm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 3000 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 2700 mm Various accessories: Automatic feed: number: 1 Execution: collets Draw-in left Electro-pneumatic clutch Upper extractor Stock reels with electric motor

quantity: 1 STK Diamant Abrichtscheibe Modul 2.75 - EW 17.5° - HBR=2500 - ID-Nr. 85551020_1 The “classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.com (free version) The data f ...

Tool holder, milling holder, milling tool -Number: 3x SK50 holders -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for tool changers -Sale: only complete -Weight: 10 kg

trolley -Simple bucket -Flat press -2x shelves for microfiber mops

pressure: 63 t stroke: 10-80 mm no. of strokes: 65-400 Hub/min ram - range of adjustment: 80 mm table surface area: 1030x550 mm ram surface: 920x450 mm hole in the table: 700x200 mm : 420 mm weight of the machine ca.: 10 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 t no. of strokes: 60-300 Hub/min sheet width: 150 mm ram - range of adjustment: 6-50 mm table surface area: 350x400 mm ram surface: 250x250 mm hole in the table: 130x150 mm weight of the machine ca.: 3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Workbench, work table, assembly bench, drawer cabinet, tool cabinet -Width: 2000 mm -Depth: 800 mm -Height: 890 mm -Weight: 145 kg

Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 820 mm Table surface area : 810 x 450 mm Slide area: 720 x 350 mm Hole in table: 600 x 110 mm Number of strokes: 100 - 1.000 s.p.m. Table height over floor: 1.030 mm Required power: 19,5 kW Weight of machine approx.: 6,8 ton

Press capacity: 50 ton Ram stroke: 54 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 303 mm Table surface area : 810 x 550 mm Number of strokes: 65 - 400 s.p.m. Weight of machine approx.: 7,5 ton Main Motor: 11 kW

Pressure total: 315 ton Ram stroke: 160 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 1.050 mm Free frontal opening L-R: 2.740 mm Free lateral opening F-B: 1.500 mm Distance between oil tray: 2.400 mm Table surface area : 2.740 x 1.800 mm Slide area: 2.400 x 1.700 mm Number of strokes: 10 - 60 s.p.m. Required power: 75,5 kW kW Working hours machine: 77.341 h Height over floor approx.: 5.500 mm Dimensions L x W x H: 5.400 x 3.300 x 5.700 mm Weight of machine approx.: 80 ton Control: Siemens S5

Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 290 mm Free frontal opening L-R: 600 mm Free lateral opening F-B: 190 mm Table surface area : 600 x 500 mm Slide area: 600 x 400 mm Hole in table: 500 x 110 mm Number of strokes: 65 - 400 s.p.m. Table height over floor: 1100 mm Required power: 32 kW Height over floor approx.: 2.800 mm Weight of machine approx.: 6,2 ton

Press capacity: 63 ton Ram stroke adjustable: 8 - 60 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 300 mm Table surface area : 810 x 550 mm Slide area: 700 x 420 mm Hole in table: 550 x 140 mm Distance between oil tray: 700 mm Table height over floor: 920 mm Number of strokes: 65 - 400 s.p.m. Weight of machine approx.: 8 ton Dimensions L x W x H: 2935 x 1170 x 3000 mm Main Motor: 11 kW

Manufacturer: Kaiserpresse Model: PA620/2 Type of Machine : Press Find more here - / Contact us at -

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Taper in spindle: BT 50 Diameter: 53 - 70 mm

Kaiser Press 50to -Exhibition machine / zero operating hours -Electro-hydraulic drive -Actuation: foot pedals and push buttons on the control panel -Compressive force max.: 50 tons -Power consumption: 0.75 kW -Voltage: 230 V -Frame width: 930 mm -Maximum frame width incl. hand crank and electrical unit: 1300 mm -Total height: 1900 mm -Cylinder stroke: 145 mm plus 60 mm lead screw -Usable width – working area inside: max. 750 mm -Usable height – working range: 0 mm to 780 mm -Depth of the frame: 220 mm -Total depth with foot: 535 mm (attachment to the ground possible) -Support depth of the height-adjustable work table (cross beam): 245 mm -Cross beam adjustable in 6 positions (hole spacing: 140 mm) -Height adjustment of the cross beam via hand crank (no manual lifting necessary) -Hydraulic unit can be moved laterally: 300 mm (ball bearing in the upper guide area)  ...

Scissor lift table trolley, scissor lift table, scissor lift table, scissor lift, scissor lift, single scissor lift table -Load capacity: 500 kg -Platform: 1260 x 915 mm -Dimension retracted: 500 mm -Dimension extended: 1115 mm -Max. Stroke: 615mm -Quantity: 1 piece available -Transport dimensions: 1420/915/H870 mm -Town weight: 274 kg