used KAESER fs

Compressed air screw compressor Kaeser FSD 571 315 kW, 12 bar, 46.40 m3/min

Rotary screw air compressor Kaeser FSD 571 315 kW, 12 bar, 46,40 m3/min

Kaeser used machine power: 200 KW volume flow: 36,52 m3/min pressure: 7,5KW 1997 year

Kaeser user machine power200KW volume flow:36,52m3/min. pressure:7,5 bar

PROD. KAESER TYP FSD 571 S/N 1076 ROK 2008 MOC (kW) 315 WYDAJ. (m3/min) CIS (bar) 8 GODZ (DOC/OGÓL) ok 37000 FALOWNIK nie WBUD. OSUSZACZ nie WYMIENNIK nie CHŁODZONA (POW/WODA) NA ZBIORNIKU nie DOKUMENTY nie PRZYŁĄCZE 2 NOWA/UŻYWANA UŻYWANA

PROD. KAESER TYP FSD 571 S/N 1043 ROK 2007 MOC (kW) 315 WYDAJ. (m3/min) CIS (bar) 8 GODZ (DOC/OGÓL) ok 34000 FALOWNIK nie WBUD. OSUSZACZ nie WYMIENNIK nie CHŁODZONA (POW/WODA) NA ZBIORNIKU nie DOKUMENTY nie PRZYŁĄCZE 2 NOWA/UŻYWANA UŻYWANA

200.0 kW, max. 7.50 bar, 35.71 m3 rpm, built 1991, New screw in 1997 at 53000 operating hours. Engine: 380V/50Hz, 460V/60Hz

200,0 kW, max. 7,50 bar, 35,71 m3/min, Year 1991,new air end in 1997 with 53000 hours. Motor: 380V/50Hz, 460V/60Hz

315 kW, max. 12.0 bar, 46.40 m3/min. condition as new.

315 kW, max. 12,0 bar, 46,40 m3/min. Condition like new.

We offer Kaeser compressed air system consisting Schraubenkompressor.SC 1211, dryer DC 75E, compressed air tank 3000 l, piping with ultrafilter SG 0192, Sigma compressed air management system, Kaeser oil-water separation system and control cabinet The compressed air system is used to supply compressed air to a production hall. It was built or extended from 1995 - 2016 and is fully functional, in good condition and is offered for sale by our customer due to the restructuring of the hall use. The system must be serviced and inspected before it can be put back into operation. The system consists of the following components: 1. Screw compressor Kaeser CS 121 75 kW-12 bar built in 1995 & separate air intake duct from outside and inside with flap control 2, Adsorption dryer 1 Kaeser DC 75 E YOC 2016 6-16 bar 3. Compressed air tank flamco STAG 3000 l 16 bar Year 1995 704 kg 4 ...

We offer Adsorption dryer 1 Kaeser DC 75 E YOC 2016 6-16 bar Bid 1-5 The system is part of a compressed air system in a production hall. It's needed. Built in 2016, and fully functional in very good condition and is offered - due to the restructuring of the hall use at our customer. The compressed air tank is not part of the offer. However, it can also be sold individually or purchased with the system. specifications: - Manufacturer: Kaeser Coburg - Model: Adsorption dryer DC 75e with 2 desiccant tanks Year:2015 - Volume: 133 l - Filling weight: 100 kg - Adsorption Center: Activated Aluminum Oxide Al2O2 - P0 & PS 0/16 bar - TO -10/+66 °C - TS +70°C - PT 26.1 bar - Year of construction: 2016 - Machine No.: 9,5486,20010-1037 - Operating hours: - will be added - Max operating temperature air: 0° C - Ambient temperature 2 - 45°C - DL Inlet temperature min/ ...

Kaeser Compressor package: - Kaeser CS75, 1992 year - 1 pcs. - Kaeser AS35, 1983-1992 year - 6 pcs. - Kaeser SK18, 1981-1982 year - 2 pcs. - Kaeser BS50, 1993 year - 1 pcs. - Kaeser SK25, 1987 year - 1 pcs. all operating in good condition.

Key data: 75 , 12 , 12

We offer Screw compressor Kaeser CS 121 75 kW-12 bar built in 1995 & separate air intake duct from outside and inside with flap control Picture 1-11 The system is part of a compressed air system in a production hall. It is used, built in 1995, and fully functional, in good condition and is offered by our customer due to the restructuring of the use of the hall. The display will be updated even further specifications: - Manufacturer: Kaeser Coburg - Model: Screw compressor Kaeser CS 121 with air intake duct from the outside and inside with flap control - LANDIS & GYR SQR 65.1 actuator for air flaps - Year of construction: verm 1995 - Machine No.: 1210382 - Operating hours: - electric 37756 / Compr. 20546 - Permissible operating pressure: 12 bar - Operating temperature: 75-85°C Engine - Nominal power: 75 kW - Engine speed: 1500 1/min - Degree of protection: IP ...

We are very pleased to offer one full 40` container (FCL) containing the following compressors: Make Model Atlas Copco 1xGA 110 Atlas Copco 1xGA 75 Kaeser 1xCS 75 Kaeser 1xAS 30 Kaeser 1xBS 50 Kaeser 1xBS 60 Atlas Copco 1xGA 30 Atlas Copco 1xGA 15 Atlas Copco 3xGA 22 Kaeser 5xAS 35 For more details please contact us.

Description: serial number: 4987 max.working pressure: 8 bars rated power: 3 kW air flow: 400 l/m working hours: approx. 2952 hrs. in total working hours under load: approx. 2143 hrs. time left to regular maintenance: approx. 3000 hrs. Kaeser Equipment RFID card  , please also have a look at the video of this compressor Energy-saving performance The efficiency of a machine depends on the total costs incurred throughout the equipment’s entire service life. With compressors, energy costs account for the lion’s share of total expenditure. KAESER therefore designed its SX series compressors with optimum energy efficiency in mind. Refinements to the energy-saving SIGMA PROFILE airend rotors and the use of premium efficiency IE3 motors have significantly contributed to the increased perfor mance of these versatile compressors. The addition of the SIGMA CONTROL 2 internal  ...

We offer Adsorption dryer 2 Kaeser DC 75 E YOC 2016 6-16 bar Bid 1-3 The system is part of a compressed air system in a production hall. It is used, built in 2016, and fully functional, in very good condition and is offered - due to restructuring of the hall use at our customer. The display will be updated even further specifications: - Manufacturer: Kaeser Coburg - Model: Adsorption dryer DC 75 with 2 desiccant tanks Year:2015 - Volume: 133 l - Filling weight: 100 kg - P0 & PS 0/16 bar - TO -10/+66 °C - TS +70°C - PT 26.1 bar - Year of construction: 2016 - Machine No.: 9,5486,20010-1038 - Operating hours: - will be added - Max operating temperature air: 0° C - Ambient temperature 2-45°C - DL Inlet temperature min/max +2 / +50 °C - Pressure dew point -40°C - Connection: 240V 1N /PE50 Hz 0.2A - TüV.: still available - Dimensions: 2000 x 1200 x 800 ...

KAESER SK 26 compressor system • KAESER SK 26 screw compressor • Effective flow rate 2.27 m³/min. • Pressure 8.5 bar • Motor power / speed 15 kW / 3000 rpm. • KAESER – CONTROL – Command • Compressed air boiler 2,000 liter boiler capacity with automatic steam trap • Compressed air – TB 45 refrigerant dryer, volume flow 4.5 m³/min., automatic steam trap, nominal power 1.05 kW, voltage 230 V / 50 HZ, bypass and hose line to the boiler • Oil-water separator AQUWAMAT 4 Machine technically and optically in very good condition

Description: KAESER ASK 34 SFC with Inverter Drive and Heat Recovery Option  , rated power: 18.5 kW air flow: 3600 l/m working hours: approx. 15948 hrs., 12845 hrs. under load max. working pressure: ,8 bar regulary maintained equipped with 1 RFID user card! service manual: unavailable  , integrated SFC control cabinet housed in its own integrated yet insulated control cabinet the SFC frequency converter is shielded from heat arising from the compressor a separate fan keeps operating tem peratures in the optimum range, so as to ensure maximum performance and service life SIGMA CONTROL 2 “traffic light” LED indicators show operating status at a glance, plain text display, 30 selectable languages, soft-touch keys with icons, fully automatic monitoring and control selection of Dual, Quadro, Vario and Continuous control as standard ethernet interface for con ...

Or against price bid Kaeser SK26 screw compressor Manufacturer Kaeser Type SK26 Built in 2004 10bar Approximately 15,000 load hours Top Condition Special price

Kaeser pressure tank 1000 L 16 bar Year of build 1980, accompanying Kaeser rotary compressor 1050-2 - G see my other ads Fully functional, with pressure switch. Including valid test book â?¬590 Site 76829 Landau Shipping via forwarding only possible and pick-up preferred, forklifts to load up there.

For sale KAESER Compressor Brand:KAESER Type : ES 300 Max : 8 bar RBM: 1500 V: 400 kW: 160,0 Weight: Measure: Year built:1999

DRYER KAESER TI901 nr 1004 PROD. KAESER TYP TI901 S/N 1004 YEAR 2005 POWER (kW) 11.5 EFFICIENCY . (m3/min) 90 PRESSURE (bar) 16

Buy unused, original, three sets of cylinders for the compressor, booster KAESER. I bought the cylinders in 2020 as belt cylinders for my KAESER N 753 booster, but in the meantime I sold the booster and the cylinders remained unused in stock. If you need more information, write, I will be happy to answer. The price applies to three sets originally packed (cylinder, piston, gaskets and nuts). Do you have any questions? I will be happy to respond on WhatsApp +48 502 700 330

These compressor elements from the compressed air brands like Atlas Copco, Kaeser, CompAir and Boge are refurbished here in our in-house workshop by our well-trained technicians. All refurbished air ends are sold with a comprehensive guarantee. Furthermore, aircoolers and oilcoolers for oil-injected screw compressors and aftercoolers and intercoolers and oilcoolers for oil-free air compressors for all well-known brands like Atlas Copco, Kaeser, CompAir, Boge and Ingersoll Rand.