We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Kaeser Compressor package: - Kaeser CS75, 1992 year - 1 pcs. - Kaeser AS35, 1983-1992 year - 6 pcs. - Kaeser SK18, 1981-1982 year - 2 pcs. - Kaeser BS50, 1993 year - 1 pcs. - Kaeser SK25, 1987 year - 1 pcs. all operating in good condition.
used
These compressor elements from the compressed air brands like Atlas Copco, Kaeser, CompAir and Boge are refurbished here in our in-house workshop by our well-trained technicians. All refurbished air ends are sold with a comprehensive guarantee. Furthermore, aircoolers and oilcoolers for oil-injected screw compressors and aftercoolers and intercoolers and oilcoolers for oil-free air compressors for all well-known brands like Atlas Copco, Kaeser, CompAir, Boge and Ingersoll Rand.
used
Compressor is fully functional with run: 44621h and load: 22249h. Approximately 20 years old, but always serviced by a Kaeser service center.
used
Kaeser used machine power: 45 KW volume flow: 8,26 m3/min. pressure: 8 bar
used
Kaeser used machine power : 45 KW volume flow: 8,26m3/min pressure:8,5 bar
used
Kaeser used machine power:75KW pressure:8bar
used
Kaeser CSDX 165 SFC T used machine power: 90 kW volume flow: 3,84 - 15,84 m3/min pressure: 8,5 bar 2012 year
used
PROD. KAESER TYP CSDX 137 S/N 1388 ROK 2006 MOC (kW) 75 WYDAJ. (m3/min) 9.8 CIS (bar) 15
used
PROD. KAESER TYP CSDX162 T S/N 1242 ROK 2005 MOC (kW) 90 WYDAJ. (m3/min) 16.6 CIS (bar) 8 GODZ (DOC/OGÓL) 28900 FALOWNIK nie WBUD. OSUSZACZ tak
used
PROD. KAESER TYP CSDX 137 S/N 1081 ROK 2006 MOC (kW) 75 WYDAJ. (m3/min) 13.7 CIS (bar) 8
used
PROD. KAESER TYP CSD122 SFC S/N 5189 ROK 2011 MOC (kW) 75 WYDAJ. (m3/min) 2,20 -10,50 CIS (bar) 8,5
used
PROD. KAESER TYP CSD122 SFC S/N 5189 ROK 2011 MOC (kW) 75 WYDAJ. (m3/min) 2,20 -10,50 CIS (bar) 8,5
used
PROD. KAESER TYPE CSD85 SFC S/N 1076 YEAR 2014 POWER (kW) 45 EFFICIENCY (m3/min) 1.99-8.37 CIS (bar) 8.5 HOURS (DOC/OC) FEEDER yes BUILT. DRYER no EXCHANGER yes
used
PROD. KAESER TYP CSD125 T SFC S/N 1007 ROK 2012 MOC (kW) 75 WYDAJ. (m3/min) 2,22-10,74 CIS (bar) 12,0 GODZ (DOC/OGÓL) FALOWNIK tak WBUD. OSUSZACZ tak ABT125
used
used
90 kW, max. 8 bar, 16,10 m3/min. Total hours: 13719 Loaded hours: 7703 Condition as new.
used
75.0 kW, max. 8.50 bar, 12.28 m3/min. With built-in frequency inverter. Volume flow 2.89 - 12.28 m3 rpm.
used
75,0 kW, max. 8,50 bar, 12,28 m3/min. With built-in frequency inverter. Volume flow 2,89 - 12,28 m3/min.
used
Variable speed drive. Volume flow 2.9 - 12.22 m3/min. at 7.0 bar. With energy recovery.
used
nowa - new Moc; 75 kW Max cisnienie: 8,5 Bar rok produkcji - 2018
used
We offer Kaeser compressed air system consisting Schraubenkompressor.SC 1211, dryer DC 75E, compressed air tank 3000 l, piping with ultrafilter SG 0192, Sigma compressed air management system, Kaeser oil-water separation system and control cabinet The compressed air system is used to supply compressed air to a production hall. It was built or extended from 1995 - 2016 and is fully functional, in good condition and is offered for sale by our customer due to the restructuring of the hall use. The system must be serviced and inspected before it can be put back into operation. The system consists of the following components: 1. Screw compressor Kaeser CS 121 75 kW-12 bar built in 1995 & separate air intake duct from outside and inside with flap control 2, Adsorption dryer 1 Kaeser DC 75 E YOC 2016 6-16 bar 3. Compressed air tank flamco STAG 3000 l 16 bar Year 1995 704 kg 4 ...
used
We offer Adsorption dryer 1 Kaeser DC 75 E YOC 2016 6-16 bar Bid 1-5 The system is part of a compressed air system in a production hall. It's needed. Built in 2016, and fully functional in very good condition and is offered - due to the restructuring of the hall use at our customer. The compressed air tank is not part of the offer. However, it can also be sold individually or purchased with the system. specifications: - Manufacturer: Kaeser Coburg - Model: Adsorption dryer DC 75e with 2 desiccant tanks Year:2015 - Volume: 133 l - Filling weight: 100 kg - Adsorption Center: Activated Aluminum Oxide Al2O2 - P0 & PS 0/16 bar - TO -10/+66 °C - TS +70°C - PT 26.1 bar - Year of construction: 2016 - Machine No.: 9,5486,20010-1037 - Operating hours: - will be added - Max operating temperature air: 0° C - Ambient temperature 2 - 45°C - DL Inlet temperature min/ ...
used
Key data: 75 , 12 , 12
We offer Screw compressor Kaeser CS 121 75 kW-12 bar built in 1995 & separate air intake duct from outside and inside with flap control Picture 1-11 The system is part of a compressed air system in a production hall. It is used, built in 1995, and fully functional, in good condition and is offered by our customer due to the restructuring of the use of the hall. The display will be updated even further specifications: - Manufacturer: Kaeser Coburg - Model: Screw compressor Kaeser CS 121 with air intake duct from the outside and inside with flap control - LANDIS & GYR SQR 65.1 actuator for air flaps - Year of construction: verm 1995 - Machine No.: 1210382 - Operating hours: - electric 37756 / Compr. 20546 - Permissible operating pressure: 12 bar - Operating temperature: 75-85°C Engine - Nominal power: 75 kW - Engine speed: 1500 1/min - Degree of protection: IP ...
used
We are very pleased to offer one full 40` container (FCL) containing the following compressors: Make Model Atlas Copco 1xGA 110 Atlas Copco 1xGA 75 Kaeser 1xCS 75 Kaeser 1xAS 30 Kaeser 1xBS 50 Kaeser 1xBS 60 Atlas Copco 1xGA 30 Atlas Copco 1xGA 15 Atlas Copco 3xGA 22 Kaeser 5xAS 35 For more details please contact us.
used
Description: serial number: 4987 max.working pressure: 8 bars rated power: 3 kW air flow: 400 l/m working hours: approx. 2952 hrs. in total working hours under load: approx. 2143 hrs. time left to regular maintenance: approx. 3000 hrs. Kaeser Equipment RFID card  , please also have a look at the video of this compressor Energy-saving performance The efficiency of a machine depends on the total costs incurred throughout the equipment’s entire service life. With compressors, energy costs account for the lion’s share of total expenditure. KAESER therefore designed its SX series compressors with optimum energy efficiency in mind. Refinements to the energy-saving SIGMA PROFILE airend rotors and the use of premium efficiency IE3 motors have significantly contributed to the increased perfor mance of these versatile compressors. The addition of the SIGMA CONTROL 2 internal ...