7 KAESER compressors used machines

Kaeser compressed air tank 3000 liters approx. 3 meters high

Type: EPC510-250 Tank: 250 liter 10 bar 510 liter/min 3 kW 220/380 volt

serial number: 2313 control: SAM 8/4 rated current: 0,7 - 0,35 A frequency: 60 Hz : 100-240 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Emulsion splitting plant, oil-water separation system -The cost-effective and permanently reliable solution to the problem is usually the oil/water separation for dispersed condensates. The purified water meets the legal requirements for sewer discharge. -Dimensions: 590/590/H1170 mm -Weight: 58 kg

oil-water separation system, condensate separator, oil and water separator, oil separator, separator, oil/water separator, oil/water separator -Manufacturer: Kaeser, oil-water separator -Type: Aquamat 4 -Dimensions: 530/480/H1000 mm -Weight: 22 kg

There are 3x Kaeser compressors, 2x Atlas Copco compressors and 3x Kaeser refrigeration dryers available. 1) Compressor Kaeser CS 75, year of manufacture: 1992, operating pressure: 10bar, operating hours: 38265h. 2) Compressor Kaeser AS 44, year of manufacture: 1999, operating pressure: 8.5bar, operating hours: 41564h. 3) Compressor Kaeser BS 60, year of manufacture: 1983, operating pressure: 7.5bar, operating hours: 50674h. 4) Compressor Atlas Copco GA 45, year of manufacture: 1990, operating pressure: 10bar, operating hours: 26831h. 5) Compressor Atlas Copco GA 45, year of manufacture: 1990, operating pressure: 10bar, operating hours: 52447h. 6) Refrigeration dryer Kaeser TD 51, year of manufacture: 1997, refrigerant: R22. 7) Refrigeration dryer Kaeser TF 171, year of manufacture: 2000, refrigerant: R134a. 8) Refrigeration dryer Kaeser TE 76, year of manufacture: 1996, refrigerant: R22 ...

Two compressors Kaeser are available. 1) Kaeser CSD 102 T SFC, year of manufacture: 2002, rated power: 55kW, max. operating pressure: 8.5bar, refrigerant: R134a, refrigerant quantity: 3.1kg, operating hours: approx. 132150h, load hours: approx. 129858h. 2) Kaeser BS 61, year of manufacture: 2001, rated power: 31kW, max. operating pressure: 8bar, operating hours: 91889h, load hours: 78711h. Documentation available. An on-site inspection is possible.

40 bar booster KAESER 300 / 400 m3/h

Compressor KAESER 10 bar power 90 KW

Compressor KAESER Year of construction: 1992 Output: 37 kW Vol. -power: 5.25 m ^ 3/min Operating pressure: 10 bar

Compressor KAESER Year of construction: 1992 Output: 37 kW Vol. -power: 5.25 m ^ 3/min Operating pressure: 10 bar

Compressor KAESER Year of construction: 1992 Output: 37 kW Vol. -power: 5.25 m ^ 3/min Operating pressure: 10 bar

Compressor KAESER Year of construction: 1992 Output: 37 kW Vol. -power: 5.25 m ^ 3/min Operating pressure: 10 bar

Compressor KAESER Year of construction: 1992 Output: 37 kW Vol. -power: 5.25 m ^ 3/min Operating pressure: 10 bar

Compressor KAESER Year of construction: 1992 Output: 37 kW Vol. -power: 5.25 m ^ 3/min Operating pressure: 10 bar

Compressor KAESER Year of construction: 1992 Output: 37 kW Vol. -power: 5.25 m ^ 3/min Operating pressure: 10 bar

We sell the Kaeser SK 25 screw compressor, as a set including compressed air tank and refrigerant dryer The condition of the compressor can be seen in the attached pictures. The unit has been well maintained and is fully functional. Operating hours: 12,324h run and 2,317h load Last inspection 09/22. Until next inspection 1,029h load Technical details: -Operational -Fully automatic - Very soundproofed - Vibration damped - All panels powder-coated - For ambient temperatures up to +45 °C - Easy access to all service points thanks to removable left cover SIGMA CONTROL 2 Specifications: - Working pressure: 7.5 bar - Flow rate: 2.50m³/min - Maximum operating pressure: 8 bar -Rated power: 15.0 kW -Engine speed: 2960 rpm -Ambient temperature: 3 °C to 45 °C

ACT activated carbon adsorbers should always be equipped with Kaeser filters. Installed as pre-filters and post-filters, they ensure the maximum service life of the activated carbon and keep carbon dust out of the cleaned compressed air – with very little pressure loss. Generous filling quantities of high-quality activated carbon and their permanently low pressure loss make them particularly economical. This means that they can withstand up to 12,000 compressor operating hours without changing activated carbon. A standard oil indicator indicates possible malfunctions. Residual oil contents in the concentration range 0 – 0.01 mg/m³ Volume flow 1.60 – 155.50 m³/min Maximum operating pressure 10 bar / 16 bar and as an option also 45 bar

Air consumption: 97,2 m³/h Motor output: 9 kW Overall size: 630 x 1220 x 1720 mm Receiver: 270 L The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Air consumption: 97,2 m³/h Motor output: 9 kW Overall size: 630 x 1220 x 1720 mm Receiver: 270 L The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Air consumption: 97,2 m³/h Motor output: 9 kW Overall size: 630 x 1220 x 1720 mm Receiver: 270 L The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Temperature test Chamber Manufacturer: Noske Kaeser Type: Tea 68 / 40 X Year of construction: 1997 Refrigerant: R404A Refrigerant type: HFC mixture Cooling range: - 40° to 160° C. chemical formula: R32/143a/134a(44%52%/4%) Capacity: 3 kg GWP value: 3922 CO2 equivalent 17.6 tons - co2 equivalent Mains voltage: 400 V Nominal listing of the compressor: 5 kW Outer dimensions: H = 1670 x 910 x = B T = 1535mm Weight: 430 kg All information without guarantee

Temperature test Chamber Manufacturer: Noske Kaeser Type: Tea 68 / 40 X Year of construction: 1997 Refrigerant: R404A Refrigerant type: HFC mixture Cooling range: - 40° to 160° C. chemical formula: R32/143a/134a(44%52%/4%) Capacity: 3 kg GWP value: 3922 CO2 equivalent 17.6 tons - co2 equivalent Mains voltage: 400 V Nominal listing of the compressor: 5 kW Outer dimensions: H = 1670 x 910 x = B T = 1535mm Weight: 430 kg All information without guarantee

Emulsion splitting plant, oil-water separation system The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations for sewer discharge

Emulsion splitting plant, oil-water separation system The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations for sewer discharge