Price: -
New in: -
Manufacturer:
Model:
Type of machine:
item-No.::
Seller-item-No.:
Auctions:
used or new:
Radius search:
Category: 1200 machines and plants for process engineering
16.04.2026
approved
dealer
item-No.: 167985371
New in: 2007

used

Location: Land-de

Rated power: 75kW, max. operating overpressure: 8.5bar, speed: 3000rpm, operating hours: 75122h, load hours: 72719h. The machine requires bearing replacement. Documentation available. An on-site inspection is possible.

Category: 0
16.04.2026
approved
dealer
item-No.: 167536849
New in: 1990

used

Price: 3.600 €

Screw compressor KAESER type BS 50Fabr. No. 402852 built in 1990Volume flow 5 m³/min. Pressure capacity 7.5 barEngine power main motor 30 kWNet connection 400 volts, 50 HzConnection thread 1 1/2 inches- 1107.90Operating hours read- 749.00 load hours read- SoundproofSpace requirement L x W x H 1600 x 1070 x 1350 mmWeight 900 kgvery good conditionWas a reserve compressor and has only a few operating hours; used

Category: 0
16.04.2026
approved
dealer
item-No.: 167536861
New in: 1992

used

Price: 1.800 €

Reciprocating compressor KAESER type EPC 630-250Fabr. No. 1802334 year of construction 1992Volume flow at 6 bar 440 litres/min. Capacity max. 630 litres/min. Pressure capacity 10 barBoiler capacity 250 litersEngine power 3 kWNerg connection 400 Volt, 50 Hz (with 16 Amp. Plug)- 2 cylinders oil-lubricated- Pressure switch set to 10 bar- Runtime from 0 bar to 10 bar Shut-off pressure = 5 minSpace required L x W x H 750 x 700 x 1750 mmWeight approx. 150 kgGood condition; used

Category: 1300 other machines and plants
16.04.2026
approved
dealer
item-No.: 167522940

used

Location: Land-de
Price: 590 €

Refrigeration dryer KAESER TAH 6 -used----------- Technical data ----------Maximum pressure: 16 bar, Power supply: 230 Volt

Category: 1200 machines and plants for process engineering
16.04.2026
approved
dealer
item-No.: 167395558
New in: 1998

used

Location: Land-de

A Kaeser compressor, a Kaeser refrigeration dryer and an ABB DC motor are available. 1) Oil-lubricated screw compressor Kaeser SM 11, year of manufacture: 1998, serviced: 2023, operating pressure: 10bar, volume flow: approx. 1100l/min, power: 7.5kW, machine dimensions X/Y/Z: approx. 600mm/650mm/850mm, weight: approx. 200kg. 2) Refrigeration dryer Kaeser TA 5, year of manufacture: 2012, serviced: 2023, refrigerant: R134a, operating pressure: 16bar. The condensate drain is defective. 3) DC motor ABB DMP 180-4LB, year of manufacture: 1998, power: 114.7kW, speed: 1800rpm, operating mode: continuous operation, insulation class: H-Rise F, weight: approx. 450kg. On-site inspection is possible.

Category: 109 other metal working machines
16.04.2026
approved
dealer
item-No.: 167383670
New in: 2014

used

Location: Land-de

serial number: 2313 control: SAM 8/4 rated current: 0,7 - 0,35 A frequency: 60 Hz : 100-240 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 308 other machines for plastic
16.04.2026
approved
dealer
item-No.: 167253067
New in: 2007

used

Location: Land-de

Air volume flow: 2.55m³/min, pressure dew point: 3°C, operating pressure: 16bar, refrigerant: R134a, refrigerant capacity: 670g. Documentation available. On-site inspection is possible.

Category: 2305 other automation equipment
16.04.2026
approved
dealer
item-No.: 167236325

used

Price: 420 €

Category: 109 other metal working machines
16.04.2026
approved
dealer
item-No.: 167193118

used

Location: Land-be

Type: EPC510-250 Tank: 250 liter 10 bar 510 liter/min 3 kW 220/380 volt

Category: 109 other metal working machines / Compressors
16.04.2026
approved
dealer
item-No.: 167190598
New in: 2001

used

Location: Land-de
Price: 8.900 €

power requirement: 37 + 55 kW Pressure power: 8 bar EXW 92536 Pfreimd - loaded free on truck The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 1300 other machines and plants
16.04.2026
approved
dealer
item-No.: 167161660

used

Price: 3.200 €

Category: 212 peripheral equipment (e.g. heating, conveying, drying) / Compressors
16.04.2026
approved
dealer
item-No.: 166888176

used

Location: Land-de

Air consumption: 48 m³/h Motor output: 5,5 kW Overall size: 620 x 980 x 1480 mm Receiver: 215 L The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 212 peripheral equipment (e.g. heating, conveying, drying) / Compressors
16.04.2026
approved
dealer
item-No.: 166888177

used

Location: Land-de

Air consumption: 97,2 m³/h Motor output: 9 kW Overall size: 630 x 1220 x 1720 mm Receiver: 270 L The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 212 peripheral equipment (e.g. heating, conveying, drying)
15.04.2026
approved
dealer
item-No.: 166881355
New in: 1993

used

Location: Land-de

Manufacturer: Kaeser, Type: AS 35, Year: 1993, Schraubenkompressor: yes, Operating hours: 44000, Volume flow m³/min: ca.3,0, Antriebsleistung kW 1: 22, Volume flow rate m³/h: 3,3, Year :1993

Category: 213 spare parts for wood working machines
15.04.2026
approved
dealer
item-No.: 166880863
New in: 2006

used

Location: Land-de

Manufacturer: Kaeser Vakuumstation, Type: BSV 100, Year: 2006, Saugvermögen m³/h: 1,0 bar, revolutions rpm: 3000, Operating hours: 76281, Revolutions of main rotor U/min: 3000, Year :2006

Category: 109 other metal working machines
16.04.2026
approved
dealer
item-No.: 166037365

used

Price: 190 €

Safety Valve, Angle Safety Valves, Pressure Relief Valve KAESER, KUNKLE VALVE Type 337 - H P: 970 mbar Connections: 2 New ! Dimensions: 185 x 117 x 132 mm

Category: 109 other metal working machines
16.04.2026
approved
dealer
item-No.: 166037366

used

Price: 160 €

Safety Valve, Angle Safety Valves, Pressure Relief Valve KAESER, KUNKLE VALVE Type 337 - H P: 1000 mbar Connections: 2 New ! Dimensions: 185 x 117 x 132 mm

Category: 1300 other machines and plants
16.04.2026
approved
dealer
item-No.: 166037367

used

Price: 250 €

Safety Valve, Angle Safety Valves, Pressure Relief Valve KAESER, KUNKLE VALVE Type 337 - J P: 520 mbar Connections: 2 1/2 New ! Dimensions: 210 x 151 x 164 mm

Category: 109 other metal working machines
16.04.2026
approved
dealer
item-No.: 166037368

used

Price: 250 €

Safety Valve, Angle Safety Valves, Pressure Relief Valve KAESER, KUNKLE VALVE Type 337 - J P: 610 mbar Connections: 2 1/2 New ! Dimensions: 210 x 151 x 164 mm

Category: 109 other metal working machines
16.04.2026
approved
dealer
item-No.: 166037369

used

Price: 390 €

Safety Valve, Angle Safety Valves, Pressure Relief Valve KAESER, KUNKLE VALVE Type 337 - J P: 650 mbar Connections: 2 1/2 New ! Dimensions: 210 x 151 x 164 mm

Category: 109 other metal working machines
16.04.2026
approved
dealer
item-No.: 166037370

used

Price: 280 €

Safety Valve, Angle Safety Valves, Pressure Relief Valve KUNKLE VALVE, KAESER Type 337 - J01ANE P: 920 mbar Connections: 2 1/2 New ! Dimensions: 210 x 151 x 164 mm

Category: 109 other metal working machines
16.04.2026
approved
dealer
item-No.: 166037371

used

Price: 280 €

Safety Valve, Angle Safety Valves, Pressure Relief Valve KUNKLE VALVE, KAESER Type 337 - J01ANE P: 1020 mbar Connections: 2 1/2 New ! Dimensions: 210 x 151 x 164 mm

Category: 1300 other machines and plants
16.04.2026
approved
dealer
item-No.: 166037117

used

Price: 90 €

Closing element for check valve, Closing Element KAESER 892268.0 DN300 New ! Dimensions: 490 x 170 x 35 mm

Category: 1300 other machines and plants
16.04.2026
approved
dealer
item-No.: 166033535

used

Price: 250 €

Compressor spare part KAESER AFVM 18 ( AFVM18 ) 893358.00010 450 bar Dimensions: 200 x 250 x 170 mm

Category: 1300 other machines and plants
16.04.2026
approved
dealer
item-No.: 166033536

used

Price: 1.250 €

Refrigeration dryer, compressed air dryer with oil-water separator KAESER TB 19 ( TB19 ) Operating pressure: max 15 bar Working pressure HD: max 25 bar Rated voltage: 230 V 1AC 50 Hz Rated current: 3,3,00 65 A ambient temperature: 5 - 43 °C oil - water separator: AQUAMAT 1 Mat.Nr.: 5.2648.00010 without refrigerant ! used, tested ! Dimensions ( refrigerant dryer ): 620 x 540 x 1340 mm Dimensions ( oil-water separator ): 360 x 230 x 530 mm

Category: 819 presses: accessories and spare parts
16.04.2026
approved
dealer
item-No.: 162240942
New in: 2011

used

Location: Land-de

Category: 819 presses: accessories and spare parts
16.04.2026
approved
dealer
item-No.: 162240943
New in: 2013

used

Location: Land-de

Category: 819 presses: accessories and spare parts
16.04.2026
approved
dealer
item-No.: 162240944
New in: 2018

used

Location: Land-de

Category: 819 presses: accessories and spare parts
16.04.2026
approved
dealer
item-No.: 162240945
New in: 2013

used

Location: Land-de

Category: 819 presses: accessories and spare parts
16.04.2026
approved
dealer
item-No.: 162240946
New in: 2018

used

Location: Land-de

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
RESALE since 1996