used JÄCKLE plasma

TIG welding machine make JÄCKLE type TIG 301 i DCMash. -No: 50330909Max. Power consumption: 15 kVASetting range stepless TIG: 4 - 300 V.: Electrode: 10 - 240 ADuty cycle 50 (40)% TIG: 300 A / 22 V: Electrode: 240 A / 29.6 VDuty cycle 100 (80)% TIG: 220 A / 18.8 V: Electrode: 180 A / 27.2 VMains voltage 50/60 Hz: 400 VFuse: 20 A slowWeight approx: 65 kgDimensions: 1050 x 500 x 810 mmWith- water cooled- mobileused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Machine Type: TIG Inverter Welding Machine gas-cooled DC system Make Jäckle Type TIG 201 i DC Connection voltage 1 x 230 Volt Adjustment range 3 – 200 amps Duty cycle 35% ED at 200 amps 60% ED at 180 amps 100% ED at 150 amps Infinitely variable current adjustment max. weldable material thickness steel / stainless steel = 6 mm Cooling inverter by built-in fan Cooling burner gas-cooled Design of portable assembly system Fuse protection 16 amps Dimensions L x W x H 600 x 255 x 440 mm Weight 24 kg Age approx. 10 years Condition workshop-tested, very good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG torch WHL 17, 4 mtr. long 1 piece of ground cable 1 piece pressure reducer 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 1 piece of instruction manual Warranty ...

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Jäckle, water-cooled TIG welding machine -Type: TIG 301i DC -Welding power: max. 300 A, see nameplate -Cooling device: KG 2 -Accessories: including ground cable, hose package -Dimension: 730/620/H1180 mm -Weight: 73kg

cutting range for steel to: 20,0 Trennschnitt mm cutting range for steel to: 15,0 Qualitätsschnitt mm capacity at 100%: 60 A cutting medium: Druckluft Air consumption: 160 lt/min. bei 5 bar l/min. range L-W-H: 480 x 540 x 920 mm weight: 75 kg Description: - Plasma gas: compressed air - Plasma torch with single connection - high frequency ignition - thermal overload protection - very robust and reliable design - The plasma cutting device JÄCKLE Plasma 60 shines with a very good Price-performance ratio. - This plasma cutter is the ideal system for craft, agriculture, Automotive industry etc ., Furnishing: - with burner model P 70/6 mtr. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Plasma cutting system with possible welding processes: plasma cutting, firing joints; TIG (TIG) on all metals and alloys; MIG on light metals and alloys and heavy metals and arc welding Source: Nertajet HP 120 (220V,24V,380V,415V,440V,500V) Multiple frequencies 50/60Hz burner: CPM 250 (flat electrode) cutting process under water Plasma cutting cutting speed approx. 8m/min. Marking via compressed air driven drills Equipment: rails; Control cabinet; Cutting portal; Tub; Burning pads; 1x Torch Machine dimensions: cutting system: L:4,40xB:2,30xH:1,80m Cutting tables: L:8,44xB:3,31xH:0,85m 2 pcs. Plasma generator connected in parallel Nertajet HP 120: L:0,83xB:0,65xH:1.3 3m Track 1: L:10,650xB:0,25xH:0,92m Left Side Track 2: L:10,650xB:0.25xH:0.57m Right Side Factory conditions:L:3,120xB:1,36xH:0,14m (5 pcs. for cutting table) Water tank: D=1100mm H=2000mm / 1 pc. storage pl ...

; ready for immediate use

Water-cooled plasma cutting system make MESSER GRIESHEIM type HA 95Machine -No: 4030234Technical specifications:Cutting current at 60% duty cycle: 95 AOperating Voltage: 110VOpen Circuit Voltage:260VPower consumption max.:23 kVAMains connection voltage: 220/380/415/500 VDimensions approx.: 70 x 770 x 850 mmApprox. weight: 160 kgwith- Plasma hand cutting torch PHC 95 with hose pack- without rolesusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Air Liquide Plasma tome 25 HPC 2007 construction working area 2m x 4m water table with nivau regulation 1 x Plasma Nertajet HP 125 , cutting up to 25mm

Air Liquide Plasmatome 25 HPC Built in 2007 Work area 2 m x 4 m Water table with Nivauregulierung 1 x plasma Nertajet HP 125, cutting up to 25mm

Plasma cutting machine used, little used, in very good condition. Ideal for the production of angular or round air ducts. Max sheet size: 3000x1500mm Facilities: â?¢ Sectional suction â?¢ Autom. Label â?¢ Production program "ViaDuct" (air duct production) on a separate PC â?¢ Network connection â?¢ Power source:ThermalDynamicsCutmaster A40 Suction filter available in separate display.

With Plasma Cutter SAF NERTAJET HP125.

Plasma cutting machine make L-TEC type Plasmacut 30Fabr. -No: 174895Welding current: 30 AWelding voltage:: 100 VOpen circuit voltage:: 350 VSupply voltage: 380 VWith- hose package- Ground cable- mobileused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Plasma cutting system make SPIROYear of manufacture 2002Technical specifications:Plasma extraction table: 6000 x 1500 mmPlasma source: Hypertherm 1000Feeding and straightening machine: 1500 mmMotorized decoiling system for: 3 coilsCoil weight: 1.25 twith- Hypertherm 63 series- Control Burny 2.8 plus CMW- IOWA precision PCF6016- Spare parts packageusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

SOITAAB CNC plasma cutting with 2 generators Year = 1998 Plant size: center distance = 6000 mm. Useful length 24 thousand mm. Implant length = 26 thousand mm. Speed allowed with double motorization 20 thousand mm./ min. Operating speed up to 5000/6000 mm./min Numerical control = OSAI 10/310 TFT with 10.4 "color monitor Plasma generators No. 2. - Hyperterm HT 2000 System in operation, complete with bench and NOVA VIT fume extractor complete with star valve, direct discharge of cutting dust in standard big bags.

Plasma cutting device TELWIN Type Plasma Arc 65/1 Masch. No. C 10048-88 Year of construction 1988 Power 60 Amp. = 40 % ED 45 Amp. = 60 % ED 32 Amp. = 100 % ED Adjustment range 3 steps Hose pack length approx. 4.5 meters Compressed air connection approx. 6 bar Mains connection 380 Volt, 50 Hz 32 Amp. Plug Space requirement L x W x H 550 x 540 x 910 mm Weight approx. 90 kg good condition; used

Plasma cutting device MB - Welding technology type Plasmaprof 50 Identical to CEBORA Masch. No. 244311 Year of construction approx. 1992 Power 50 Amp. = 35 % ED 30 Amp. = 100 % ED Setting range 2 steps Hose package length approx. 6 meters Compressed air connection 4.7 bar Mains connection 400 Volt, 50 Hz, 32 Amp. Plug Space requirement L x W x H 500 x 350 x 700 mm Weight approx. 80 kg good condition; used

Plasma cutter MESSER GRIESSHEIM Type Plasmastar HA 95 Fabr. No. 4040 Year of construction 1990 Power 95 Amp. - 60 % ED 45 Amp. - 70 % ED Setting range 2 steps Cutting power 25 mm Handheld torch PHC 95 /140 Mains connection 380 Volt, 50 Hz, 32 Amp. Plug- Water-cooled- 8 meters hose package length - Operating instructions Space requirement L x W x H 900 x 480 x 850 mm Weight 160 kg very good condition; used

Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 30 i Supply voltage 1 x 230 volts Setting range 10 – 30 amps Duty cycle 35 % ED at 30 amps 60% ED at 25 amps 100% ED at 21 amps Current adjustment infinitely variable separation cut 10 mm quality cut 8 mm Cooling inverter by built-in fan Cooling burner compressed air-cooled, 50 ltr/min at 4.5 bar Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 480 x 165 x 290 mm Weight with burner 11 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 30 H, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece carrying case impact-resistant, waterproof 1 piece instruction manual Warranty 24 months from date of delivery List ...

Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 45 i Supply voltage 3 x 400 volts Adjustment range 10 – 45 amperes Duty cycle 80 % ED at 45 amps 100% ED at 40 amps Current adjustment infinitely variable separation cut 25 mm quality cut 12 mm Cooling inverter by built-in fan Cooling burner compressed air cooled at 90 ltr/min at 4.5 bar Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 470 x 180 x 230 mm Weight with burner 13 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 45 TT, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece carrying case impact-resistant, waterproof 1 piece instruction manual Warranty 24 months from date of delivery List price dire ...

SAF PLASMATOME 25 plasma cutting machine was built in 2000 in France. The machine, characterised by its rigid and robust design, is designed for precision cutting of sheet metal with a thickness of up to 45 mm. Thanks to the use of double drives on the longitudinal axis, high working speeds are obtained, which result in high quality and accuracy of machining. Workpieces are machined under a water sheet on a large work table measuring (L x W) 6000 mm x 2000 mm, using a cutting head powered by a powerful KJELLBERG PA-S45 W plasma source. The SAF AIR LIQUIDE PLASMATOME 25 plasma cutting machine is controlled by a control panel equipped with a multi-tasking CNC controller DIGISAF, allowing full control of the machine operation. Technical specifications of the SAF PLASMATOME 25 plasma cutting machine - CNC controller: DIGISAF - plasma source: KJELLBERG PA-S45 W - work table surface a ...

Offer 22497 Plasma Cutter Specifications: - Air-cooled plasma cutting system, mobile - Cutting current adjustable in 2 steps 32 + 50 A - Duty cycle 30 A/ 100% ED - 50 A/ 35% ED - max cutting thickness - steel approx. 10 - 15 mm - Alu approx. 15 mm - Stainless steel approx. 10 mm - Cutting gas, compressed air/compressed air - Air connection 6 bar - Connection 400 V / 16 A - with: - Burner package approx. 6000 mm - Ground cable approx. 3000 mm - Space requirement approx. W 480 x H 900 x D 850 mm - Weight approx. 120 kg

Plasma cutting table Brand: SAF / Airliquide / Oerlikon Model: Plasmatome 20 Useful cutting capacity: 2000x6mm * It has rails to expand the cutting length from 6000mm to 8000mm AZURMATIC Aspiration Table of 2000x6000mm (2 modules of 2000x3000mm) CNC: BURNY 3.5 DIGISAF * Complete CNC manual available. Includes computer with the Lantek CadCam and the license backpack. Plasma generator: - Brand: Nertajet - Model: HP120 - Torch: OCP 150 - Cutting capacity:  Carbon Steel: 15mm  Stainless Steel: 15mm  Aluminum: 20mm Equipment description: - It has height control - Double motorization in the portico - Movement speed: 10m / min

Plasma Flour Useful Size 6000 x 2500 Hypertherm HPR 130 Plasma Source Cutting steel from 1.5 mm to 30 mm Stainless steel cutting from 1.5 mm to 20 mm Complete cartridge fume extractor system Visible machine in operation.

Plasma Flour Useful Size 6000 x 2500 Hypertherm HPR 130 Plasma Source Cutting steel from 1.5 mm to 30 mm Stainless steel cutting from 1.5 mm to 20 mm Complete cartridge fume extractor system Visible machine in operation.

1 piece plasma nitriding system Manufacturer: 1 piece used plasma nitriding system (tandem system) Dimensions: Diameter 1500 mm x 1000/2000/3000 mm (depending on whether 1/2/3 segment attachments be used) El. Connection value: 280 kVA It also includes an N2H2 fumigation device as well as an ammonia container. The plant was renewed in 2005. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We accept no liability for used material. Warranty exchange and return are excluded ...